FAAC 415 Low Voltage 24VDC 115V Swing Gate Operator -Electro Mechanical Single Gate Kit 10441811.5

FAAC 415 Low Voltage 24VDC 115V Swing Gate Operator -Electro Mechanical Single Gate Kit 10441811.5

Call for price

ACCESSORIES & RELATED MODELS

FAAC Photobeam Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..
Questions and estimates
FAAC XT4 Transmitter 433 RC FCC 787453

FAAC XT4 Transmitter 433 RC FCC 787453

FEATURES: 4 Channel capability/4buttons Visor clip included Dimensions: 2" x 2.5" x .5" Transmitter XT4 works with the Receiver 433 RC Plug In Style..
Questions and estimates
FAAC XT4 Wireless Receiver 433 RC Plug In Style 787741

FAAC XT4 Wireless Receiver 433 RC Plug In Style 787741

433 RC Plug in style Single Channel receiver works with the XT4 Transmitter..
Questions and estimates
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
Questions and estimates
FAAC E024U Control Board (enclosure not included) for FAAC S800H, S450H, S418, 770, 415 and 390 202025

FAAC E024U Control Board (enclosure not included) for FAAC S800H, S450H, S418, 770, 415 and 390 202025

The E024U control board can be used with all 24V electro-mechanical and hydraulic swing gate operators. It features easy programming with trimmers and dip switches, powerful switching power supply, one pushbutton automatic self-learning and built-in battery back-up. It operates 6 different operators of the 24V line (S800H, S450H, S418, 770, 415 and 390). The New E024U Control Board is designed to be used with the following FAAC Swing Gate Operators: S418 Electro-mechanical Operator S450H ..
Questions and estimates
FAAC E024U Loop Detector Rack 2670

FAAC E024U Loop Detector Rack 2670

NEEDED Detector Rack needed for EO24U Board if you desire to install loop detectors on the EO24U board...
Questions and estimates

Click Related Tab for more products

The FAAC 415 LOW VOLTAGE Swing Gate Operator is designed to provide power and versatility to an economical residential swing gate operator. This gate operator kit includes a FAAC 415 gate operator, FAAC EO24U Control panel, 14" x 16" enclosure, transformer and two batteries. 25 Cycles per hour. For gates with a maximum weight of 700 lbs per leaf and 15 feet per leaf. Features a sleek design and sealed limit switches!

Kit Includes-1 operator arm,control board, control box, all mounting hardware.

FAAC 415 SPECIFICATIONS:

  • Max Gate Length: 15
  • Max Gate Length w/ External Lock: 15
  • Maximum Force Output: 630
  • Duty: Continuous
  • Cycles Per Hour: 75
  • Power Supply Volts: 24
  • Alt. Power Supply Source: 24V Sources
  • Battery (AC Power Failure): Yes (Optional)
  • Anti-Crushing Protection: Electronic
  • End Travel Declaration: Self-Learning
  • Rod-Effective Stroke (inches): 15 3/4
  • Max Opening Angle: 110
  • Built in Mechanical Stops: No Stops or Limit Switches Required
  • Life Expectations (cycles): 200,000 (10 years @ 55 cycles per day)
  • Transmission: Low-Temp Grease

 

 

 

 

 

 

 

 

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
FAAC Photobeam Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..
Questions and estimates
FAAC XT4 Transmitter 433 RC FCC 787453

FAAC XT4 Transmitter 433 RC FCC 787453

FEATURES: 4 Channel capability/4buttons Visor clip included Dimensions: 2" x 2.5" x .5" Transmitter XT4 works with the Receiver 433 RC Plug In Style..
Questions and estimates
FAAC XT4 Wireless Receiver 433 RC Plug In Style 787741

FAAC XT4 Wireless Receiver 433 RC Plug In Style 787741

433 RC Plug in style Single Channel receiver works with the XT4 Transmitter..
Questions and estimates
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
Questions and estimates
FAAC E024U Control Board (enclosure not included) for FAAC S800H, S450H, S418, 770, 415 and 390 202025

FAAC E024U Control Board (enclosure not included) for FAAC S800H, S450H, S418, 770, 415 and 390 202025

The E024U control board can be used with all 24V electro-mechanical and hydraulic swing gate operators. It features easy programming with trimmers and dip switches, powerful switching power supply, one pushbutton automatic self-learning and built-in battery back-up. It operates 6 different operators of the 24V line (S800H, S450H, S418, 770, 415 and 390). The New E024U Control Board is designed to be used with the following FAAC Swing Gate Operators: S418 Electro-mechanical Operator S450H ..
Questions and estimates
FAAC E024U Loop Detector Rack 2670

FAAC E024U Loop Detector Rack 2670

NEEDED Detector Rack needed for EO24U Board if you desire to install loop detectors on the EO24U board...
Questions and estimates
File Name Size Link
FAAC 415 Low Voltage Install Manual 0.86Mb download
FAAC 415 Spec Brochure 1.18Mb download
FAAC 415 Install Manual 0.86Mb download
FAAC 415 Cutsheet 8.97Mb download
FAAC 415 Manual 0.90Mb download
FAAC E024U Control Board Manual 3.02Mb download