Linear OSCO Operators
MODEL SWD Commercial SWING GATE OPENER

Swing Automatic Gate Operators Specifications

• 24 VDC Permanent Magnet Motor
• 115 VAC supply converted to 24 VDC for motor and controls
• Power on/off switch
• Emergency stop/reset button on front cover
• Three-button control station included
• Accessory connection are 24-VDC
• Easily Adjustable cam limit switches
• Full system capable for access controls and reversing devices.

• Dual Batteries charged by 114 VAC or optional Solar Panels
• Charging circuit monitors and maintains
  • batter levels
  • monitors AC presence
  • switches to batteries if AC power is lost
  • automatically resumes AC operation when AC power is restored
• Field-selectable power loss option:
  • Option 1: Fail safe (opens the gate and shuts down until AC poser is restored
  • Option 2: Fail secure (continues to cycle gate in normal operation until batteries run down and then fail safe/opens the gate. Resumes normal operation when AC power is restored or when solar panels have sufficiently charged batteries)

• Durable, weather-resistant, UV-Stabilized polyethylene one-piece cover
• Removable and lockable access door

• Pad mounting standard
• Optional Post mounting Kit available (See below)

Mechanical Swing Automatic Gate Operators Specifications

• Right-angle gear reducer
• One-inch diameter output shaft
• Optional adjustable torque limiter available
• Heavy-duty pillow block bearings

• Solid state circuit board, 24 VDC
• Inherent current sensing system
• 15 LED's for easy setup and troubleshooting
• Built in Maximum run timer and auto close timer
• Right-hand/left-hand easy conversion
• Master/Slave-simple three-wire connection
• Entrapment alarm