FAAC 415  115V Swing Gate Operator -Electro Mechanical Single Gate Kit 1044182.5

FAAC 415 115V Swing Gate Operator -Electro Mechanical Single Gate Kit 1044182.5

Call for price

ACCESSORIES & RELATED MODELS

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680,  (Replaces 2667 and 2665)

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680, (Replaces 2667 and 2665)

Details Repalces FAAC 2667 and 2665 Loop Detectors 11 Pin Plug in base. Automatic calibration when switching or setting, a USB interface for use with modern diagnostic and service. The same features as the those it replaces.  ..

Linear AK-21W Exterior Digital Keypad ACP00750

Linear AK-21W Exterior Digital Keypad ACP00750

The Model AK-21W Exterior Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp..

FAAC XT4 Wireless Receiver 433 RC Plug In Style  787741

FAAC XT4 Wireless Receiver 433 RC Plug In Style 787741

433 RC Plug in style Single Channel receiver works with the XT4 Transmitter..

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

FAAC XT4 Transmitter 433 RC FCC 787453

FAAC XT4 Transmitter 433 RC FCC 787453

FEATURES: 4 Channel capability/4buttons Visor clip included Dimensions: 2" x 2.5" x .5" Transmitter XT4 works with the Receiver 433 RC Plug In Style..

Click on related products tab

FAAC Residential 415 Electro Mechanical Single Swing Gate Operator Kit.

The Model 415 was designed to provide power and versatility to an economical residential swing operator. It features sleek design and sealed limit switches.  It can operate even in case of power failure(with optional battery back-up).

FAAC 415 Single Swing Gate Operator Kit

Includes:
1 Faac 415 swing gate operators/24V battery backups.
1 10x12 weather proof control box.
1 455D Control Panel.
1 Radio Receiver.
2 Radio Transmitters.
All mounting hardware and EBS wires.

FAAC 415 SPECIFICATIONS:

  • Max Gate Length: 15
  • Max Gate Length w/ External Lock: 15
  • Maximum Force Output: 675
  • Duty: Medium
  • Cycles Per Hour: 25
  • Power Supply Volts: 115
  • Alt. Power Supply Source: BC Pro 1050
  • Battery (AC Power Failure): No
  • Anti-Crushing Protection: Electronic
  • End Travel Declaration: Timed
  • Rod-Effective Stroke (inches): 15 3/4
  • Max Opening Angle: 110
  • Built in Mechanical Stops: No Stops or Limit Switches Required
  • Life Expectations (cycles): 200,000 (10 years @ 55 cycles per day)
  • Transmission: Low-Temp Grease

 

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
FAAC Vehicle loop Detector, Plug-In Loop Detector 2680,  (Replaces 2667 and 2665)

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680, (Replaces 2667 and 2665)

Details Repalces FAAC 2667 and 2665 Loop Detectors 11 Pin Plug in base. Automatic calibration when switching or setting, a USB interface for use with modern diagnostic and service. The same features as the those it replaces.  ..

Linear AK-21W Exterior Digital Keypad ACP00750

Linear AK-21W Exterior Digital Keypad ACP00750

The Model AK-21W Exterior Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp..

FAAC XT4 Wireless Receiver 433 RC Plug In Style  787741

FAAC XT4 Wireless Receiver 433 RC Plug In Style 787741

433 RC Plug in style Single Channel receiver works with the XT4 Transmitter..

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

FAAC XT4 Transmitter 433 RC FCC 787453

FAAC XT4 Transmitter 433 RC FCC 787453

FEATURES: 4 Channel capability/4buttons Visor clip included Dimensions: 2" x 2.5" x .5" Transmitter XT4 works with the Receiver 433 RC Plug In Style..

File Name Size Link
FAAC 415 Spec Brochure 1.18Mb download
FAAC 415 Install Manual 0.86Mb download
FAAC 415 Cutsheet 8.97Mb download
FAAC 415 Manual 0.90Mb download