|
EMX Photoeyes, Timers,
Radio Control for Probe Sensors and Loop Detectors
EMX products are used in
a great spectrum of many residential, commercial and industrial
applications. They help companies in access controls, security, fence,
gate and door operator and parking markets.
EMX NIR Plus Retro-Reflective Photoeyes
- Flexible voltage 12V AC/DC to 230V AC
- Watertight package for reliable outdoor installation
- 45 feet range
- 6 foot cable
- Bracket and mounting hardware included
- Two LED indicators
- Sensitivity adjustment
- Compact packaging Size: 2" high, 2" deep,
0.70" wide lower current draw of only 25mA makes it an excellent choice
for solar and low voltage applications
- Optional protective hood offers additional protection
from the elements and vandalism
- Installation hardware and instructions are included
EMX NIR Cutsheet
For Help and Information please call 775-588-1475 x
152
Description
|
Please click button to see latest pricing |
| EMX NIR Plus to 30 feet |
 |
| EMX NIR Plus to 45 feet |
|
| EMX NIR Hood for
Reflector |
|
New Extended Range IRB-4X!
 EMX
IRB-4X Extended Range
Infrared Photoeye Safety Sensors
The
IRB-4X photocell works without lenses so it is easy to align, making it less
sensitive to fog, dust, snow and sunlight. Used as a reversing, or opening
device in conjunction with automatic operators. Works with any control board
that accepts dry contact in the input. Easy to install, reliable photocell is
used with garage doors, rolling doors, sliding gates, swinging gates, parking
barriers and other equipment.
IRB-4X transmitter and receiver are mounted in line of
sight at a distance of up to 100 feet. When the infrared beam is broken the
internal relay is de-energized and detecting signal is produced on the relay
contacts. The red LED indicator on the receiver is lit when the IRB-4X receiver
is not aligned or when the beam is interrupted.
EMX IRB-4X Cutsheet
For Help and Information please call 775-588-1475 x
152
Description
|
Please click button to see latest pricing |
| EMX
IRB-4X w/o hood |
|
| EMX IRB-HOODAL 1pair
Aluminum Gold anodized |
|
| EMX IRB-HOODST 1pair Steel
Grey Color |
|
|
EMX
IRB-4X Extended Range
Infrared Photoeye Safety Sensors
The IRB-325 photocell is used as an
external entrapment protection device type B1 non-contact sensor for use
with automatic gate operators. The IRB-325 complies with UL325
standards.
Range: 6 to 65 feet
Power: 12V to 24V DC or AC 150mA
Relay Contacts: 30V 1A
Housing: UL and CSA Type 4, 4X, 3, 3R, 12 13 Rating
Dimensions: Height = 5.03, Width = 3.06, Depth = 3.02
Operating Temperature: -40F to +170F
EMX IRB-325 Cutsheet
For Help and Information please call 775-588-1475 x
152
|
|
Description
|
Please click button to see latest pricing |
| EMX
IRB-325 |
|
| EMX IRB-325PT Single Post Mount |
|
 EMX
PC-3 Infrared Modulated Photoeyes PC-3
- Will work with any control board that accepts dry
contact in the safety input.
- LED alignment indicator simplifies installation.
- Supervised relay output provides an "open"
signal in case of power failure.
- Non-reflective through-beam system is not affected by
shiny surfaces.
-
- Modulated infrared beam is not affected by sunlight,
rain, dust or dirt.
- No calibration or sensitivity adjustments are necessary.
- Wide detection angle of 24 degrees simplifies
installation and increases the reliability of operation.
- Indoor or outdoor operation of 30 feet.
EMX IRB-325 Cutsheet
For Help and Information please call 775-588-1475 x
152
Description
|
Please click button to see latest pricing |
| EMX
PC-3 |
|
EMX DTM-9 Seven Day Electronic Programmable Timer
Lower daily use will also allow the use of a smaller
operator and therefore lower the cost of the whole installation. TRAFFIC
CONTROL The DTM-9 will keep your overhead doors, gates and parking barriers
continuously open during rush hours. This will increase comfort and save on
entry and exit times for your employees and customers. MAGNETIC DOOR LOCKS
The DTM-9 will allow you to program the lock out times for your doors with
magnetic locks and electric strikes. FEATURES Has a large display and control
push-buttons for easy operation. Has a back-up rechargeable battery for power
outages or brown outs. The power input is protected by MOV and fuse. Has the flexibility
to program six different events per week. The timer can also program each day
individually or a block of days. Has wide power supply options and can be
ordered in 24V AC or DC, 120V AC, 240V AC. Has manual override for ON or OFF
operation.
DTM-9 Cutsheet
DTM-9 Installation
For Help and Information please call 775-588-1475 x
152
Description
|
Please click button to see latest pricing |
| EMX DTM-9 24VAC |
|
| EMX DTM-9 9 to12VDC |
|
| EMX DTM-9 115VAC |
|
 EMX
LR 650 Long Range Radio Control LR650-KIT
- Up to 650 ft open air range
- Up to 68 billion codes
- Operating frequency 315 MHz Receiver learns up to 15
transmitters, no need to set DIP switches
- Transmitter operates on 12VDC alkaline battery
- Key chain ring included
LR-650 Cutsheet
For Help and Information please call 775-588-1475 x
152
|
Description |
Please click button to see latest pricing |
| EMX
LR-650RX Receiver |
|
EMX
LR-650RX-4X
Receiver in NEMA 4 Housing |
|
EMX
LR-650TX
one Button Transmitter |
|
EMX
LR-652RX
two Channel Receiver |
|
EMX
LR-652TX
two Button Transmitter |
|
| EMX LR-Dipole Antenna |
|
| EMX
LR-650-TX1BVC one Button Transmitter |
|
| EMX
LR-650-TX2BVC two Button Transmitter |
|
| EMX
LR-650-TX4BVC four Button Transmitter |
|
|
