FAAC  Slide Operator 746 Hydraulic 230V Commercial or Industrial Operator  Chain Operation 109775

FAAC Slide Operator 746 Hydraulic 230V Commercial or Industrial Operator Chain Operation 109775

Call for price

ACCESSORIES & RELATED MODELS

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

FAAC DSP-15 Loop Detector FAIL Safe 2664

FAAC DSP-15 Loop Detector FAIL Safe 2664

SPECIFICATIONS: Dimensions: 4" x .87" x 2.75" 2 Relays Relay A: Provides main detection output, modifiable by delay and extension Relay B: Switch Selectable to 4 options - True presence, Pulse on Exit, Pulse on Enter, Loop fail output Frequency: Automatically tunes to 4 operating frequencies Sensitivity: 10 settings to ensure detection of high bed vehicles Connector: 10 position terminal block (no harness required) Indicators: Separate power/fail and detect LED..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC 1TM 418DS Transmitter Single channel transmitter – 418 Mhz Single channel transmitter – 418 Mhz Choice of over 1000 codes.12V battery included    ..

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC 1RP418DS Receiver for FAAC control panels. Use with 1TM418DS and 787317 transmitters.  ..

Click "Related" tab for more FAAC products

This FAAC 746 is a rack based slide gate operator system. Includes the 746 slide gate opener, control panel, 20 tooth pinion, ounting angle brackets, and limit switch plates. Rack is not included.


KIT INCLUDES:

  • One operator
  • 780D Control Panel (internal)
  • 20 tooth pinion
  • Limit Switch Plates
  • mounting hardware with nickel plated master links
  • ***CHAIN NOT INCLUDED

FEATURES:

  • Features include:
    • 230 VAC
    • External limits
    • Manual release
    • “Soft Stop” on opening and closing
    • 1/2 hp motor
    • Pulling force: 35 lb (16 kg)
    • Speed: 50 ft/min (12 m/min)
    • Gate Weight: 1,400 lb (636 kg)
    • Duty cycle: 70% motor run time

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

FAAC DSP-15 Loop Detector FAIL Safe 2664

FAAC DSP-15 Loop Detector FAIL Safe 2664

SPECIFICATIONS: Dimensions: 4" x .87" x 2.75" 2 Relays Relay A: Provides main detection output, modifiable by delay and extension Relay B: Switch Selectable to 4 options - True presence, Pulse on Exit, Pulse on Enter, Loop fail output Frequency: Automatically tunes to 4 operating frequencies Sensitivity: 10 settings to ensure detection of high bed vehicles Connector: 10 position terminal block (no harness required) Indicators: Separate power/fail and detect LED..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC 1TM 418DS Transmitter Single channel transmitter – 418 Mhz Single channel transmitter – 418 Mhz Choice of over 1000 codes.12V battery included    ..

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC 1RP418DS Receiver for FAAC control panels. Use with 1TM418DS and 787317 transmitters.  ..

File Name Size Link
FAAC 746 Install Manual 0.62Mb download
FAAc 760 with 780D Install Manual 2.00Mb download
FAAC 746 with 780D Instal Manual 2.00Mb download
FAAC 746 Cutsheet 0.15Mb download
FAAC 746 Manual 2.00Mb download