SEA Libra Half Tank AC 115V Hydraulic Swing Gate Operator Replacement Arm 104AC3SO-1A-CSA

SEA Libra Half Tank AC 115V Hydraulic Swing Gate Operator Replacement Arm 104AC3SO-1A-CSA
Qty:

SEA Libra Half Tank AC 115V Hydraulic Swing Gate Operator Replacement Arm 104AC3SO-1A-CSA

Click on the "Related Tabs" above for more models
SEA Half Tank - Hydraulic Swing Operator For Commercial Use

• Commercial Hydraulic swing operator for leaf length up to 13 feet
• SEA Total Quality: all parts are manufactured and tested in-house.
• The hydraulic system grants high and long term performances.
• By-pass valve as an Anti-Crush safety system.
• Electronic slow-down in opening and closing (GATE 2).
• Electronic Reversing Sensor available on request (SAFETY GATE).
• Hydraulic Adjustable slow down available on request.
• Manual release with Key for power failure.
• Hydraulic lock in closing and opening up to 6 feet (other locks, configurations and models with different pumps are available).
• External manual release with box (optional).
• Duty Cycles*: 55 per hour.

*Positive Stops Recommended.  230VAC available - Please call for assistance.

Specifications: 

Supply Voltage               115Vac+5% 60Hz

Motor Current                  2 A

Duty cycles                     100%

Operating temperature   -43°F + 131°F 

Supply Voltage               115Vac+5% 60Hz

Motor Current                  2 A

Duty cycles                     100%

Operating temperature   -43°F + 131°F

 Operator Weight            20LBS

Max leaf length               13FT

 

ACCESSORIES:

Loop Detectors / Photocells / Key Pads /

Card Readers / Transmitters & Receivers

/ Telephone Entry Systems / Intercom

Systems

 

SEA Positive Stop PS270 for Half Tank Actuator Arm (order one per arm) 12715105 SEA Positive Stop PS270 for Half Tank Actuator Arm (order one per arm) 12715105
SEA Positive Stop for Half Tank Actuator Arm is required to stop the hydraulic arm precisely where needed. This is a required product unless you have physical stops on the gate itself. (order one per arm) ...
$159.00
SEA Gate 1 DG 110V circuit for replacement only 2300A110G1DGR SEA Gate 1 DG 110V circuit for replacement only 2300A110G1DGR
SEA Gate 1 DG Controller Circuit Board for SEA Swing Gate Operators. ...
$450.00
SEA Gate  2 DG 220V circuit board for replacement only 2302A220G2DGR SEA Gate 2 DG 220V circuit board for replacement only 2302A220G2DGR
SEA Gate 2DG Controller Circuit Board / Replacement board only. ...
$497.00
Linear AK-11 Exterior Digital Keypad  ACP00748 Linear AK-11 Exterior Digital Keypad ACP00748
The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast ...
$237.00
EMX CarSense 202 Driveway Alert Sensor Gate Opener with 50 ft Lead-in EMX CarSense 202 Driveway Alert Sensor Gate Opener with 50 ft Lead-in
The CarSense 202 Driveway Alert Sensor is based on the well known CarSense 101 design. It has single piece design, making installation easy. The CarSense 202 is suitable for many applications, including safety, security access control, and solar appl...
$188.49
EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures
The Infrared Photoeye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators. Features Works wit...
$239.00
Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP
Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All dete...
$121.38
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner) Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)
Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot...
$144.84

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: