AWID DC-1023 Dual (HF) Reader

AWID DC-1023 Dual (HF) Reader

AWID DC-1023 Dual (HF) Reader

AWID’s DC-1023 Dual-Frequency Reader is a combination of two reader technologies in a single small switchplate-type enclosure.  It is ready for installation on a wall or on a single-gang box.  The DC-1023 reader provides superior read range, along with high-quality, reliability, durability, attractive appearance, and easy installation.

ProtocolsThe DC-1023 reader contains two ready-to-use readers in a single enclosure.  The low-frequency (LF) reader is for AWID’s standard proximity (125 kHz) cards and tags.  The high-frequency (HF) reader is for 13.56 MHz “smart card” protocols, available from commercial suppliers worldwide.  The DC-1023 reader needs no programming during installation.  AWID ships the reader with pre-programmed firmware for one or more HF protocols as ordered by the customer.


  • HF protocols
    • ISO-14443A (Mifare, DESfire*, Mifare Plus*) -- UID or Sector Data
    • ISO-14443B – UID or Sector Data
    • ISO-15693 (Smart Label) – UID
    • ISO-18000-3
    • A.S.K.*
    • U.S. Government PIV – Reader is FIPS 201 transparent (future release)
  • Dimensions: 4.9 x 3.1 x 0.9 inches
  • Operating Temperature: -31 °F to +150 °F (-35 °C to +65 °C)


  • Uniform code formats
  • Self testing and self-diagnostic ...
  • simple wiring to controller
  • Dual applications
  • No additional HF programming needed
  • Auto initializes after self-diagnostic


Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: