FAACSwing Operator 390  24V/115V Compact(for pillars and columns)  Electro Mechanical 104572.5E+

FAACSwing Operator 390 24V/115V Compact(for pillars and columns) Electro Mechanical 104572.5E+

Call for price

ACCESSORIES & RELATED MODELS

FAAC E024U Loop Detector Rack 2670

FAAC E024U Loop Detector Rack 2670

NEEDED Detector Rack needed for EO24U Board if you desire to install loop detectors on the EO24U board...

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680,  (Replaces 2667 and 2665)

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680, (Replaces 2667 and 2665)

Details Repalces FAAC 2667 and 2665 Loop Detectors 11 Pin Plug in base. Automatic calibration when switching or setting, a USB interface for use with modern diagnostic and service. The same features as the those it replaces.  ..

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

FAAC XT4 Transmitter 433 RC FCC 787453

FAAC XT4 Transmitter 433 RC FCC 787453

FEATURES: 4 Channel capability/4buttons Visor clip included Dimensions: 2" x 2.5" x .5" Transmitter XT4 works with the Receiver 433 RC Plug In Style..

FAAC XT4 Wireless Receiver 433 RC Plug In Style  787741

FAAC XT4 Wireless Receiver 433 RC Plug In Style 787741

433 RC Plug in style Single Channel receiver works with the XT4 Transmitter..

EMX Blueguard BlueTooth/Cell Phone Remote Controller

EMX Blueguard BlueTooth/Cell Phone Remote Controller

Turn Cell Phones into Universal Controls.   Switch almost anything ON/OFF with your iPhone, Android, BlackBerry or Bluetooth enabled cell phone. BlueGuard recognizes your organization's cell phones when they move into range or when a PIN code is keyed into the cell phone. The possibilities are endless and the user capacity unlimited. Use the BlueGuard... There are two models of BlueGuard available: BlueGuard Free Entry is activated as soon as the phone gets into the 33..

Click related tab for more products

 The FAAC 390 swing gate opener -perfect for stone wall and column/pillar- was designed primarily for residential use by FAAC. Continuous duty, 600 lbs maximum gate weight per leaf, and 14 ft. maximum gate length per leaf. Low voltage gate operator. This model provides easy installation, and no gate modifications are necessary. The FAAC 390 operates in case of power failure with optional battery backup. Purchase with confidence, knowing that FAAC Gate Operators are built to produce the longest life, most reliable and safest opening systems on the market.

FAAC 390 Swing Gate Opener Basic Single Kit includes:

1 390 compact operator 24V/115V
FAAC EO24U Control board 
14" x 16" enclosure weatherproof/fiberglass
transformer
2 batteries
2 limit switches.

*To expand to a Bi/parting gate system simply purchase the 390 arm only.

 

FAAC 390 Swing Gate Opener Basic Single Specifications:

  • Duty Cycle: 100%
  • Max Gate Swing: 120 Degrees
  • Max Weight Per Leaf: 600 lbs
  • Max Length Per Leaf: 14 feet
  • Operating Temp: -4F - 131F
  • Absorbed Power: 3W
  • Protection Class: Nema 4x

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
FAAC E024U Loop Detector Rack 2670

FAAC E024U Loop Detector Rack 2670

NEEDED Detector Rack needed for EO24U Board if you desire to install loop detectors on the EO24U board...

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680,  (Replaces 2667 and 2665)

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680, (Replaces 2667 and 2665)

Details Repalces FAAC 2667 and 2665 Loop Detectors 11 Pin Plug in base. Automatic calibration when switching or setting, a USB interface for use with modern diagnostic and service. The same features as the those it replaces.  ..

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

FAAC XT4 Transmitter 433 RC FCC 787453

FAAC XT4 Transmitter 433 RC FCC 787453

FEATURES: 4 Channel capability/4buttons Visor clip included Dimensions: 2" x 2.5" x .5" Transmitter XT4 works with the Receiver 433 RC Plug In Style..

FAAC XT4 Wireless Receiver 433 RC Plug In Style  787741

FAAC XT4 Wireless Receiver 433 RC Plug In Style 787741

433 RC Plug in style Single Channel receiver works with the XT4 Transmitter..

EMX Blueguard BlueTooth/Cell Phone Remote Controller

EMX Blueguard BlueTooth/Cell Phone Remote Controller

Turn Cell Phones into Universal Controls.   Switch almost anything ON/OFF with your iPhone, Android, BlackBerry or Bluetooth enabled cell phone. BlueGuard recognizes your organization's cell phones when they move into range or when a PIN code is keyed into the cell phone. The possibilities are endless and the user capacity unlimited. Use the BlueGuard... There are two models of BlueGuard available: BlueGuard Free Entry is activated as soon as the phone gets into the 33..

File Name Size Link
FAAC 390 Spec Brochure 1.13Mb download
FAAC 390 Install Manual 0.66Mb download
FAAC 390 Cutsheet 1.13Mb download
FAAC 390 Manual 4.06Mb download
FAAC E024U Control Board Manual 3.02Mb download