Commercial Slide Kit Our Favorit

DKS 9150 Commercial Slide Kit

Doorking 9150 Commercial Slide Gate Opener

APPLICATIONS:
Model 9150 operators are designed to operate vehicular slide gates in residential, commercial and industrial applications. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operators can be pad or post mounted to meet any installation requirements. The 9150 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.
ADVANCED FEATURES:
Self-adjusting, no maintenance limits. Partial-open feature. Anti-tailgating feature. Gate tracker reporting output. Ports for plug-in loop detectors. DC Powered Convenience Open (Optional). Two convenience outlets. Fail-safe release (fail-secure optional). Programming switches. Built-in reset switch. Built-in power On/Off switch.
SPECIFICATIONS:
Model 9150 with 1/2 HP Motor:
Maximum gate length 30-feet. Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.) 1/2 HP continuous-duty motor. 115 VAC 230 VAC 460 VAC Operator is shipped with chain brackets and 20-feet of #40 chain. Class I, II, III and IV applications. Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.) Dimensions: 15"W x 24"H x 16.5"D
Model 9150 with 1 HP Motor:
Maximum gate length 45-feet. Maximum gate weight 1500 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.) 1 HP continuous-duty motor. 115 VAC 230 VAC 460 VAC Operator is shipped with chain brackets and 20-feet of #40 chain. Class I, II, III and IV applications. Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.) Dimensions: 15"W x 24"H x 16.5"D
OPTIONS AVAILABLE WITH THIS OPERATOR:
DC powered convenience open. Stainless steel housing. Nickel plated chain. Stainless steel chain. Plug-in loop detectors. Heater kit for cold environments. Base plate to post mount this operator (does not include posts
We are a DKS Authorized Sales & Service Distributor.
Only buy from an authorized DKS Distributor for parts and warrantee repair.
DKS 9150 Installation Manual

MODEL 9150 COMMERCIAL / INDUSTRIAL SWING GATE OPERATOR - 1/2HP
Models can be purchased as a package which include: specific gate opener model + 2 x MLT3089 single button multi code transmitter + MLTA1099 multi code receiver.
PART #	DESCRIPTION	List Price	Internet Price
DK9150-084	9150 Operator - 1/2HP, 115VAC commercial / industrial unit designed for gates up to 30 ft long weighting up to 1000lbs. Gate speed is approximately 1ft/sec. Full feature circuit board. Includes 20 feet of #40 chain.	$2270.00	$1361.00
DK9150-085	9150 Operator - 1/2HP, 230VAC commercial / industrial unit designed for gates up to 30 ft long weighting up to 1000lbs. Gate speed is approximately 1ft/sec. Full feature circuit board. Includes 20 feet of #40 chain	$2670.00	$1605.00
DK9150-090	9150 Operator - 1/2HP, 460VAC commercial / industrial unit designed for gates up to 30 ft long weighting up to 1000lbs. Gate speed is approximately 1ft/sec. Full feature circuit board. Includes 20 feet of #40 chain.	$2670.00	$1605.00
DK9150-086	9150 Operator with Battery Back Up - 1/2HP, 115VAC same as 9150-084 but includes a battery powered drive system designed to open the gate during power outages. Includes 20 feet of #40 chain.	$3010.00	$1813.00
DK9150-087	9150 Operator with Battery Back Up - 1/2HP, 220VAC same as 9150-085 but includes a battery powered drive system designed to open the gate during power outages. Includes 20 feet of #40 chain.	$3410.00	$2057.00
DK9150-091	9150 Operator with Battery Back Up - 1/2HP, 460VAC same as 9150-090 but includes a battery powered drive system designed to open the gate during power outages. Includes 20 feet of #40 chain.	$3410.00	$2057.00

MODEL 9150 COMMERCIAL / INDUSTRIAL SWING GATE OPERATOR - 1HP
* below models can be purchased as a package which include: specific gate opener model + 2 x MLT3089 single button multi code transmitter + MLTA1099 multi code receiver. Click the box in "option" field to do so.
PART #	DESCRIPTION	List Price	Internet Price
DK9150-080	9150 Operator - 1HP, 115VAC commercial / industrial unit designed for gates up to 45 ft long weighting up to 1500lbs. Gate speed is approx. 1ft/sec. Full feature circuit board. Includes 20 feet of #40 chain.	$2760.00	$1843.75
DK9150-081	9150 Operator - 1HP, 230VAC commercial / industrial unit designed for gates up to 45 ft long weighting up to 1500lbs. Gate speed is approx. 1ft/sec. Full feature circuit board. Includes 20 feet of #40 chain.	$3160.00	$2167.75
DK9150-088	9150 Operator - 1HP, 460VAC commercial / industrial unit designed for gates up to 45 ft long weighting up to 1500lbs. Gate speed is approx. 1ft/sec. Full feature circuit board. Includes 20 feet of #40 chain.	$3160.00	$2167.95
DK9150-082	9150 Operator with Battery Back Up - 1HP, 115VAC same as 9150-080 but includes a battery powered drive system designed to open the gate during power outages. Includes 20 feet of #40 chain.	$3500.00	$2251.50
DK9150-083	9150 Operator with Battery Back Up - 1HP, 220VAC same as 9150-081 but includes a battery powered drive system designed to open the gate during power outages. Includes 20 feet of #40 chain.	$3900.00	$2651.50
DK9150-089	9150 Operator with Battery Back Up - 1/2HP, 460VAC same as 9150-088 but includes a battery powered drive system designed to open the gate during power outages. Includes 20 feet of #40 chain.	$3900.00	$2651.50

MODEL 9150 SLIDE OPERATOR ACCESSORIES
PART #	DESCRIPTION	List Price	Internet Price
DK2600-441	#41 Chain - 20 feet of #41 chain and two master links	$74.00	$48.00
DK2600-442	#40 Chain - 20 feet of #40 chain and two master links	$103.00	$68.00
DK2600-448	#60 Chain - 20 feet of #60 chain and two master links	$155.00	$102.00
DK0920-035	Mounting Stand - heavy duty pedestal mount stand for the 9200 operator.	$777.00	$512.00

Quantity Needed: 1 or 2
(one for entry & one for exiting)

Linear AK-1 Standalone Keypad

Self-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilities.
Rugged, cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal.
Four independent outputs and timers: two form C relays and two solid-state open collector outputs.
Up to 480 programmable input codes of one to six digits each for activating either or both relays.
more info

Linear Access	List Price	Internet Price
AK1 ACP00738	$289.00	$190.00

Quantity Needed: 2 or 3
(two for safety & one for exiting)

EMX PR48 Safety Loops and Detector with Harness.
Two Safety Loops are needed for each side of the gate to override gate operation when a car is in the way.
A third can used as a free exit loop.

Rugged and flexible TPE tubing with overall diameter of 0.26 inches suitable for saw cut, tar and concrete installation.
Includes electronic lightning protection of vehicle detectors. Comes with 60 feet of twisted and jacketed lead-in wire.
more info

EMX Preformed Loops Loop, harness & Detector Kit
PR-26	2' by 4' loop	$235.00
PR-46	4' by 6' loop	$235.00
PR-48	4' by 8' loop	$236.00

Quantity Needed: 1

EMX NIR Plus Retro-Reflective Photoeyes
Pedestrian sensing between gate posts.

Flexible voltage 12V AC/DC to 230V AC
Watertight package for reliable outdoor installation
45 feet range
6 foot cable
Bracket and mounting hardware included
Two LED indicators
Sensitivity adjustment
more info

EMX

List Price

Internet Price

EMX NIR Plus

$249.00

$147.50

Miscellaneous Products	List Price	Internet Price
MicroPLUS Keychain Transmitters	$35.00	$27.00
MicroPLUS Visor Clip	$9.00	$5.00
MicroPLUS Receiver Required for transmitters DKS 8055-080	$80.00	$49.00
MillerEdge Safety Edge Kit- 4 ft with transmitter, receiver and sensor edge.	$445.00	$235.00
Key Pad Pedestal- For Autos Info	$312.00	$139.00
Dbl. Pedestal- Auto & Semi Trucks Info	$489.00	$299.00
Magnetic Lock for High Security Info	$349.00	$219.00