Programming is accomplished via the HPP-22 Hand Held Programmer. Cards can be added or deleted from the access privilege database, the door can be unlocked as would normally be done during business hours, and the operator’s security PIN (personal identification number) can be changed, all by simply pointing the programmer at the reader and issuing a simple command.

Because the IP-2000 also has a 26 bit Wiegand™ output, it can be used in place of a traditional proximity reader with any manufacturer’s access system to provide user backup should the primary system become non-functional for those users with 24 hour access privileges; and be used to upgrade a larger system should the user want to expand beyond a single door. The relay output can also be used to trigger any other type of device based on a successful card event. Product features are as follows.

As a Single Door System

• Relay Output for Electric Strike/Lock
• Nonvolatile Memory for up to 500 users
• Five Superior Proximity Reader Styles to Choose From
• Simple Programming via RF Hand Held Programmer
• Door Sense Input to Monitor Status
• Local Door Held Open Alarm
• Request to Exit Input
• Multicolor LED and Audio Tone for User Feedback
• Can Be Used When System Expands Beyond One Door via 26-bit
     Wiegand™ output

In Place of a Standard Proximity Reader

• Industry Standard 26-bit Wiegand™ Output
• Five Superior Proximity Reader Styles to Choose From
• Local Door Control Backup for Primary Controller
• Longer Cable Runs
• Better Surge/Transient Protection for Primary Controller
• Multicolor LED and Audio Tone for User Feedback

D-Lite Software
D-Lite software gives IP-2000 users great features such as:

• A computerized cardholder database that is sort-able, much like an Excel spreadsheet, that removes the requirement to keep a manual card holder list
• The ability to backup the database
• The ability to program the IP-2000 without requiring the use of the HPP-22
• The ability to manage more than one IP-2000 database from the same PC

Use Reader Models

• IP-2003 - use the MS-3000 MicroStar Proximity Reader
• IP-2004 - use the MS-4000 ShootingStar Proximity Reader
• IP-2005 - use the MS-5000 MiniStar Proximity Reader
• IP-2007 - use the MS-7000 SuperStar Proximity Reader