FAAC 400 CBAC 115V Standard Heavy Duty Hydraulic Operator Single Gate Kit w/Arctic Oil 10420112.5+

FAAC 400 CBAC 115V Standard Heavy Duty Hydraulic Operator Single Gate Kit w/Arctic Oil 10420112.5+

Call for price

ACCESSORIES & RELATED MODELS

FAAC 400 Positive Stop 84-400 4 Rod Conceale 490109  d

FAAC 400 Positive Stop 84-400 4 Rod Conceale 490109 d

FAAC 400  Positve Stop Kit Product Description Internal Positive Stop For use with the model 400 EG and CBAC actuator Stainless steel construction Mounts with existing FAAC hardware and does not require additional mounting points Accommodates inward or outward Positive gate stops, which limit the travel of each gate leaf, are required in the opened and closed positions for all FAAC operators. In the past installers used post, rods or angles to make the gates stop ..

FAAC XT4 Transmitter 433 RC FCC 787453

FAAC XT4 Transmitter 433 RC FCC 787453

FEATURES: 4 Channel capability/4buttons Visor clip included Dimensions: 2" x 2.5" x .5" Transmitter XT4 works with the Receiver 433 RC Plug In Style..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Linear AK-21W Exterior Digital Keypad ACP00750

Linear AK-21W Exterior Digital Keypad ACP00750

The Model AK-21W Exterior Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp..

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

Click the "Related Products" tab above for more choices

The Model 400 hydraulic ram arm swing gate operator is specifically designed for situations needing maximum versatility, such as certain apartment, subdivision, commercial/industrial and residential applications. Its strength also makes the 400 an excellent choice for large, ornate gates. Hydraulic swing gate operators are inherently safer than other types of operators because they do not have "pinch points. In addition, FAAC operators are equipped with a hydraulic bypass valve for extra anti-entrapment protection, and a manual release that allows the gate to be operated in an emergency, such as power failure. A battery back-up unit is also available The versatile FAAC control panel allows for six operating modes including garage-door-like operation, and a HOLD OPEN function. The 400 can be mounted inside the gate and still allow the gate to open to the inside or to the outside.


 Features/Single Arm Full Kit

  • One 400 hydraulic gate operator
  • Mounting hardware
  • One 455 D control panel
  • One 14 x 16 in. weather resistant UL Listed fiberglass enclosure
  • One or two manual release keys
  • FAAC Wireless Radio Receiver with 2 Transmitters. XT4 433mhz
  • 115 VAC receptacle for accessories (5 amp max.)
  • ON/OFF switch controlling power to control panel, accessories and plug outlet
  • Large pre-wired terminals for easy wiring to control panel
  • Test button
  • Two warning signs
  • UL325 compliant
    *Postive Stop Required Sold Separately

     
  • Application:
    Apartment, Subdivision, Commercial, Industrial, Residential
  • Maximum Gate Swing: 115 degrees
  • Opening Time: 17 seconds
  • Maximum weight 1300 pounds per gate
  • Maximum length: 16 feet per gate
  • Cycles: 80 per hour
  • Dimensions: 40.5 x 3.35 x 3.35

 

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
FAAC 400 Positive Stop 84-400 4 Rod Conceale 490109  d

FAAC 400 Positive Stop 84-400 4 Rod Conceale 490109 d

FAAC 400  Positve Stop Kit Product Description Internal Positive Stop For use with the model 400 EG and CBAC actuator Stainless steel construction Mounts with existing FAAC hardware and does not require additional mounting points Accommodates inward or outward Positive gate stops, which limit the travel of each gate leaf, are required in the opened and closed positions for all FAAC operators. In the past installers used post, rods or angles to make the gates stop ..

FAAC XT4 Transmitter 433 RC FCC 787453

FAAC XT4 Transmitter 433 RC FCC 787453

FEATURES: 4 Channel capability/4buttons Visor clip included Dimensions: 2" x 2.5" x .5" Transmitter XT4 works with the Receiver 433 RC Plug In Style..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Linear AK-21W Exterior Digital Keypad ACP00750

Linear AK-21W Exterior Digital Keypad ACP00750

The Model AK-21W Exterior Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp..

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

File Name Size Link
FAAC 400 Install Manual 1.01Mb download
FAAC 400 Cutsheet 1.52Mb download
FAAC 400 Manual 1.01Mb download