The BL 41 barrier is a variant of the BL 40. Equipped with a central arm, it can carry booms up to a length of 12 meters.
The Model BL41 Barrier Gate Operator is designed and manufactured by Automatic Systems. The BL41 is typically utilized for medium traffic volumes and wide access point management. It is designed to stand up to the harshest weather environments and operating conditions.
The BL41 is most often utilized for multiple lane protection. Common applications include: Bridge and Tunnel access; commercial/industrial garages and warehouses, etc.
Its main features are :
. Performance and modernity
. Is suitable for industrial environments
. Is suitable for intensive use
. Automatic opening in the event of power failure
. Integrated boom locking mechanism (option)
. Long arm
. Possibility of closing a very wide road with a single barrier, while assimilating major flows of vehicles
The main market segments concerned are :
. Perimeter access (tertiary, industries, hospitals...)
. Traffic management
Single Channel, Dual Relay Outputs
The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
Input Power, 11-Pin Amphenol Connector
3: 120 VAC
4: 12 VDC, 24 VDC or 24 VAC
8: 240 VAC
-S: Fa..
Application: 1/4" wide saw cuts, gated facilities
The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
The Infrared Photoeye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators.
Features
Works without lenses so it is easy to align
Electronic sunlight filter
Automatic compensation for temperature changes
24 degrees of alignment freedom
Capable of penetrating 70% obstruction due to fog, steam and even spray
Immune to vibration
Does ..
Click on the Related Products Tab to Order Required Memory
Standalone Card Reader Surface Mount -programmable card reader system can store up to 1000 card codes. Includes 1000 memory, 16.5 volt, 20 VA plug-in transformer.AWID Reader See Memory upgrade Below
The model 1520 provides users with a full feature single door stand-alone access control system. The 1520 is available with a built-in proximity card reader or can be ordered as a single door controller allowing the user to add their..
Clam Shell Card
Credit Card Size with Beveled Edges
Molded Slot in Portrait Orientation
Off White Color
Features
Read range of 4 to 24 inches (depending on Reader)
Dimensions: 3.375 x 2.125 x 0.075 in
Pre-Punched in Portrait Orientation
Off White Color
Customizable with your logo on the front
Maintenance free operation, No batteries needed
Up to 72 trillion or 72,057,594,037,927,936 unique codes
Benefit..
The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics.
Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The rela..
File Name
Size
Link
Automatic Systems BL41 Cutsheet
0.21Mb
download
Ramset Jet Operator Install Manual
1.92Mb
download
Magnetic MPS Motorized Swing Gates
2.03Mb
download