Sales of Automatic Gate Openers, Electric Gate Openers and FAAC 400

DKS 9100 Kit
Doorking Model 9100 Slide Gate Opener

APPLICATIONS:
The Model 9100 operator is designed to operate vehicular slide gates in residential and commercial applications. The 9100 is designed so that it can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operator can be pad or post mounted to meet any installation requirements.
ADVANCED FEATURES:
Self-adjusting, no maintenance limits. Partial-open feature. Anti-tailgating feature. Gate tracker reporting output. Ports for plug-in loop detectors. Two convenience outlets. Fail-safe release (fail-secure optional). Programming switches. Built-in reset switch. Built-in power On/Off switch.
SPECIFICATIONS:
Model 9100 Maximum gate length 30-feet. Maximum gate weight 1000 pounds*. (*Assumes gate is on level ground, in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.) 1/2 HP continuous-duty motor. 115 VAC, 5.4 Amps. Operator is shipped with chain brackets and 20-feet of #41 chain. Class I, II, III and IV applications. Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
OPTIONS AVAILABLE WITH THIS OPERATOR: Stainless steel housing. #40 chain. Nickel plated chain. Stainless steel chain. Plug-in loop detectors. Heater kit for cold environments. Base plate to post mount this operator (does not include posts).
We are a DKS Authorized Sales & Service Distributor.
Only buy from an authorized DKS Distributor for parts and warrantee repair. DKS 9100 Installation Manual

MODEL 9100 COMMERCIAL SLIDE GATE OPERATORS
PART #	DESCRIPTION	LIST PRICE	INTERNET PRICE
DK9100-080	9100 Operator - 1/2HP, 115VAC commercial unit designed for gates up to 30 feet long weighting up to 1000lbs. gate speed is approximately 1 ft/sec. Full feature circuit board. Includes 20 feet of #41 chain.	$2190.00	$1269.95

MODEL 9050 & 9070 SLIDE OPERATOR OPTIONS
PART #	DESCRIPTION	List Price	Internet Price
DK2600-443	Nickel Plated Chain - 10 feet of #41 roller chain and two master links	$49.00	32.00
DK2600-444	Nickel Plated Chain - 10 feet of #40 roller chain and two master links	$75.00	50.00
DK2600-475	Stainless Steel Chain - 20 feet of #41 roller chain and two master links	$305.00	201.00

MODEL 9050 & 9070 SLIDE OPERATOR ACCESSORIES
PART #	DESCRIPTION	List price	Internet Price
DK2600-441	#41 Chain - 20 feet of #41 chain and two master links	$74.00	$48.00
DK2600-442	#40 Chain - 20 feet of #40 chain and two master links	$103.00	$68.00
DK2600-448	#60 Chain - 20 feet of #60 chain and two master links	$155.00	$102.00
DK2600-862	Lock-Kit - retro-fit kit to change solenoid function on the 9050 and 9070 operators from fail-safe to fail-secure	$20.00	$13.00
DK2600-418	Base Plate - use to post mount the 9050 and 9070 operators. Does not include post.	$48.00	$31.00
DK9409-010	DoorKing Plug-in 2 Channel Loop Detector	$360.00	$270.00
DK9410-010	DoorKing Plug-in 1 Channel Loop Detector	$190.00	$142.50

Quantity Needed: 1 or 2
(one for entry & one for exiting)

Linear AK-1 Standalone Keypad

Self-contained keyless entry system ideal for airports, hospitals, warehouses, office buildings, parking lots, and many other commercial facilities.
Rugged, cast aluminum enclosure for indoor or outdoor mounting on a wall or pedestal.
Four independent outputs and timers: two form C relays and two solid-state open collector outputs.
Up to 480 programmable input codes of one to six digits each for activating either or both relays.
more info

Linear Access	List Price	Internet Price
AK1 ACP00738	$289.00	$190.00

Quantity Needed: 1 or 2
(one for safety & one for exiting)

EMX PR48 Safety Loops and Detector with Harness.
Two Safety Loops are needed for each side of the gate to override gate operation when a car is in the way.
A third can used as a free exit loop.

Rugged and flexible TPE tubing with overall diameter of 0.26 inches suitable for saw cut, tar and concrete installation.
Includes electronic lightning protection of vehicle detectors. Comes with 60 feet of twisted and jacketed lead-in wire.
more info

EMX Preformed Loops Loop, harness & Detector Kit
PR-26	2' by 4' loop	$235.00
PR-46	4' by 6' loop	$235.00
PR-48	4' by 8' loop	$236.00

Quantity Needed: 1

EMX NIR Plus Retro-Reflective Photoeyes
Pedestrian sensing between gate posts.

Flexible voltage 12V AC/DC to 230V AC
Watertight package for reliable outdoor installation
45 feet range
6 foot cable
Bracket and mounting hardware included
Two LED indicators
Sensitivity adjustment
more info

EMX

List Price

Internet Price

EMX NIR Plus

$249.00

$147.50

Miscellaneous Products	List Price	Internet Price
MillerEdge Safety Edge Kit- 4 ft with transmitter, receiver and sensor edge.	$445.00	$235.00
Key Pad Pedestal- For Autos Info	$312.00	$139.00
Dbl. Pedestal- Auto & Semi Trucks Info	$489.00	$299.00
Magnetic Lock for High Security Info	$349.00	$219.00

HM series Receivers for all Gate Openers

External 8" whip antenna included.
Security+® rolling code technology and/or billion code/DIP switch compatibility
12 volt DC or 18 - 35 volts AC/DC jumper selectable
Normal security memory stores up to 31 LiftMaster® remote control codes of any type
FCC certified 315 or 390MHZ
3-year warranty HM series Manual 423LM Manual
33LM Manual

Receiver	Mhz	Internet Price
312HM (new freq.)	315 MHz	$59.00
33LM 3 Channel Transmitter for 423LM	315 MHz	$35.00

Liftmaster transmitters,Liftmaster radio controls,Chamberlain remote controls,gate opener remote controls,Chamberlain transmitters

970LM & 390LM mini three-button remote control
- Features Security+ rolling code technology
- Keychain loop
- 5-year 3V lithium battery included

Transmitter	Mhz	Internet Price
970LM (old freq.)	390 Mhz	$27.00
370LM (new freq.)	315 Mhz	$27.00

971LM & 371LM single-button remote control
- Features Security+ rolling code technology
- Directional visor clip included
- 5-year 3V lithium battery included

Transmitter	Mhz	Internet Price
971LM (old freq.)	390 Mhz	$27.00
371LM (new freq.)	315 Mhz	$27.00

972LM two-button remote control
- Both buttons features Security+ rolling code technology
- Second button can "learn" other shared LiftMaster radio-controlled devices
- Directional visor clip included
- Two 5-year 3V lithium battery included

Transmitter	Mhz	Internet Price
972LM (old freq.)	390 Mhz	$35.00
372LM (new freq.)	315 Mhz	$35.00

973LM three-button remote control
- Each button features Security+ rolling code technology
- Directional visor clip included
- 5-year 3V lithium battery included

Transmitter	Mhz	Internet Price
973LM (old freq.)	390 Mhz	$37.00
373LM (new freq.)	315 Mhz	$37.00

973W designer simulated burled walnut three-button remote control
- Each button features Security+ rolling code technology
- Directional visor clip included
- 5-year 3V lithium battery included