HySecurity HRG220 Swing Gate Operators that Lift the gate as they swing by 12 inches.

The HRG 220 swing gate operator comes in several versions, can operate gate up to 16 feet long and up to 3000lbs. Battery operated versions available. These operators RISE as they open. From the closed position, they raise vertically four inches, which automatically disengages, engages a locking pin from a socket in the driveway. The lift over the full rotation is twelve inches, and raises the gate over such obstacles as snow and inclines. Rated for continuous duty. The HRG operator is also very handsome when used with ornamental iron gates. An 82" post is standard, and custom taller heights are available. The unique post system blends well when aesthetics are a consideration.
This operator was the first of the security gate operators to use hy-power. Its proven design has been in continuous production and refinement for over twenty years. the HRG 220 series operator is the only truly industrial-grade swing gate operator on the market today. This tough operator is ideally suited to dependable operation of massive iron or steel gates. Its 3000lbs capacity provides plenty of power, and the Lift and Swing feature eliminates normal obstacles such as heavy fall and incline of irregular roadways. Operator's mechanism is wholly enclosed in the post and uses no other devices to push or pull on the gate panel. Its closing action actuates a locking pin at the end of the gate.

HRG 220 SERIES SWING GATE OPERATOR SPECIFICATIONS: available in either single leaf (HRG220) or double leaf, bi-parting (HRG 222) HRG 220A - gates up to 13ft, weight up to 1000lbs, 14sec to open or close the gate HRG 220B - gates up to 16ft, weight from 1000lbs to 1600lbs, 19sec to open or close the gate HRG 220C - gates up to 16ft, weight from 1600lbs to 3000lbs, 30secs to open or close the gate arc of swing set at factory: 90° standard power pack and electric panel are designed to be remotely located twelve inch raise in the opening cycle hadles awkward inclines easily closing action drops locking pin at the end of gate into socket in driveway operator post is treated with an industrial galvanized flame spray finish to provide excellent corrosion resistance all components are designed for easy removal during service the hydraulic system features the latest technology, modular manifolds and individually replaceable cartridge valves. fully compatible with all standard access control equipment accessories include heaters, timers detectors, photo eyes, gate edges, release for manual operation, hand pumps, and master / slave units extended five-year warranty Installation manual Installation Manual Click on Picture- Swing Configuration (right/ left) PRODUCT CUTSHEET

When placing a shopping cart order you will be contacted by an Upswung Representative to ensure that your order is correct and complete.