FAAC 400 CBAC-R Rapid Hydraulic 115V Swing Gate Operator (Arm Only) 10420712

FAAC 400 CBAC-R Rapid Hydraulic 115V Swing Gate Operator (Arm Only) 10420712

Call for price

ACCESSORIES & RELATED MODELS

FAAC 400 CBAC-EG 115V Extended Geometry Hydraulic  Swing Gate Operator w/ Arctic Oil (Arm Only) 104202125

FAAC 400 CBAC-EG 115V Extended Geometry Hydraulic Swing Gate Operator w/ Arctic Oil (Arm Only) 104202125

Click the "Related Products" tab above for more choices The Model 400 hydraulic swing gate operator is specifically designed for situations needing maximum versatility, such as certain apartment, subdivision, commercial/industrial and residential applications. Its strength also makes the 400 an excellent choice for large, ornate gates. Hydraulic swing gate operators are inherently safer than other types of operators because they do not have "pinch points. In addition, FAAC operat..

FAAC 400  CBAC 115V Standard Heavy Duty  Hydraulic (Arm Only) Swing Gate Operator w/ Arctic Oil 10420112

FAAC 400 CBAC 115V Standard Heavy Duty Hydraulic (Arm Only) Swing Gate Operator w/ Arctic Oil 10420112

Click the "Related Products" tab above for more choices The Model 400 hydraulic ram arm swing gate operator is specifically designed for situations needing maximum versatility, such as certain apartment, subdivision, commercial/industrial and residential applications. Its strength also makes the 400 an excellent choice for large, ornate gates. Hydraulic swing gate operators are inherently safer than other types of operators because they do not have "pinch points. In addition, F..

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

FAAC 400 Positive Stop 84-400 4 Rod Conceale 490109  d

FAAC 400 Positive Stop 84-400 4 Rod Conceale 490109 d

FAAC 400  Positve Stop Kit Product Description Internal Positive Stop For use with the model 400 EG and CBAC actuator Stainless steel construction Mounts with existing FAAC hardware and does not require additional mounting points Accommodates inward or outward Positive gate stops, which limit the travel of each gate leaf, are required in the opened and closed positions for all FAAC operators. In the past installers used post, rods or angles to make the gates stop ..

FAAC XT4 Transmitter 433 RC FCC 787453

FAAC XT4 Transmitter 433 RC FCC 787453

FEATURES: 4 Channel capability/4buttons Visor clip included Dimensions: 2" x 2.5" x .5" Transmitter XT4 works with the Receiver 433 RC Plug In Style..

The Model 400 hydraulic ram arm swing gate operator is specifically designed for situations needing maximum versatility, such as certain apartment, subdivision, commercial/industrial and residential applications. Its strength also makes the 400 an excellent choice for large, ornate gates. Hydraulic swing gate operators are inherently safer than other types of operators because they do not have "pinch points. In addition, FAAC operators are equipped with a hydraulic bypass valve for extra anti-entrapment protection, and a manual release that allows the gate to be operated in an emergency, such as power failure. A battery back-up unit is also available The versatile FAAC control panel allows for six operating modes including garage-door-like operation, and a HOLD OPEN function. The 400 can be mounted inside the gate and still allow the gate to open to the inside or to the outside. 
*Postive Stop Required Sold Separately

 

 

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
FAAC 400 CBAC-EG 115V Extended Geometry Hydraulic  Swing Gate Operator w/ Arctic Oil (Arm Only) 104202125

FAAC 400 CBAC-EG 115V Extended Geometry Hydraulic Swing Gate Operator w/ Arctic Oil (Arm Only) 104202125

Click the "Related Products" tab above for more choices The Model 400 hydraulic swing gate operator is specifically designed for situations needing maximum versatility, such as certain apartment, subdivision, commercial/industrial and residential applications. Its strength also makes the 400 an excellent choice for large, ornate gates. Hydraulic swing gate operators are inherently safer than other types of operators because they do not have "pinch points. In addition, FAAC operat..

FAAC 400  CBAC 115V Standard Heavy Duty  Hydraulic (Arm Only) Swing Gate Operator w/ Arctic Oil 10420112

FAAC 400 CBAC 115V Standard Heavy Duty Hydraulic (Arm Only) Swing Gate Operator w/ Arctic Oil 10420112

Click the "Related Products" tab above for more choices The Model 400 hydraulic ram arm swing gate operator is specifically designed for situations needing maximum versatility, such as certain apartment, subdivision, commercial/industrial and residential applications. Its strength also makes the 400 an excellent choice for large, ornate gates. Hydraulic swing gate operators are inherently safer than other types of operators because they do not have "pinch points. In addition, F..

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

FAAC 400 Positive Stop 84-400 4 Rod Conceale 490109  d

FAAC 400 Positive Stop 84-400 4 Rod Conceale 490109 d

FAAC 400  Positve Stop Kit Product Description Internal Positive Stop For use with the model 400 EG and CBAC actuator Stainless steel construction Mounts with existing FAAC hardware and does not require additional mounting points Accommodates inward or outward Positive gate stops, which limit the travel of each gate leaf, are required in the opened and closed positions for all FAAC operators. In the past installers used post, rods or angles to make the gates stop ..

FAAC XT4 Transmitter 433 RC FCC 787453

FAAC XT4 Transmitter 433 RC FCC 787453

FEATURES: 4 Channel capability/4buttons Visor clip included Dimensions: 2" x 2.5" x .5" Transmitter XT4 works with the Receiver 433 RC Plug In Style..

File Name Size Link
FAAC 400 Spec Brochure 0.47Mb download
FAAC 400 Install Manual 1.01Mb download
FAAC 400 Cutsheet 1.52Mb download
FAAC 400 Manual 1.01Mb download