Doorking 9410 Plug-in 1 channel Loop Detector (Doorking Operators Only) 9410-010

Doorking 9410 Plug-in 1 channel Loop Detector (Doorking Operators Only) 9410-010

Call for price

ACCESSORIES & RELATED MODELS

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Reno PLH-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in at loop corner)

Reno PLH-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in at loop corner)

Application: Highways - Install under Asphalt Overlay or Embed in Concrete The Model PLH Preformed Loop is a prefabricated loop / lead-in assembly designed to be overlaid with hot asphalt or embedded in concrete. Each component of the PLH (loop cable, lead-in cable, and splice enclosure) is designed to maximize durability, minimize water penetration, and maintain a flexible form that is easy to install and handle. The low profile loop cable and lead-in cable are 0.360&rdqu..

Reno PLHR-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in at loop corner)

Reno PLHR-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in at loop corner)

Applications: Direct Burial, Dirt or Gravel Roadways The Model PLH-R Preformed Loop is a prefabricated loop / lead-in assembly designed for use in direct burial applications. Each component of the PLH (loop cable, lead-in cable, and splice enclosure) is designed to maximize durability, minimize water penetration, and maintain a flexible form that is easy to install and handle. Wire insulation and cable jackets are constructed with the optimal thickness of Cross-linked Polyethylene (XLPE) nece..

Reno PLH-20-50-RA Preformed Loop (4' X 6' X 50 ft lead-in at loop corner)

Reno PLH-20-50-RA Preformed Loop (4' X 6' X 50 ft lead-in at loop corner)

Application: Highways - Install under Asphalt Overlay or Embed in Concrete The Model PLH Preformed Loop is a prefabricated loop / lead-in assembly designed to be overlaid with hot asphalt or embedded in concrete. Each component of the PLH (loop cable, lead-in cable, and splice enclosure) is designed to maximize durability, minimize water penetration, and maintain a flexible form that is easy to install and handle. The low profile loop cable and lead-in cable are 0.360&rdqu..

Click on the "Related Products" Tab Above for More Models

Loop detectors and loops are strongly recommended on all automated vehicular gate applications to help prevent gates from closing on vehicles in the path of the gate.

DKS Single & Two-Channel Loop Detectors

  • Model 9410-010 DKS Single Channel Loop Detector
  • Model 9409-010 DKS Two Channel Loop Detector
  • Plug‐in detector ‐ use with DKS gate operators only

Reno A&E Loop Detectors

  • Model 9402‐045 Reno A&E 12/24 Volt DC or 24 Volt AC Loop Detector
  • Model 9402-047 Reno A&E 120 Volt AC Loop Detector
  • Reno A&E detectors have 2 relay outputs
  • Reno A&E detectors require 9402‐061 wire harness

Carlo Gavazzi Loop Detectors

  • Model 9402‐044 Carlo Gavazzi 24 Volt AC or DC Loop Detector
  • Carlo Gavazzi detector ‐ 2 relay outputs
  • Requires 9402‐061 wire harness

Diablo Loop Detectors

  • Model 9402‐050 Diablo 10‐30 Volt AC or DC Loop Detector
  • Ultra Low Power for solar applications

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Reno PLH-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in at loop corner)

Reno PLH-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in at loop corner)

Application: Highways - Install under Asphalt Overlay or Embed in Concrete The Model PLH Preformed Loop is a prefabricated loop / lead-in assembly designed to be overlaid with hot asphalt or embedded in concrete. Each component of the PLH (loop cable, lead-in cable, and splice enclosure) is designed to maximize durability, minimize water penetration, and maintain a flexible form that is easy to install and handle. The low profile loop cable and lead-in cable are 0.360&rdqu..

Reno PLHR-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in at loop corner)

Reno PLHR-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in at loop corner)

Applications: Direct Burial, Dirt or Gravel Roadways The Model PLH-R Preformed Loop is a prefabricated loop / lead-in assembly designed for use in direct burial applications. Each component of the PLH (loop cable, lead-in cable, and splice enclosure) is designed to maximize durability, minimize water penetration, and maintain a flexible form that is easy to install and handle. Wire insulation and cable jackets are constructed with the optimal thickness of Cross-linked Polyethylene (XLPE) nece..

Reno PLH-20-50-RA Preformed Loop (4' X 6' X 50 ft lead-in at loop corner)

Reno PLH-20-50-RA Preformed Loop (4' X 6' X 50 ft lead-in at loop corner)

Application: Highways - Install under Asphalt Overlay or Embed in Concrete The Model PLH Preformed Loop is a prefabricated loop / lead-in assembly designed to be overlaid with hot asphalt or embedded in concrete. Each component of the PLH (loop cable, lead-in cable, and splice enclosure) is designed to maximize durability, minimize water penetration, and maintain a flexible form that is easy to install and handle. The low profile loop cable and lead-in cable are 0.360&rdqu..