|
|
 BL-53
Barrier Gate
Parking Systems and Vehicle Access Control,
Public Transportation, and Gates for Toll & Traffic Management. Designed for
system modularity with maximum flexibility, ease of operation and maintenance;
Automatic Systems’ equipment responds to a wide range of facility requirements
while remaining very cost effective.
Call 775-588-1475 for
detailed information and site planning service.
|
BL-53
Industrial Crash Resistant Barrier Gate Operator
|
|
|
|
|
|
INDUSTRIAL GATE OPERATOR
The Model BL53 Industrial
Gate Operator is designed and manufactured by
Automatic Systems. The BL53 is typically
utilized for medium traffic volumes and wide
lane management. It is designed to stand up to
the harshest weather environments and operating
conditions. The BL53 is a real formidable
barrier. It is often times utilized for asset
protection, keeping valuables in, as much as
preventing vehicle access.
The BL53 is most often utilized where vehicle
access protection is critical, and multiple lane
access exists. Common applications include:
Public Highways, Bridge and Tunnel access;
coastal zones, harbour areas, petrochemical
facilities, commercial and industrial garages
and warehouses, etc. The BL53 is capable of
utilizing a heavy-duty barrier arm to a maximum
of 26 feet, and can fully open in 5 to10
seconds.
Installation Manual
|
|
|
SAFETY
1. Completed Cycle
Locking: Barrier arm mechanically locked in the
fully completed 90ş vertical up position, and in
the completed horizontal down position.
2. HD Clutch: Dual
Friction Disk: Torque limiter (Heavy-duty),
which protects the electromechanical drive
system, as well as both vehicles and
pedestrians.
3. Emergency Crank with
safety circuit. Safety valve on handle aperture
4. Barrier arm safety
sensor system. (See options).
5. Power Failure: System
will shut off and the clutch will maintain the
barrier arm in its current position.
|
|
|
|
|
ANTI-CORROSION PAINT
(1) coat of primer paint, (2) component
epoxy micacious iron ore, thickness: 40
µm.
FINISH COAT
(1) coat of (2) component polyurethane
paint, thickness: 40 µm.
Standard color: Orange (RAL 2000).
|
|
|
|
TECHNICAL
CHARACTERISTICS:
|
·MCBF: 6 million
cycles. (Normal maintenance required).
·Certified NBN EN ISO 9001.
|
|
|
|
Barrier arms: |
One-piece oval extruded
aluminium tube, Profile
dimensions: (175mm x 100mm, 6” x
4”) (4mm, 6 gauge) thick. White
enamel finish with red
reflecting stripes |
|
Barrier arm (Boom) length: |
(4.5m to 8m), (14.75ft to 26ft).
·Bracing wires and adjustable
stretchers: Stainless steel. 2
to 4 required depending on boom
length. |
|
Opening time: |
(5 to 10) seconds, depending on
length and weight of the barrier
arm and barrier arm options. |
|
Position of the barrier arm:
|
central. Arm off-set to left or
right-hand side to facilitate a
folding skirt
Tip Support, adjustable height.
Electromechanically locking is
optional. (See Tip Support data
sheet).
|
|
Motor: |
1/2 HP AC - 1625 RPM. |
|
Power supply: |
120V single phase 60Hz |
|
Heavy-duty HD Clutch. |
|
|
Power Consumption: |
Stand-by = 175 W.
In operation = 738 W.
Heater: 125W.
|
|
Gearbox: |
Speed reduction type: VF110/A
ratio of 100:1 |
|
Net weight: |
365Kg to 395Kg, (800lbs to
860lbs.) with barrier arm. |
|
Operation temperatures: |
-25°C to +70° C -13°F to +158°F. |
|
|
|
OPTIONS:
· Barrier Arms: (Boom)
One-piece oval extruded aluminium tube. Profile
dimensions: (175mm x 100mm, 6” x 4”) (4mm, 6
gauge) thick. 4.5M to 8M (14'9'' to 26')
· Boom mounting position is
central. Arm off-set to left or right-hand side
to facilitate a folding skirt, optional.
· Rigid aluminium folding
lower skirt.
· Alternate red and white
plastic link folding skirt.
· Barrier arm safety
pressure switch. (Mounted on lead bottom edge).
· Barrier arm safety sensor
system. (Two types available, please consult).
· Barrier arm tip support.
(Electromagnetically locked tip support,
optional).
· Barrier arm lighting.
(Spacing: one light approximately every 3 feet).
· Flashing relay for arm
lighting.
· Barrier arm signage.
(Please consult).
· Ceramic heater for extreme
cold.
· Cabinet colors other than
the standard orange.
· Installation template
steel base frame.
Note: Adding optional
attachments to the Barrier arm increases weight,
therefore decreasing the maximum available
Barrier arm length.
|
|
|
CONTROLLER OPTIONS:
· Operated via a 3-push
button box (open-stop-close), or automatic
closing with loop detector.
· Automatic opening of a
barrier with one way traffic.
· Automatic opening in one
direction of a bi-directional barrier.
· “Direction Detection”,
which is the automatic closing of the barrier in
both directions and or automatic opening in one
single direction.
· Virtually unlimited
control options.
· Built in “Vehicle
Counters”.
· Actuation devices, such as
push buttons, card reader, ticket dispenser,
token or coin acceptors, vehicle presence
detector + detection loop, etc., for opening or
closing of gate.
|
|
|
BL52 BASE
CONFIGURATION |
CODE |
Type |
|
|
|
BL53 |
CENTRAL OVAL ARM |
4.5 m
[14' 9''] |
EZ1909/038 |
S |
$13,907 |
|
|
5.0 m
[16' 5''] |
EZ1909/039 |
S |
$14,097 |
|
|
5.5 m
[18'] |
EZ1909/040 |
S |
$14,287 |
|
|
6 m
[19' 8''] |
EZ1909/041 |
S |
$14,477 |
|
|
6,5m
[21' 4''] |
EZ1909/042 |
S |
$14,667 |
|
|
7m
[23'] |
EZ1909/043 |
S |
$14,857 |
|
|
7,5m
[24' 7''] |
EZ1909/044 |
S |
$15,047 |
|
|
8m
[26' 3''] |
EZ1909/045 |
S |
$15,237 |
|
|
|
OPTIONS FOR BL5 Series |
CODE |
Type |
|
|
|
ARMS |
|
|
|
|
|
|
|
|
BL52 RIGID ALUMINUM SKIRT (central arm) |
6 m
[19' 8''] |
E/BLOP/230 |
NS |
$1,509 |
|
|
|
6,5m
[21' 4''] |
E/BLOP/231 |
NS |
$1,546 |
|
|
|
7m
[23'] |
E/BLOP/232 |
NS |
$1,595 |
|
|
|
7,5m
[24' 7''] |
E/BLOP/233 |
NS |
$1,652 |
|
|
|
8m
[26' 3''] |
E/BLOP/234 |
NS |
$1,739 |
|
|
|
8,5m
[27' 11''] |
E/BLOP/235 |
NS |
$1,969 |
|
|
|
9m
[29' 6''] |
E/BLOP/236 |
NS |
$2,230 |
|
|
|
9,5m
[31' 2''] |
E/BLOP/237 |
NS |
$2,355 |
|
|
|
10m
[33' 10''] |
E/BLOP/238 |
NS |
$2,688 |
|
|
|
10,5m
[34' 6''] |
E/BLOP/239 |
NS |
$2,810 |
|
|
|
TIP SUPPORTS |
STANDARD |
E/BLOP/005 |
S |
$345 |
|
|
|
ELECTROMAGNETIC |
E/BLOP/006 |
S |
$883 |
|
|
|
FOLDING TIP SUPPORT FOR ARM > 5m [16'] |
E/BLOP/007 |
NS |
$385 |
|
|
|
OVAL ARM TIP SUPPORT (FOR BL33 OR BL53 ONLY) |
STANDARD |
E/BLOP/222 |
NS |
$390 |
|
|
|
ELECTROMAGNETIC |
E/BLOP/223 |
S |
$1,284 |
|
|
CONTROLS & ELECTRONICS |
|
|
|
|
|
|
|
REMOTE CONTROL |
TRANSMITTER 2 CHANNELS |
E/BLOP/133 |
S |
$90 |
|
|
|
RECEIVER 2 CHANNELS WITH TRANSMITTER |
E/BLOP/134 |
S |
$255 |
|
|
|
KEYSWITCH TO BLOCK GATE OPEN |
|
E/BLOP/103 |
S |
$150 |
|
|
|
PUSH BUTTONS BOX |
2
BUTTONS |
E/BLOP/136 |
NS |
$115 |
|
|
|
2
BUTTONS + SELECTOR |
E/BLOP/040 |
S |
$145 |
|
|
|
2
BUTTONS + KEY SWITCH |
E/BLOP/041 |
NS |
$185 |
|
|
|
3
BUTTONS |
E/BLOP/048 |
S |
$155 |
|
|
|
AS1321
BOARD |
ADDITIONNAL I/O (4 IN + 4 OUT) |
E/BLOP/129 |
S |
$369 |
|
|
|
CONFIGURATION AS1320 MASTER/SLAVE |
PROGRAMMING |
E/BLOP/153 |
S |
$175 |
|
|
SIGNALIZATION |
|
|
|
|
|
|
|
RED ARM LIGHT |
1 SET
OF LIGHTS |
E/BLOP/121 |
S |
$145 |
|
|
|
2 SET
OF LIGHTS |
E/BLOP/122 |
S |
$258 |
|
|
|
3 SET
OF LIGHTS |
E/BLOP/123 |
S |
$370 |
|
|
|
4 SET
OF LIGHTS |
E/BLOP/124 |
S |
$483 |
|
|
|
5 SET
OF LIGHTS |
E/BLOP/125 |
S |
$590 |
|
|
|
TRAFFIC
LIGHTS ON BARRIER |
RED/GREEN LIGHTS |
E/BLOP/138 |
NS |
$1,335 |
|
|
|
TRAFFIC
LIGHTS w/MOUNTING SUPPORT |
RED/GREEN LIGHTS |
E/BLOP/139 |
NS |
$1,445 |
|
|
|
STOP
TRAFFIC SIGN |
400 mm
[16''] DIAMETER |
E/BLOP/114 |
S |
$175 |
|
|
OTHERS |
|
|
|
|
|
|
|
HEATING |
FORCED
FAN HEATER (550W) |
E/BLOP/163 |
S |
$235 |
|
|
|
ANTI-CORROSION BASE FOR BL52/53 |
|
E/0172/168 |
NS |
$485 |
|
|
|
NON
STANDARD COLOUR (MINIMUM OF 6 GATES) |
|
E/BLOP/159 |
NS |
$625 |
|
|
|
