Linear (OSCO) Operators
MODEL VS-GSWG Light Duty Slide Gate Opener

linear osco swg gate operator

Mechanical

Heavy-duty 60:1 right-angle C-face gear reducer
Adjustable torque limiter
Linear drive arm
Heavy-duty pillow-block bearings

VS-GSWG Commercial Industrial
The Linear/OSCO Model VS-GSWG is a heavy-duty variable speed swing gate operator designed for smooth, secure and reliable operation of large, heavy swing gates. The positive locking linear drive arm design provides enhanced security, plus increased ability to withstand high wind loads - especially important for large, heavy gates. The VS-GSWG features the same proven and reliable UL325/UL991 compliant solid state control circuitry as the rest of the Linear/OSCO family of gate operators and is available in 1/2, 1 or 2 HP, 115V-460V single- or three-phase power. The VS-GSWG utilizes an inherent current sensing system for entrapment protection and is listed for use in UL class I-IV applications.

Common Features

Crank style
Black UV stabilized polyethylene cover
Pad mount standard; post mount optional
Exterior reset button
UL325/UL991 compliant APeX controller
Fully integrated radio receiver
Manual release is located inside the operator enclosure

Warning Signals:

Warning beeper to sound when gate is moving

linear osco SWG

Installation Manual

Electrical

Variable speed - soft start/soft stop programmable through an inverter motor control (voltage & phase of input power supply required at time of order)
Available from 1/2 to 2 HP industrial continuous-duty, three-phase, 56-frame motor
Available in all standard voltages and phases
Run timer for clutch and motor protection
Delay on reverse
Master/Slave capability built in
Easily convertible right hand/left hand
Solid state control circuit
Double C-face brake
Power on/off switch
Duplex receptacle on 115 VAC units
Three-button control station included
Accessory connections are 24-volt AC or DC
Easily adjustable rotary limit switches
Full system capable for access controls and reversing devices

Standard Convenience Features

Exterior reset button
Power on/off button
Accessory power outlet on115V machines
Integrated 3-button station

Includes APeX Controller with integrated radio receiver, plug-in loop detector capability, surge protection, and easy to read labeling standard

CAUTION

Automatic gates not for pedestrians
Automatic gate operators designed for vehicular traffic only; operators are powerful and can cause serious injury or death; DIRECT ALL PEDESTRIAN TRAFFIC TO SEPARATE PEDESTRIAN GATE
UL 325 requires use of contact or non-contact anti-entrapment devices
ASTM F2200 requires that all exposed rollers are covered

osco gate operator

Model	HP	Voltage	Ship Wt	Max Gate Weight	Maximum Gate Length	Gate Open Time	Click for Internet Price
SWG-2/115	1/2	115	275 lbs	700 lbs	18 ft	15 Sec
SWG-2/230	1/2	230	275 lbs	700 lbs	18 ft	15 Sec
SWG-4/115	3/4	115	275 lbs	900 lbs	22 ft	15 Sec
SWG-4/230	3/4	230	275 lbs	900 lbs	22 ft	15 Sec
SWG-1/115	1/2	115	275 lbs	1000 lbs	26 ft	15 Sec
SWG-1/230	1/2	230	275 lbs	1000 lbs	26 ft	15 Sec
3 Phase Option		Upcharge for 208, 230, 460 3 phase option (we call you to confirm voltage)