Automatic Systems BL 229 Toll Barrier Gate Ultra Fast Rising Barrier with 10 ft Arm

Automatic Systems BL 229 Toll Barrier Gate Ultra Fast Rising Barrier with 10 ft Arm

Call for price

ACCESSORIES & RELATED MODELS

Reno AX2DL-1C (Directional Logic) Dual Channel, 1 Connector Loop Detector

Reno AX2DL-1C (Directional Logic) Dual Channel, 1 Connector Loop Detector

Two Channel Vehicle Detection with Directional Logic The Model AX2DL-1C is a full featured, dual channel, dual output (one per channel) vehicle detector with directional logic. All detector functions and settings are easy to configure by using two sets of six external DIP switches.  ..
Questions and estimates
Reno AVI-BP Receiver Vehicle ID Detector

Reno AVI-BP Receiver Vehicle ID Detector

Application: Automatic Vehicle Identification Receiver, Shelf Mount, Single Code (Presence, Pulse, Sensitivity) Identifies vehicles equipped with a uniquely coded AVI transmitter and provides two relay outputs; presence and pulse. The presence relay will activate as long as the AVI transmitters is in range. The pulse relay provides a single 1/4 second pulse when a valid code is received.  The two LEDs on the front panel indicates  the presence of power (green LED) and a valid-c..
Questions and estimates
EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

The Infrared Photoeye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators. Features Works without lenses so it is easy to align Electronic sunlight filter Automatic compensation for temperature changes 24 degrees of alignment freedom Capable of penetrating 70% obstruction due to fog, steam and even spray Immune to vibration Does ..
Questions and estimates
Reno PLB-20-50-RA Preformed Loop (4' X 6' X 50 ft lead-in from corner)

Reno PLB-20-50-RA Preformed Loop (4' X 6' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
Questions and estimates
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
Questions and estimates
Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch Input Power, 11-Pin Amphenol Connector 3: 120 VAC 4: 12 VDC, 24 VDC or 24 VAC 8: 240 VAC -S: Fa..
Questions and estimates

The Model BL-229 Barrier Gate Operator is designed and manufactured by Automatic Systems. The BL-229 is typically utilized for medium to high traffic volumes and for wide lane management too. It is designed to stand up to the harshest weather environments and operating conditions. The BL-229 operator is a heavy-duty high performance barrier gate with fast operational speed, specially designed for large capacity industrial facilities.

The BL-229 is a real “work horse”. It offers cost effective control of vehicle access for 10ft to 20 ft lanes. The versatile BL-229 is extremely dependable and reliable, at the same time providing advanced safety features for both vehicles and pedestrians. The BL-229 is capable of utilizing up to (20ft) barrier arms, and can fully open in one to four seconds depending upon arm


The BL 229 Highway barrier is the fast version of the BL229, dedicated to highway toll applications.
As an answer to customer demand, Automatic Systems integrated various safety/security options to the barrier: boom swing-off device, Protecta ® (carbon fiber), boom with automatic reseating..bl229

Its main features are :

. Modularity

. Barrier equipped with control logic allowing operation perfectly adapted to every situation
. Various options available, according to the installation and the policies of the owner

. Performance

. Fast, programmable and quiet movements
. Assimilation of major flows of vehicles
. Passage opened and closed again very quickly

The main market segments concerned are :

. Toll roads, highways
. High traffic industrial sites (shift changes)

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Reno AX2DL-1C (Directional Logic) Dual Channel, 1 Connector Loop Detector

Reno AX2DL-1C (Directional Logic) Dual Channel, 1 Connector Loop Detector

Two Channel Vehicle Detection with Directional Logic The Model AX2DL-1C is a full featured, dual channel, dual output (one per channel) vehicle detector with directional logic. All detector functions and settings are easy to configure by using two sets of six external DIP switches.  ..
Questions and estimates
Reno AVI-BP Receiver Vehicle ID Detector

Reno AVI-BP Receiver Vehicle ID Detector

Application: Automatic Vehicle Identification Receiver, Shelf Mount, Single Code (Presence, Pulse, Sensitivity) Identifies vehicles equipped with a uniquely coded AVI transmitter and provides two relay outputs; presence and pulse. The presence relay will activate as long as the AVI transmitters is in range. The pulse relay provides a single 1/4 second pulse when a valid code is received.  The two LEDs on the front panel indicates  the presence of power (green LED) and a valid-c..
Questions and estimates
EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

The Infrared Photoeye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators. Features Works without lenses so it is easy to align Electronic sunlight filter Automatic compensation for temperature changes 24 degrees of alignment freedom Capable of penetrating 70% obstruction due to fog, steam and even spray Immune to vibration Does ..
Questions and estimates
Reno PLB-20-50-RA Preformed Loop (4' X 6' X 50 ft lead-in from corner)

Reno PLB-20-50-RA Preformed Loop (4' X 6' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
Questions and estimates
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
Questions and estimates
Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch Input Power, 11-Pin Amphenol Connector 3: 120 VAC 4: 12 VDC, 24 VDC or 24 VAC 8: 240 VAC -S: Fa..
Questions and estimates
File Name Size Link
Automatic Systems BL229 Cutsheet 0.22Mb download