FAAC 844 Slide Gate Operator / Chain 115VAC 1098951.5

FAAC 844 Slide Gate Operator / Chain 115VAC 1098951.5

Call for price

ACCESSORIES & RELATED MODELS

FAAC DSP-15 Loop Detector FAIL Safe 2664

FAAC DSP-15 Loop Detector FAIL Safe 2664

SPECIFICATIONS: Dimensions: 4" x .87" x 2.75" 2 Relays Relay A: Provides main detection output, modifiable by delay and extension Relay B: Switch Selectable to 4 options - True presence, Pulse on Exit, Pulse on Enter, Loop fail output Frequency: Automatically tunes to 4 operating frequencies Sensitivity: 10 settings to ensure detection of high bed vehicles Connector: 10 position terminal block (no harness required) Indicators: Separate power/fail and detect LED..
Questions and estimates
FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC 1RP418DS Receiver for FAAC control panels. Use with 1TM418DS and 787317 transmitters.  ..
Questions and estimates
FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC 1TM 418DS Transmitter Single channel transmitter – 418 Mhz Single channel transmitter – 418 Mhz Choice of over 1000 codes.12V battery included    ..
Questions and estimates
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
Questions and estimates
FAAC Photobeam Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..
Questions and estimates
Upswung Residential or Commercial Complete Gate Entry and Exit Accessory package. Includes intercom, loops,keypad and wireless receiver and transmitters

Upswung Residential or Commercial Complete Gate Entry and Exit Accessory package. Includes intercom, loops,keypad and wireless receiver and transmitters

This specially designed  package covers all of  your Commercial/Residential needs for Entry and Exit access control to and from your property. Whether it be a Swing Style or Slide Style or Barrier Operator this package offer is complete for a commercial activity envrioment that offers a security event control, tracking operation.   Please call for expert assistance regarding any and all Access Control devices or for package upgrades and specifice item information at 775-588-1..
Questions and estimates

THE MODEL 844 designed for limited duty industrial applications. Available in chain and rack&pinion versions. Model 844 has 2 year limited warranty MODEL 844 CHAIN KITS INCLUDE: Operator Control panel (844 MPS) Sprocket Idlers and protective cover Easy install limit switch plates Mounting angle brackets Chain-to-gate mounting hardware with nickel plated master links Chain is not included
MODEL 844 RACK & PINION KITS INCLUDE: Operator Control panel (844 MPS) Pinion Mounting angle bracket Limit Switch plates.

  • Ideal for commercial and industrial applications
  • Anti-crushing safety
  • As the gearmotor is non reversing, no electric locks need be installed
  • In the event of power failure, the key-operated release device makes it possible
  to open and close the gate manually
  • Twin-disk clutch in oil-bath
  • Inductive or magnetic travel limit (according to model).External limits

  •  VACManual release (non-keyed)
  • “Soft Stop” on opening and closing
  • 3/4 hp motor
  • Oil immersed clutch which, when properly adjusted,
    limits the amount of pressure the operator can apply to moving the gate.
  • Duty Cycle: 70% motor run time
  • Microprocessor control: Choose from 4 operating modes.
  • 230 VAC 

    Power supply voltage 230 Vac (+6% -10%) 50 (60) Hz

    Absorbed power 650 W

    Absorbed current 3.5 A

    Traction and thrust force 0-110 daN (Z16)

    Motor rotation speed 1400 r.p.m.

    Reduction ratio 1:30

    Operating ambient temperature -20 °C to +55 °C

    Weight with oil 14.5 kg

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
FAAC DSP-15 Loop Detector FAIL Safe 2664

FAAC DSP-15 Loop Detector FAIL Safe 2664

SPECIFICATIONS: Dimensions: 4" x .87" x 2.75" 2 Relays Relay A: Provides main detection output, modifiable by delay and extension Relay B: Switch Selectable to 4 options - True presence, Pulse on Exit, Pulse on Enter, Loop fail output Frequency: Automatically tunes to 4 operating frequencies Sensitivity: 10 settings to ensure detection of high bed vehicles Connector: 10 position terminal block (no harness required) Indicators: Separate power/fail and detect LED..
Questions and estimates
FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC 1RP418DS Receiver for FAAC control panels. Use with 1TM418DS and 787317 transmitters.  ..
Questions and estimates
FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC 1TM 418DS Transmitter Single channel transmitter – 418 Mhz Single channel transmitter – 418 Mhz Choice of over 1000 codes.12V battery included    ..
Questions and estimates
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
Questions and estimates
FAAC Photobeam Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..
Questions and estimates
Upswung Residential or Commercial Complete Gate Entry and Exit Accessory package. Includes intercom, loops,keypad and wireless receiver and transmitters

Upswung Residential or Commercial Complete Gate Entry and Exit Accessory package. Includes intercom, loops,keypad and wireless receiver and transmitters

This specially designed  package covers all of  your Commercial/Residential needs for Entry and Exit access control to and from your property. Whether it be a Swing Style or Slide Style or Barrier Operator this package offer is complete for a commercial activity envrioment that offers a security event control, tracking operation.   Please call for expert assistance regarding any and all Access Control devices or for package upgrades and specifice item information at 775-588-1..
Questions and estimates
File Name Size Link
FAAC 844 Spec Brochure 0.15Mb download
FAAC 844 INstall Manual 0.68Mb download
FAAC 844 Cutsheet 0.15Mb download
FAAC 844 Manual 4.26Mb download