FAAC Swing Gate Operator FSW900/DSW2000 24VDC Pad Mount ElectroMechanical.

FAAC Swing Gate Operator FSW900/DSW2000 24VDC Pad Mount ElectroMechanical.

Call for price

ACCESSORIES & RELATED MODELS

Linear AK-21W Exterior Digital Keypad ACP00750

Linear AK-21W Exterior Digital Keypad ACP00750

The Model AK-21W Exterior Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp..
Questions and estimates
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
Questions and estimates
FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC 1TM 418DS Transmitter Single channel transmitter – 418 Mhz Single channel transmitter – 418 Mhz Choice of over 1000 codes.12V battery included    ..
Questions and estimates
FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC 1RP418DS Receiver for FAAC control panels. Use with 1TM418DS and 787317 transmitters.  ..
Questions and estimates
FAAC Vehicle loop Detector, Plug-In Loop Detector 2680, (Replaces 2667 and 2665)

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680, (Replaces 2667 and 2665)

Details Repalces FAAC 2667 and 2665 Loop Detectors 11 Pin Plug in base. Automatic calibration when switching or setting, a USB interface for use with modern diagnostic and service. The same features as the those it replaces.  ..
Questions and estimates
Upswung Residential or Commercial Complete Gate Entry and Exit Accessory package. Includes intercom, loops,keypad and wireless receiver and transmitters

Upswung Residential or Commercial Complete Gate Entry and Exit Accessory package. Includes intercom, loops,keypad and wireless receiver and transmitters

This specially designed  package covers all of  your Commercial/Residential needs for Entry and Exit access control to and from your property. Whether it be a Swing Style or Slide Style or Barrier Operator this package offer is complete for a commercial activity envrioment that offers a security event control, tracking operation.   Please call for expert assistance regarding any and all Access Control devices or for package upgrades and specifice item information at 775-588-1..
Questions and estimates
FAAC Photobeam Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..
Questions and estimates

Click Related Tab for more products

Pad Mount Series From FAAC fromerly Duraslide and Duraswing
FSL700 24VDC Commercial Slide Gate Operator
FSW900 24VDC Commercial Swing Gate Operator

Easy installation, Full Feature, Built-in battery backup system . Operates vehicular gates for high traffic and residential applications and is ideal for custom homes, apartments, self storage, and other commercial applications. . Multi-Function battery backup is a standard feature built-in and offers main power fail and low battery control of the gate during a power
failure. . The 24VDC direct drive motor to gearbox design offers high power efficiency while reducing costs and added parts. . Built in soft start soft stop control offers a smooth, more quiet operation and is easier on the gate and gate installation. . Simple to install design offers mulitple prewired terminals, LED indicators, installation handles, accessory shelves, and is easy to access and set limits. . Wireless master slave is simple to install and eliminates the need
for underground wire.

*800lb gate weight capacity at 18ft max length.


Operator Features
. Built-in battery backup standard
. Soft Start Soft Stop smooth operation
. Heavy duty gearbox and 24VDC motor direct drive design
. Simple, clean design with less moving parts
. Fail safe design with tamper detect feature on FSL700 slide
gate operator
. Release handle with optional padlock on FSW900 swing
gate operator
. Zinc galvanized steel frame with handles for easy installation
. FSW900’s claim shell cover can be removed without removing swing
arm
. FSL700 uses a UV protected polyethelene cover with lift
handle slots
. Easy access limits are simple to set
. Battery & accessory shelves
. Adjustable chain idlers for front, rear, and post mount slide gates
. Industry standard swing arm for swing gate applications
. Plug-in loop detector inputs: reverse, open, center (shadow)
. (2) AC accessory power plugs
. Built-in 3-Button control for easy setup
. Multiple terminal inputs for simple, clean wire installation
. Maglock, solenoid, external alarm outputs
. Power fail option can open or cycle gate
. Low battery option can open or cycle gate
. Anti-Tailgate & Quick Close features standard
.** Wireless master slave option means no underground wiring.

 

 

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Linear AK-21W Exterior Digital Keypad ACP00750

Linear AK-21W Exterior Digital Keypad ACP00750

The Model AK-21W Exterior Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp..
Questions and estimates
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
Questions and estimates
FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC 1TM 418DS Transmitter Single channel transmitter – 418 Mhz Single channel transmitter – 418 Mhz Choice of over 1000 codes.12V battery included    ..
Questions and estimates
FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC 1RP418DS Receiver for FAAC control panels. Use with 1TM418DS and 787317 transmitters.  ..
Questions and estimates
FAAC Vehicle loop Detector, Plug-In Loop Detector 2680, (Replaces 2667 and 2665)

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680, (Replaces 2667 and 2665)

Details Repalces FAAC 2667 and 2665 Loop Detectors 11 Pin Plug in base. Automatic calibration when switching or setting, a USB interface for use with modern diagnostic and service. The same features as the those it replaces.  ..
Questions and estimates
Upswung Residential or Commercial Complete Gate Entry and Exit Accessory package. Includes intercom, loops,keypad and wireless receiver and transmitters

Upswung Residential or Commercial Complete Gate Entry and Exit Accessory package. Includes intercom, loops,keypad and wireless receiver and transmitters

This specially designed  package covers all of  your Commercial/Residential needs for Entry and Exit access control to and from your property. Whether it be a Swing Style or Slide Style or Barrier Operator this package offer is complete for a commercial activity envrioment that offers a security event control, tracking operation.   Please call for expert assistance regarding any and all Access Control devices or for package upgrades and specifice item information at 775-588-1..
Questions and estimates
FAAC Photobeam Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..
Questions and estimates
File Name Size Link
FAAC FSW 900 Install Manual 2.53Mb download
FAAC FSW 900 Install Brochure 0.94Mb download
FAAC FSW 900 Cutsheet 1.21Mb download
FAAC FSW 900 Manual 1.47Mb download