FAAC 400 Positve Stop Kit
Product Description
Internal Positive Stop
For use with the model 400 EG and CBAC actuator
Stainless steel construction
Mounts with existing FAAC hardware and does not require additional mounting points
Accommodates inward or outward
Positive gate stops, which limit the travel of each gate leaf, are required in the opened and closed positions for all FAAC operators. In the past installers used post, rods or angles to make the gates stop at the correct location. Today FAAC offers the innovative Stop-O-Matic Model. An an adjustable gate stop that attaches directly to the gate operator. For aesthetic purposes, this model is totally concealed under the operator cover.
Features include:
Stainless steel construction
Mounts with existing FAAC hardware and does not require additional attachment points
Accommodates inward or outward swing with no additional fabrication
Maximum degrees of swing: limited by operator
Maximum leaf length & weight: limited by operator
Two-Button Switch
Features:
.Switch rating: 250 VAC; 10 amps
.Indoor or outdoor use
.Painted aluminum
.Surface mounted
.Open buatton is N.O. (Normally Opened)
.Close button is N.O. (Normally Opened)
For use with B, C, and P FAAC control panel logics:
B = 3 momentary switches: open, close and stop
C = 2 continuous pressure switches: open and close;
P = 3 momentary switches: open, close.
Dimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep
(10.2 cm x 7.3 cm..
Three-Button Switch
Features:
.Switch rating: 250 VAC; 10 amps
.Indoor or outdoor use
.Painted aluminum
.Surface mounted
.Open buatton is N.O. (Normally Opened)
.Close button is N.O. (Normally Opened)
.Stop button is N.C. (Normally Closed)
For use with B, C, and P FAAC control panel logics:
B = 3 momentary switches: open, close and stop
C = 2 continuous pressure switches: open and close;
1 momentary pressure switch: stop
P = 3 momentary switches: open, clos..
FEATURES:
4 Channel capability/4buttons
Visor clip included
Dimensions: 2" x 2.5" x .5"
Transmitter XT4 works with the Receiver 433 RC Plug In Style..
433 RC Plug in style Single Channel receiver works with the XT4 Transmitter..
This is FAAC model BC pro battery backup system.
FAAC 700i 3523 Dual System Battery Backup 230VAC
(gates open during power outage and remain open until power is restored).
Even if the power outage is prolonged and the batteries die, the gates will
remain open to allow normal ingress and egress during the power outage.
Because the BC Pro and 700I battery backup systems run off the batteries,
gate operation during a power outage is dependant upon the batteries being
well conditioned and..
Monolec Hydraulic Fluid. This oil is the only recommended replacement fluid for all hydraulic gate operators...
FAAC 400 Positve Stop Kit
Product Description
Internal Positive Stop
For use with the model 400 EG and CBAC actuator
Stainless steel construction
Mounts with existing FAAC hardware and does not require additional mounting points
Accommodates inward or outward
Positive gate stops, which limit the travel of each gate leaf, are required in the opened and closed positions for all FAAC operators. In the past installers used post, rods or angles to make the gates stop ..
FAAC 402 Positve Stop Kit
Product Description
Internal Positive Stop
For use with the model 402 actuator
Stainless steel construction
Mounts with existing FAAC hardware and does not require additional mounting points
Accommodates inward or outward
Positive gate stops, which limit the travel of each gate leaf, are required in the opened and closed positions for all FAAC operators. In the past installers used post, rods or angles to make the gates stop at the corre..
FAAC422 Positve Stop Kit
Product Description
Internal Positive Stop
For use with the model 422 actuator
Stainless steel construction
Mounts with existing FAAC hardware and does not require additional mounting points
Accommodates inward or outward
Positive gate stops, which limit the travel of each gate leaf, are required in the opened and closed positions for all FAAC operators. In the past installers used post, rods or angles to make the gates stop at the correct loca..
File Name
Size
Link
FAAC Manual Postive Stops
0.29Mb
download