BFT LUX GV2B UL/CSA Hydraulic Single Swing Gate Kit 110VAC for Gates to 700lbs/ 15ft with (1) Arm and Rigal 4 Control Panel

BFT LUX GV2B UL/CSA Hydraulic Single Swing Gate Kit 110VAC for Gates to 700lbs/ 15ft with (1) Arm and Rigal 4 Control Panel

Call for price

ACCESSORIES & RELATED MODELS

BFT LUX GV2B UL/CSA 110VAC Hydraulic Swing Gate Arm Only for Slave or Replacement

BFT LUX GV2B UL/CSA 110VAC Hydraulic Swing Gate Arm Only for Slave or Replacement

Several versions available: with slowdown, internal positive stops, longer stroke. All of them are irreversible. SAFE USE Crushing prevention guaranteed by two adjustable bypass valves. These 120 volt hydraulic linear arms will give full satisfaction and will smoothly operate any gate up to 700 pounds per leaf. Features: • Opening angles of 120 degrees • Irreversible (cannot be opened manually when motor is engaged) • Easy manual release in case of power failure • Open..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch Input Power, 11-Pin Amphenol Connector 3: 120 VAC 4: 12 VDC, 24 VDC or 24 VAC 8: 240 VAC -S: Fa..

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

The Infrared Photoeye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators. Features Works without lenses so it is easy to align Electronic sunlight filter Automatic compensation for temperature changes 24 degrees of alignment freedom Capable of penetrating 70% obstruction due to fog, steam and even spray Immune to vibration Does ..

EMX CarSense 202 Driveway Alert Sensor Gate Opener with 50 ft Lead-in

EMX CarSense 202 Driveway Alert Sensor Gate Opener with 50 ft Lead-in

The CarSense 202 Driveway Alert Sensor is based on the well known CarSense 101 design. It has single piece design, making installation easy. The CarSense 202 is suitable for many applications, including safety, security access control, and solar applications. *The Carsense 202 is Available with extended leads 100ft, 200ft Please call 775-588-1475 x 152       Benefits include: Sensing probe is buried to protect against vandalism Wide range of power supply..

Doorking 1812 Classic Telephone Entry System- Surface Mount, Stainless Steel 1812-081

Doorking 1812 Classic Telephone Entry System- Surface Mount, Stainless Steel 1812-081

Click on the "Related Products" Tab Above for all 1812 Models The model 1812 is a unique telephone intercom system that allows homeowners to use their telephone as an intercom to speak to a guest at a front door or gate without the necessity to pay for an additional telephone line at their home. With its "intercom mode" programming feature, the 1812 can also be connected to a PBX or KSU type system, making it ideal for small businesses to control access through a single door..

Linear AK-11 Exterior Digital Keypad  ACP00748

Linear AK-11 Exterior Digital Keypad ACP00748

The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The rela..

Several versions available: with slowdown, internal positive stops, longer stroke. All of them are irreversible. SAFE USE Crushing prevention guaranteed by two adjustable bypass valves. These 120 volt hydraulic linear arms will give full satisfaction and will smoothly operate any gate up to 700 pounds per leaf.

Features:
• Opening angles of 120 degrees
• Irreversible (cannot be opened manually when motor is engaged)
• Easy manual release in case of power failure
• Opening and closing: 17 seconds (30 seconds on larger model)
• Adjustable working time from LCD panel control board
• Rated up to 500 opening and closing cycles per day
• Six different models to ensure that all application and installation
scenarios are met
• Optional internal positive stops available on some operators: no need
for external stops on the driveway
• Optional thermostatically controlled heater available to ensure smooth
operation in colder climates
• Install a complete pre-wired electrical enclosure box to further improve
aesthetics and add many optional entry and safety systems all in one
confined lockable enclosure box
Hydraulic gate openers are stronger and more reliable than
electromechanical gate openers, and are therefore trusted more. They
offer many advantages that make them superior and preferable over
electromechanical gate openers.
The main shaft of the gate operator is filled with hydraulic fluid, and there
is a stopper in the center which separates the fluid into 2 chambers within
the shaft. The stopper is connected to the part of the operator that moves
in and out, opening and closing the gate. The motor is next to a pump with
2 tubes - one reaching into one chamber of fluid and another reaching
into the other chamber of fluid. When activated, the pumps take water out
of one chamber and pump it into the other chamber, which forces the
stopper and likewise the gate operator to move in and out depending on
whether the gate is opening or closing. Because of this simple design,
hydraulic gate operators are much more reliable than electromechanical
gate operators.

Gate opener can operate in extreme temperatures. From 14 degrees Fahrenheit to 140 degrees Fahrenheit (-10 C to + 60 C). Strong, compact hydraulic piston, available in various versions depending on specific needs and field of use. There are models featuring hydraulic locking and non-locking (reversible) models that need a solenoid lock to keep them in position. Operating force is adjusted with extreme precision by means of the
control unit’s electronic control. Operation at the end of travel is adjusted electronically in the control panel.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
BFT LUX GV2B UL/CSA 110VAC Hydraulic Swing Gate Arm Only for Slave or Replacement

BFT LUX GV2B UL/CSA 110VAC Hydraulic Swing Gate Arm Only for Slave or Replacement

Several versions available: with slowdown, internal positive stops, longer stroke. All of them are irreversible. SAFE USE Crushing prevention guaranteed by two adjustable bypass valves. These 120 volt hydraulic linear arms will give full satisfaction and will smoothly operate any gate up to 700 pounds per leaf. Features: • Opening angles of 120 degrees • Irreversible (cannot be opened manually when motor is engaged) • Easy manual release in case of power failure • Open..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch Input Power, 11-Pin Amphenol Connector 3: 120 VAC 4: 12 VDC, 24 VDC or 24 VAC 8: 240 VAC -S: Fa..

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

The Infrared Photoeye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators. Features Works without lenses so it is easy to align Electronic sunlight filter Automatic compensation for temperature changes 24 degrees of alignment freedom Capable of penetrating 70% obstruction due to fog, steam and even spray Immune to vibration Does ..

EMX CarSense 202 Driveway Alert Sensor Gate Opener with 50 ft Lead-in

EMX CarSense 202 Driveway Alert Sensor Gate Opener with 50 ft Lead-in

The CarSense 202 Driveway Alert Sensor is based on the well known CarSense 101 design. It has single piece design, making installation easy. The CarSense 202 is suitable for many applications, including safety, security access control, and solar applications. *The Carsense 202 is Available with extended leads 100ft, 200ft Please call 775-588-1475 x 152       Benefits include: Sensing probe is buried to protect against vandalism Wide range of power supply..

Doorking 1812 Classic Telephone Entry System- Surface Mount, Stainless Steel 1812-081

Doorking 1812 Classic Telephone Entry System- Surface Mount, Stainless Steel 1812-081

Click on the "Related Products" Tab Above for all 1812 Models The model 1812 is a unique telephone intercom system that allows homeowners to use their telephone as an intercom to speak to a guest at a front door or gate without the necessity to pay for an additional telephone line at their home. With its "intercom mode" programming feature, the 1812 can also be connected to a PBX or KSU type system, making it ideal for small businesses to control access through a single door..

Linear AK-11 Exterior Digital Keypad  ACP00748

Linear AK-11 Exterior Digital Keypad ACP00748

The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The rela..

File Name Size Link
BFT Lux Manual 0.34Mb download
BFT LUX Cutsheet 0.34Mb download
Ramset Jet Operator Install Manual 1.92Mb download
Magnetic MPS Motorized Swing Gates 2.03Mb download