AWID DK-1025 Dual-Frequency (HF) Reader-Keypad

AWID DK-1025 Dual-Frequency (HF) Reader-Keypad
Qty:

AWID DK-1025 Dual-Frequency (HF) Reader-Keypad

AWID’s DK-1025 Dual-Frequency Reader-Keypad is a switchplate-type reader for two technologies, combined with a 12-key numeric keypad, in a unit that fits on a single-gang box.  The DK-1025 reader provides superior read range for proximity and smart cards.  The keypad may be used for PIN, programming, enrolling, and data entry.

Protocols The DK-1025 reader contains 2 readers and a keypad in a single enclosure.  The low-frequency reader is for AWID’s standard proximity (125 kHz) cards and tags.  The high-frequency reader is for 13.56 MHz “smart card” protocols, available from suppliers worldwide.  The keypad transmits 1 of 3 standard codes formats.  The DK-1025 reader needs no programming during installation.  AWID ships the reader with pre-programmed firmware for HF protocols and keypad code, ordered by the customer.

 

Features

  • HF protocols
    • ISO-14443A (Mifare, DESfire*, Mifare Plus*) -- UID or Sector Data
    • ISO-14443B – UID or Sector Data
    • ISO-15693 (Smart Label) – UID
    • ISO-18000-3
    • A.S.K.*
    • U.S. Government PIV – Reader is FIPS 201 transparent (future release)
  • Dimensions: 4.9 x 3.1 x 1.0 inches
  • Operating Temperature: -31 °F to +150 °F (-35 °C to +65 °C)

Benefits

  • Triple applications, Proximity, Smart Card & Keypad
  • Uniform code formats
  • Self testing and self-diagnostic ...
  • simple wiring to controller
  • Dual applications
  • No additional HF programming needed
  • Auto initializes after self-diagnostic

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: