Gate Operators 6002 Light Duty 6050/6100 Residential and Commercial 6300 Commercial and Industrial 6400 Underground 9050/9070 Residential and Light Commercial 9100 Commercial 9150 Commercial and Industrial 9210 Industrial/Maximum Security 9230 Industrial/Maximum Security 9310 Commercial and Industrial 9530/ 9550  Industrial V-Wheel Accessories
Download   Literature (ENG) Literatura (SPA) Instructions
OPTIONS AVAILABLE WITH THIS OPERATOR DC powered convenience open. Nickel plated chain. Stainless steel chain. Plug-in loop detectors. Heater kit for cold environments. Base plate to post mount this operator (does not include posts). Surge suppressors. ADVANCED FEATURES Self-adjusting, no maintenance magnetic limits. Partial-open feature. Anti-tailgating feature. Gate tracker reporting output. Ports for plug-in loop detectors. DC Powered Convenience Open (Optional). Two convenience outlets. Fail-safe release (fail-secure optional). Programming switches. Built-in reset switch. Built-in power On/Off switch. DKS Transmitters & Receivers DKS Key Switches   Button Switches  DKS Slide Accessories  Roller Guides  Gate Locks Kits   Magnetic Locks   DKS Gate Hardware

Compliant with UL 325 and 991.   ETL listed.
(Note: To be compliant with UL 325 and industry safety guidelines, a secondary  entrapment prevention device(s) is required to be installed with this gate operator.  
Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)

DoorKing 9150 Industrial Slide. Model 9150 operators are designed to operate vehicular slide gates in residential, commercial and industrial applications.   These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications.   In addition, the operators can be pad or post mounted to meet any installation requirements.   The 9150 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.

9150 Commercial 15"W x 24"H x 16.5"D

SPECIFICATIONS

Model 9150 with 1/2 HP Motor Maximum gate length 30-feet. Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.   If DC Convenience Open option is installed, maximum gate weight is 1300 pounds.   Other external factors may affect the performance of the gate operator.) 1/2 HP continuous-duty motor. 115, 230*, 460* VAC    (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.) Operator is shipped with chain brackets and 20-feet of #40 chain. Class I, II, III and IV applications. Dimensions: 15"W x 24"H x 16.5"D Model 9150 with 1 HP Motor Maximum gate length 45-feet. Maximum gate weight 1500 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware.   Other external factors may affect the performance of the gate operator.   If DC Convenience Open option is installed, maximum gate weight is 1300 pounds.   Other external factors may affect the performance of the gate operator.) 1 HP continuous-duty motor. 115, 230*, 460* VAC    Operator is shipped with chain brackets and 20-feet of #40 chain. Class I, II, III and IV applications. Dimensions: 15"W x 24"H x 16.5"D

We are a DKS Authorized Sales & Service 
Distributor. Only buy from an authorized
DKS Distributor for parts and warrantee
repair.

Base Plate - use to post mount the 9150 operators. Does not include post.

Heater kit for 6000 and 9000 operators with fan and thermostat control

Master / Slave Interconnect wire 500 ft roll

Master / Slave Interconnect wire 30 ft roll

Master / Slave Interconnect wire 50 ft roll