Commercial Slide Kit Our Favorit

DKS 9100 Commercial Slide Kit

Doorking 9200 Commercial Slide Gate Opener

APPLICATIONS:
Model 9200 operators are designed to operate vehicular slide gates in limited (Class III) and restricted (Class IV) applications only. These operators should never be used in applications serving the general public. These operators are designed so that they can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. Center mounting the operator requires an optional pedestal mounting base.
ADVANCED FEATURES:
Direct driven limit nuts. Partial-open feature. Anti-tailgating feature. Gate tracker reporting output. Ports for plug-in loop detectors. Two convenience outlets. Fail-secure operation, includes crank for manual operation. Programming switches. Built-in reset switch. Built-in power On/Off switch.
SPECIFICATIONS:
Model 9200: Maximum gate length 100-feet. Maximum gate weight 3000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.) 40:1 gear reduction running in a continuous oil bath. 1 HP continuous-duty motor. 115 VAC 208 VAC 230 VAC 460 VAC Operator is shipped with chain brackets and 20-feet of #60 chain. Class III and IV applications only. Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.) Dimensions: 16"W x 34"H x 16"D
OPTIONS AVAILABLE:
Heavy-duty pedestal mounting stand. (Recommended for gates over 30-feet to allow use of a chain support rail). Plug-in loop detectors. Heater kit for cold environments.
We are a DKS Authorized Sales & Service Distributor.
Only buy from an authorized DKS Distributor for parts and warrantee repair.

MODEL 9200 INDUSTRIAL SLIDE GATE OPERATOR - 1HP
PART #	DESCRIPTION	List Price	Internet Price
DK9200-091	9200 Operator - 1HP, 115VAC Single Phase. Industrial unit designed for limited access gates up to 1000 feet long weighting up to 3000 pounds. Not intended for residential or commercial applications serving the general public. gate speed is approx. 10 in/sec. Includes 20 feet of #60 chain.	$4450.00	$2619.00
DK9200-092	9200 Operator - 1HP, 230VAC Single Phase. Same as 0920-080 but is powered by 230 volt. Single phase power.	$4500.00	$2650.00
DK9200-084	9200 Operator - 1HP, 208Volt Three Phase. Same as 0920-080 but is powered by 208 volt. Three phase power	$4500.00	$2680.00
DK9200-082	9200 Operator - 1HP, 230Volt Three Phase. Same as 0920-080 but is powered by 230 volt. Three phase power	$4550.00	$2680.00
DK9200-083	9200 Operator - 1HP, 460Volt Three Phase. Same as 0920-080 but is powered by 460 volt. Three phase power	$4550.00	$2580.00

MODEL 9150 SLIDE OPERATOR ACCESSORIES
PART #	DESCRIPTION	List Price	Internet Price
DK2600-441	#41 Chain - 20 feet of #41 chain and two master links	$74.00	$48.00
DK2600-442	#40 Chain - 20 feet of #40 chain and two master links	$103.00	$68.00
DK2600-448	#60 Chain - 20 feet of #60 chain and two master links	$155.00	$102.00
DK0920-035	Mounting Stand - heavy duty pedestal mount stand for the 9200 operator.	$777.00	$512.00

Quantity Needed: 1 or 2
(one for entry & one for exiting)

Linear AK-1 Standalone Keypad

Self-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilities.
Rugged, cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal.
Four independent outputs and timers: two form C relays and two solid-state open collector outputs.
Up to 480 programmable input codes of one to six digits each for activating either or both relays.
more info

Linear Access	List Price	Internet Price
AK1 ACP00738	$289.00	$190.00

Quantity Needed: 2 or 3
(two for safety & one for exiting)

EMX PR48 Safety Loops and Detector with Harness.
Two Safety Loops are needed for each side of the gate to override gate operation when a car is in the way.
A third can used as a free exit loop.

Rugged and flexible TPE tubing with overall diameter of 0.26 inches suitable for saw cut, tar and concrete installation.
Includes electronic lightning protection of vehicle detectors. Comes with 60 feet of twisted and jacketed lead-in wire.
more info

EMX Preformed Loops Loop, harness & Detector Kit
PR-26	2' by 4' loop	$235.00
PR-46	4' by 6' loop	$235.00
PR-48	4' by 8' loop	$236.00

Quantity Needed: 1

EMX NIR Plus Retro-Reflective Photoeyes
Pedestrian sensing between gate posts.

Flexible voltage 12V AC/DC to 230V AC
Watertight package for reliable outdoor installation
45 feet range
6 foot cable
Bracket and mounting hardware included
Two LED indicators
Sensitivity adjustment
more info

EMX

List Price

Internet Price

EMX NIR Plus

$249.00

$147.50

Miscellaneous Products	List Price	Internet Price
MicroPLUS Keychain Transmitters	$35.00	$27.00
MicroPLUS Visor Clip	$9.00	$5.00
MicroPLUS Receiver Required for transmitters DKS 8055-080	$80.00	$49.00
MillerEdge Safety Edge Kit- 4 ft with transmitter, receiver and sensor edge.	$445.00	$235.00
Key Pad Pedestal- For Autos Info	$312.00	$139.00
Dbl. Pedestal- Auto & Semi Trucks Info	$489.00	$299.00
Magnetic Lock for High Security Info	$349.00	$219.00