Byan G2M Replacement Circuit Board Only 120VAC for 500, 600, 900, 1100 Arms

Byan G2M Replacement Circuit Board Only 120VAC for 500, 600, 900, 1100 Arms

Call for price

ACCESSORIES & RELATED MODELS

Byan G104 900 Hydraulic 120VAC Swing Gate Operator Arm - Primary/ Slave Compatible

Byan G104 900 Hydraulic 120VAC Swing Gate Operator Arm - Primary/ Slave Compatible

Please Note: Order the G2M Control Panel for new installations along with hydraulic arm(s). The 800/900 Series comes in three different styles and 2 different voltages. Hydraulic locks in both the open and closed positions. For gates greater than 12 feet in length, electric locks are recommended. In some states and cities (in case of a power outage), the gate must be able to be pushed open by the fire ore emergency vehicle. We can take out the hydraulic check valve in the closed position. You m..

Byan G102 600 Hydraulic 120VAC Swing Gate Operator Arm - Primary/ Slave Compatible

Byan G102 600 Hydraulic 120VAC Swing Gate Operator Arm - Primary/ Slave Compatible

Please Note: Order the G2M Control Panel for new installations along with hydraulic arm(s). The 600 Series is a residential and medium-duty commercial operator for applications that require 100 cycles per hour or less. It is ideal for uses that do not require continuous duty. The 600 Series is unique in that it does not require positive stops. On all hydraulic operators, the gates must make contact with an obstruction that causes them to stop, both when closing and opening. The 600 Series tr..

Byan 500 Hydraulic 120VAC Swing Gate Operator Arm - Primary/ Slave Compatible

Byan 500 Hydraulic 120VAC Swing Gate Operator Arm - Primary/ Slave Compatible

Please Note: Order the G2M Control Panel for new installations along with hydraulic arm(s). The 500 Series is a residential swing gate operator. As a light-duty operator, it should be subject to no more than 60 cycles per hour. This operator is recommended for gates 12 feet long or shorter that weight less than 1,500 lbs. Opening speed is approximately 12 seconds. It slows down the last 5 to 10 degrees of the swing. Hydraulic locks in both the open and closed positions. For gates 12 feet in ..

Byan G2M Microprocessor Circuit Board 120VAC  for 500, 600, 800 & 900 Series ArmsThe control board is available in 115vac & 220vac

This microprocessor can function with just about all accessories that are currently on the market.

Buttons:
Reverse: On first activation, this button makes the gate open. Subsequent use will reverse the movement of the operator. While the gate is completely open, activation will make the gate close.
Open: Used only to open the gate.
Close: Used only to close the gate.
Stop: Stops the opening/closing of the gate.

Adjustable Timers:
Red: Opening timer that controls the opening time.
Yellow: Automatic closing timer. When the gate is opened, the timer is activated. After a programmed time, the gate will automatically close.
Blue: Closing timer that controls the closing time.
The panel contains a built-in timer of 2 seconds to stop the operator when a reversing activation occurs.

byan control board

Color Description Min. Sec. Max. Sec.
White Delay Electronic Lock Opening 0 2
Red Opening Time 4 44
Yellow Automatic Closing 5 90
Blue Closing Time 4 44

Open/Close Limit Switches: These switches stop the opening/closing. Remove two jumper wires if used.

Safety Contact: To branch a photocell or sense output from a loop detector or reversing edge. The result is a reverse of movement during closing time. Not active when opening.

Electric Lock Output: 24 volt pulsed output (12 volt if required). Two selectable times: Short Pulse (1 sec.) or Long Pulse (8 sec.).

External Light Timer, Contact Output: This output provides a N.O. pulse contact to start the activation of a light timer when opening.

Optional Plug-In Cards: RTC (Remote and Decoder Control Card) or DTC (Decoder Control Card). These cards allow for connecting digital keyboards and magnetic key readers to the panel. RTC is also a receiver card.

Flashing Light Card: Provides a flashing contact before and during opening/closing.

Traffic Light Card: Controls a red/green traffic light.

Alarm Output Card: Provides an alarm contact (N.C. and N.O.) when the gate is manually opened during standby position or when a second car tries to pass after an allowed user (if option 7 is selected).

Thermal Contact: Many motors provide an N.C. contact output when motor temperature increases to a predetermined setting. This activation stops all functions when the motor hits that high-temperature setting.

Power Output: You can connect motors until you reach a total valve of 1/2 HP.

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Byan G104 900 Hydraulic 120VAC Swing Gate Operator Arm - Primary/ Slave Compatible

Byan G104 900 Hydraulic 120VAC Swing Gate Operator Arm - Primary/ Slave Compatible

Please Note: Order the G2M Control Panel for new installations along with hydraulic arm(s). The 800/900 Series comes in three different styles and 2 different voltages. Hydraulic locks in both the open and closed positions. For gates greater than 12 feet in length, electric locks are recommended. In some states and cities (in case of a power outage), the gate must be able to be pushed open by the fire ore emergency vehicle. We can take out the hydraulic check valve in the closed position. You m..

Byan G102 600 Hydraulic 120VAC Swing Gate Operator Arm - Primary/ Slave Compatible

Byan G102 600 Hydraulic 120VAC Swing Gate Operator Arm - Primary/ Slave Compatible

Please Note: Order the G2M Control Panel for new installations along with hydraulic arm(s). The 600 Series is a residential and medium-duty commercial operator for applications that require 100 cycles per hour or less. It is ideal for uses that do not require continuous duty. The 600 Series is unique in that it does not require positive stops. On all hydraulic operators, the gates must make contact with an obstruction that causes them to stop, both when closing and opening. The 600 Series tr..

Byan 500 Hydraulic 120VAC Swing Gate Operator Arm - Primary/ Slave Compatible

Byan 500 Hydraulic 120VAC Swing Gate Operator Arm - Primary/ Slave Compatible

Please Note: Order the G2M Control Panel for new installations along with hydraulic arm(s). The 500 Series is a residential swing gate operator. As a light-duty operator, it should be subject to no more than 60 cycles per hour. This operator is recommended for gates 12 feet long or shorter that weight less than 1,500 lbs. Opening speed is approximately 12 seconds. It slows down the last 5 to 10 degrees of the swing. Hydraulic locks in both the open and closed positions. For gates 12 feet in ..

File Name Size Link
Byan G2M Cutsheet 1.86Mb download