Doorking 6300 Gate Opener and gate operator

DKS Gate Operator Accessories

Gate Operators

6002 Light Duty
6050/6100 Residential and Commercial
6300 Commercial and Industrial
6400 Underground
9050/9070 Residential and Light Commercial
9100 Commercial
9150 Commercial and Industrial
9210 Industrial/Maximum Security
9230 Industrial/Maximum Security
9310 Commercial and Industrial
9530/ 9550 Industrial
V-Wheel
Accessories


Download

Literature (ENG)
Literatura (SPA)
Instructions

ADVANCED FEATURES

Self-adjusting, no maintenance magnetic limits.
Overlap feature for dual swing gate operation.
Designed with a built-in primary and secondary entrapment prevention system.
Ports for plug-in loop detectors.
Two convenience outlets.
Fail-safe release.
Tamper detect circuit.
DC Powered convenience open (optional).
Gate tracker reporting output.
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.

OPTIONS AVAILABLE WITH THIS OPERATOR
Master / slave connection cable (slave operator is shipped with 50-feet of cable).
Post or pad mount -specify which.
DC powered convenience open.
Plug-in loop detectors.
Heater kit for cold environments.
Surge suppressors.

Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)

DKS Transmitters & Receivers
DKS Key Switches
Button Switches DKS Slide Accessories Roller Guides
Gate Locks Kits
Magnetic Locks
DKS Gate Hardware

DoorKing 6300 Commercial
and Industrial.

The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

Pad Mount

Post Mount

13.25"W x 12"H* x 28"D

SPECIFICATIONS

Model 6300 with 1/2 HP Motor

Maximum gate width 18-feet.
Maximum gate weight 700 pounds*.
(*Assumes gate swings level and is in good
condition with properly adjusted hardware.
Other external factors may affect the performance
of the gate operator.)
Swings gate 90 degrees in approximately
15-seconds.
1/2 HP continuous-duty motor.
115, 230*, 460* VAC.
Class I, II, III and IV applications.
Dimensions (operator only): 13.25"W x 12"H* x 28"D
(* Height of operator only. Actual height above ground is determined by which mounting method is used)

Model 6300 with 1 HP Motor

Maximum gate width 22-feet.
Maximum gate weight 800 pounds*.
(*Assumes gate swings level and is in good
condition with properly adjusted hardware.
Other external factors may affect the performance
of the gate operator.)
Swings gate 90 degrees in approximately
15-seconds.
1 HP continuous-duty motor.
Class I, II, III and IV applications.
Dimensions (operator only):
13.25"W x 12"H* x 28"D
(* Height of operator only. Actual height above
ground is determined by which mounting
method is used)

We are a DKS Authorized Sales & Service
Distributor. Only buy from an authorized
DKS Distributor for parts and warrantee
repair.

MODEL 6300 RESIDENTIAL SWING GATE OPERATOR - 1/2 HP (Step 1 Select Operator)
PART #	DESCRIPTION	Click For Price
6300-080	6300 Master Operator 115 Volt - 1/2 HP, 115VAC commercial / industrial unit. Control board is mounted in the unit. Handles gates up to 18 feet long. Operator only - must select either post or pad mounting kit.
6300-088	6300 Master Operator 230 Volt - 1/2 HP, 230VAC commercial / industrial unit. Control board is mounted in the unit. Handles gates up to 18 feet long. Operator only - must select either post or pad mounting kit.
6300-092	6300 Master Operator 460 Volt - 1/2 HP, 460VAC commercial / industrial unit. Control board is mounted in the unit. Handles gates up to 18 feet long. Operator only - must select either post or pad mounting kit.
6300-081	6300 Slave Operator -1/2 HP slave operator. Use with 6300-080,088,092 master units. Does not include control board. Operator only - must select either post or pad mounting kit.
MODEL 6300 SWING OPERATOR w/ Battery Backup - 1/2 HP
6300-082	6300 Master Operator with Battery Back-Up 115 Volt - same as 6300-080 master unit Operator only - must select either post or pad mounting kit.
6300-089	6300 Master Operator with Battery Back-Up 230 Volt - same as 6300-088 master unit Operator only - must select either post or pad mounting kit.
6300-093	6300 Master Operator with Battery Back-Up 460 Volt - same as 6300-092 master unit Operator only - must select either post or pad mounting kit.
6300-083	6300 Slave Operator -1/2HP slave operator. Use with 6300-082 and 6300-089 and 6300-093 master units. Does not include control board. Operator only - must select either post or pad mounting kit.

MODEL 6300 RESIDENTIAL SWING GATE OPERATOR - 1 HP (Step 1 Select Operator)
PART #	DESCRIPTION	List Price
6300-084	6300 Master Operator 115 Volt - 1 HP, 115VAC commercial / industrial unit. Control board is mounted in the unit. Handles gates up to 22 feet long. Operator only - must select either post or pad mounting kit.
6300-090	6300 Master Operator 230 Volt - 1 HP, 230VAC commercial / industrial unit. Control board is mounted in the unit. Handles gates up to 22 feet long. Operator only - must select either post or pad mounting kit.
6300-094	6300 Master Operator 460 Volt - 1 HP, 460VAC commercial / industrial unit. Control board is mounted in the unit. Handles gates up to 18 feet long. Operator only - must select either post or pad mounting kit.
6300-085	6300 Slave Operator -1HP slave operator. Use with 6300-084,090,094 master units. Does not include control board. Operator only - must select either post or pad mounting kit.
MODEL 6300 SWING OPERATOR w/ Battery Backup - 1 HP
6300-086	6300 Master Operator with Battery Back-Up 115 Volt - same as 6300-080 master unit Operator only - must select either post or pad mounting kit.
6300-091	6300 Master Operator with Battery Back-Up 230 Volt - same as 6300-088 master unit Operator only - must select either post or pad mounting kit.
6300-095	6300 Master Operator with Battery Back-Up 460 Volt - same as 6300-092 master unit Operator only - must select either post or pad mounting kit.
6300-083	6300 Slave Operator -1/2HP slave operator. Use with 6300-082 and 6300-089 and 6300-093 master units. Does not include control board. Operator only - must select either post or pad mounting kit.
Required Mounting Kits (Step 2 select mount kit)
2600-243	Post Mounting Kit - Post mounting kit allows the operator to be mounted on pipes. Kit includes two 4 inch x 3 foot pipes and necessary hardware. Use this kit with the 6300 operators only.
2600-244	Pad Mounting Kit - pad mounting kit allows the operator to be mounted directly to a concrete pad. Kit includes mounting base and necessary hardware. Use this kit with the 6300 operator only.
9409-010	DoorKing Plug-in 2 Channel Loop Detector
1600-154	Heater kit for 6000 and 9000 operators with fan and thermostat control
2600-754	Master / Slave Interconnect wire 500 ft roll
2600-755	Master / Slave Interconnect wire 30 ft roll
2600-757	Master / Slave Interconnect wire 50 ft roll
9410-010	DoorKing Plug-in 1 Channel Loop Detector