Automatic Systems BLG 76 Fenced Barrier Gate Rising Fenced Barrier with Fenced Arm 17'L X 6'H

Automatic Systems BLG 76 Fenced Barrier Gate Rising Fenced Barrier with Fenced Arm 17'L X 6'H

Call for price

ACCESSORIES & RELATED MODELS

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch Input Power, 11-Pin Amphenol Connector 3: 120 VAC 4: 12 VDC, 24 VDC or 24 VAC 8: 240 VAC -S: Fa..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

The Infrared Photoeye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators. Features Works without lenses so it is easy to align Electronic sunlight filter Automatic compensation for temperature changes 24 degrees of alignment freedom Capable of penetrating 70% obstruction due to fog, steam and even spray Immune to vibration Does ..

Doorking 1520 Standalone Card Reader (AWID Cards) 1520-080

Doorking 1520 Standalone Card Reader (AWID Cards) 1520-080

Click on the Related Products Tab to Order Required Memory Standalone Card Reader Surface Mount -programmable card reader system can store up to 1000 card codes. Includes 1000 memory, 16.5 volt, 20 VA plug-in transformer.AWID Reader See Memory upgrade Below The model 1520 provides users with a full feature single door stand-alone access control system. The 1520 is available with a built-in proximity card reader or can be ordered as a single door controller allowing the user to add their..

AWID CS Clam Shell Card for (LF) Readers

AWID CS Clam Shell Card for (LF) Readers

Clam Shell Card Credit Card Size with Beveled Edges Molded Slot in Portrait Orientation Off White Color Features Read range of 4 to 24 inches (depending on Reader) Dimensions: 3.375 x 2.125 x 0.075 in Pre-Punched in Portrait Orientation Off White Color Customizable with your logo on the front Maintenance free operation, No batteries needed Up to 72 trillion or 72,057,594,037,927,936 unique codes Benefit..

Linear AK-11 Exterior Digital Keypad  ACP00748

Linear AK-11 Exterior Digital Keypad ACP00748

The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The rela..

The BLG 76 rising barrier with fence is built on the robust architecture of the BL 52, and is equipped with a boom carrying a mesh fence.

It is an interesting alternative to a sliding gate, because in addition to closing an access hermetically, it makes it possible to control it, vehicle by vehicle, and in a more fluid way.

Frequency of use :moderate or intensive use
Width of passage :Up to 26 ft (5,5 m)
Height of the mesh from the ground :approximately 6 ft (1,9m)
Opening / closing time :5 to 8 sec (varies with options)

Special features : raising barrier equipped with a mesh fence

 

Its main features are :blg76 fence barrier

. Reinforced security
. Closing access to pedestrians as well, even on a very wide road
. Robustness and dissuasion of the unit
. Strict and effective entry control

Assimilation of a major flow of vehicles

. System faster than a sliding gate

Compactness on the ground
. Small overall dimensions in comparison with a sliding gate

The main market segments concerned are :

. Perimeter access (commercial, industries, ports...)

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch Input Power, 11-Pin Amphenol Connector 3: 120 VAC 4: 12 VDC, 24 VDC or 24 VAC 8: 240 VAC -S: Fa..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

The Infrared Photoeye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators. Features Works without lenses so it is easy to align Electronic sunlight filter Automatic compensation for temperature changes 24 degrees of alignment freedom Capable of penetrating 70% obstruction due to fog, steam and even spray Immune to vibration Does ..

Doorking 1520 Standalone Card Reader (AWID Cards) 1520-080

Doorking 1520 Standalone Card Reader (AWID Cards) 1520-080

Click on the Related Products Tab to Order Required Memory Standalone Card Reader Surface Mount -programmable card reader system can store up to 1000 card codes. Includes 1000 memory, 16.5 volt, 20 VA plug-in transformer.AWID Reader See Memory upgrade Below The model 1520 provides users with a full feature single door stand-alone access control system. The 1520 is available with a built-in proximity card reader or can be ordered as a single door controller allowing the user to add their..

AWID CS Clam Shell Card for (LF) Readers

AWID CS Clam Shell Card for (LF) Readers

Clam Shell Card Credit Card Size with Beveled Edges Molded Slot in Portrait Orientation Off White Color Features Read range of 4 to 24 inches (depending on Reader) Dimensions: 3.375 x 2.125 x 0.075 in Pre-Punched in Portrait Orientation Off White Color Customizable with your logo on the front Maintenance free operation, No batteries needed Up to 72 trillion or 72,057,594,037,927,936 unique codes Benefit..

Linear AK-11 Exterior Digital Keypad  ACP00748

Linear AK-11 Exterior Digital Keypad ACP00748

The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The rela..

File Name Size Link
Automatic Systems BLG76 Cutsheet 0.10Mb download