Sales of Magnetic gate locks and Electric Gate Locks.

EAGLE Gate Hardware

4 inch V-Groove Wheel,slide gate wheels,gate accessories,gate hardware,sliding gate hardware

4" V-Groove Wheel - The 4" V-Groove solid steel wheels have sealed bearings and are "yellow" zinc plated. The sealed bearings allow the gate to move freely, resulting in less strain on the operator and fewer service calls in the future. Each single packaged wheel includes an axel bolt and nut. These precision wheels can handle up to a 3000 lb. gate, ensuring years of service.

Guide Rollers,roller guides,gate accessories,gate hardware,sliding gate hardware

Guide Rollers - These rollers have sealed bearings, zinc plated brackets, and are made of UHMW plastic. Our guide rollers help reduce friction and assist in a smoother operating gate and track. These rollers come in either black or white and are available in 4", 6", and 12" sizes.

Roller Chains,sliding gate chain,gate accessories,gate hardware,sliding gate hardware

All of our heavy-duty chains are nickel-plated and come with all of our sliding gate operators. The Model 41-1R and the Model 40-1R come in 10' boxes. The Model 41-1R and 40-1R also are available in 100' reels.

Fire Lock Boxes Fire-2000,gate access control,gate hardware,gate accessories

The Model Fire-2000 uses a micro switch to open the gate. It is made of 14-gauge steel, powder coated bright red. The front door has a hole for a standard padlock, which can be removed by the Fire Department. A blank label on the inside of the door is provided for written instructions and there is ample room for stored "gate release" keys. Dimensions: 6" (H) x 5 1/2" (W) x 3" (D)

Fire Lock Boxes Fire-2010, gate access control,gate hardware,gate accessories

The Model Fire-2010 has an Ace cylinder lock that also has an additional hole to accept a Knox KS-2 key lock. This can be purchased from your Fire Department. It is made of 14-gauge steel, powder coated bright red, and is labeled with a Fire Dept. label on the front cover. Dimensions: 6" (H) x 5 1/2" (W) x 3" (D)

Fire Lock Boxes Fire-2070,gate access control,gate hardware,gate accessories The Model Fire-2070 is easily used in a power failure as an emergency release by pulling on the handle. It has a bright red powder coat finish with a Fire Dept. label on both sides. Dimensions: 6" (H) x 4 1/2" (W) x 4" (D)

Key Lock Boxes Key-2020,gate access control,gate hardware,gate accessories

Key-2020: The Model-2020 has an Ace cylinder lock, as well as a Mortise cylinder lock with a limit switch. The Ace lock gives access to the box itself, while the Mortise lock (which can be keyed to the house locks) gives momentary contact to open and close the gate. The rugged black steel box with stainless steel faceplate has punch-outs for surface or post mounting. Two keys are supplied for each lock. Dimensions: 5 1/2" (H) x 41/2" (W) x 4" (D)

Key Lock Boxes Key-2030,gate access control,gate hardware,gate accessories Key-2030: The Model 2030 has two Ace cylinder locks that are keyed separately. The top lock gives access to the box itself, while the bottom lock gives momentary contact to open or close the gate (the key is removable in the "closed" position only). Construction and mounting features are the same as the Model-2030 and two keys are also supplied for each lock. Dimensions: 5 1/2" (H) x 41/2" (W) x 4" (D)

Key Lock Boxes Key-2040,gate access control,gate hardware,gate accessories Key-2040: The Model-2040 has two Ace cylinder locks that are keyed separately. The top lock gives access to the box itself, while the bottom lock gives momentary contact to open or close the gate (the key is removable in either position). The construction and mounting features are the same as the previous models and two keys are provided for each lock. Dimensions: 5 1/2" (H) x 41/2" (W) x 4" (D)

Pedestal-Pad Mount,surface mount goosenecks

Pedestal-Pad Mount - The Pad Mount Pedestal has a 90° sweep to allow easy access. The Pas Mount dimensions are 2" x 2" x 42" long x 1/8" thick. The accessory plate is 4" x 4" x 1/8" steel with 4 slotted 1/4" holes foe accessory mounting, as wall as a 2" square opening for wiring. All of the pedestals parts are black powder coated.

The In-Ground Pedestal has the same features as the "Pad Mount" pedestal, with the exception of the primary dimensions which are 2" x 2" x 62" x 1/8" thick.

EAGLE PART	DESCRIPTION	Internet Price
EFB-2000	Fire Box w/ Pad Lock Design	$64.00
EFB-2010	Fire Box w/ Knox Key Switch	$64.00
EKB-2020	Key Box w/ Mortise Cylinder	$112.00
EKB-2030	Key Box (Off Only)	$108.00
EKB-2040	Key Box (On/Off)	$108.00
EFB-2070	Fire Box w/ Chain Release	$92.00
EFB-2070-K	Fire Box Parts Kit	$45.00
EP-1	Pedestal - In Ground	$112.00
EP-11	Pedestal - Pad Mount	$112.00
EVGW	V-Groove Wheels - 4" Solid Steel Wheels	$42.00
EGR-4-W	Guide Roller - 4" White Rollers	$20.00
EGR-6-W	Guide Roller - 6" White Rollers	$20.00
EGR-12-W	Guide Roller - 12" White Rollers	$32.00
EGR-4-13	Guide Roller - 4" Black Rollers	$20.00
EGR-6-B	Guide Roller - 6" Black Rollers	$20.00
EGR-12-B	Guide Roller - 12" Black Rollers	$29.00