Doorking Swing Gate Operator Actuator Arm 6003-080

Doorking Swing Gate Operator Actuator Arm 6003-080

ACCESSORIES & RELATED MODELS
SELECT PRODUCT TO ADD TO CART WITH YOUR PURCHASE


Total accessories: $0.0
Total product with accessories: $0.00
Qty:

Doorking Swing Gate Operator Actuator Arm 6003-080

Click on the "Related Products" Tab Above for More Models

DKS 6003 Actuator
The DKS residential swing gate actuator offers convenience and reliability in a compact design. The actuator mounts directly on your gate and pilaster, simplifying installation and eliminating the need for concrete pads. This compact actuator uses extruded aluminum material to provide a clean profile that will blend in with any gate design. But beauty is not just skin deep with the DKS actuator. The powerful screw driven piston connects directly to the gate eliminating weak mechanical connections and it is fully enclosed to prevent dirt and other airborne corrosives from contaminating the screw threads. 
The 6003 actuator operates on 24 Volt DC power and features built in limit switches that precisely control the start / stop speed, and travel of your gate. The microprocessor based electronic control board provides many advanced features typically not found in operators in this class. The control box can be powered by 120 Volt AC, which is then converted to 24 Volt DC to power the actuator and control board. Two 120 Volt control boxes are available to choose from, Deluxe and Standard. The Deluxe control box includes three 120 VAC outlets to power accessory transformers. Both include 3.5 Ah (Amp Hour) batteries for back-up power operation. You can also select our Solar Powered control box, which eliminates the need for high voltage power runs. Click the link for more information on the Solar Power option and a 30% tax credit.
The DKS 6002, 6003, 6004 and 6400 swing gate operators can be Solar Powered by using any of our Solar Control Box options. Our new 0.0 Amp SBPD (Pat Pend) circuit* insures that battery power is used only when the gate operator is activated. This means there is no use of battery power until the operator is engaged, which provides you with more gate operator cycles per battery charge. This is ideal for remote locations where no power is available. DKS offers three solar power control box options allowing the system to be designed for your application requirements.

 

Features
  • Internal adjustable limit switches.
  • Slow start / slow stop.
  • Overlap feature for dual swing gate operation.
  • Magnetic lock output.
  • Ports for plug-in loop detectors.
  • Fully enclosed screw drive.
  • 24 VDC operating power.
  • Built-in battery back-up.
  • Separate control panel.
  • Keyed release for manual operation.
Specifications
  • Maximum gate width 10-feet. (Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator. )
  • Swings gate 90 degrees in approximately 16-seconds.
  • Actuator operates at 24 Volts DC power.
  • Class I applications.
  • Compliant with UL 325 and 991. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • *Dimensions (actuator only): 5"W x 5"H x 35 "L. These dimensions are at the widest part of the actuator. It tapers down to approximetaly 2-1/2" x 3".
  • Dimensions (120 Volt deluxe control box): 14.5"W x 24"H x 4.25"D
  • Dimensions (120 Volt standard control box): 12.5"W x 16.5"H x 4.25"D
  • Dimensions (24 Volt Solar control box): 13"W x 21"H x 8"D
Options
Bi-parting gate connection cable.
Magnetic gate lock.
Plug-in loop detectors.
Solar power.

 

Doorking 4302 Standard Control Box 120VAC. Includes two batteries.  4302-111 Doorking 4302 Standard Control Box 120VAC. Includes two batteries. 4302-111
Click on the "Related Products" Tab Above for More Models The DKS 6002, 6003, 6004 and 6400 swing gate operators can be Solar Powered by using any of our Solar Control Box options. Our new 0.0 Amp SBPD (Pat Pend) circuit* insures that ba...
Call for price!
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner) Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)
Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot...
$144.84
Doorking 9409 Plug-in 2 channel Loop Detector 9409-010 Doorking 9409 Plug-in 2 channel Loop Detector 9409-010
Click on the "Related Products" Tab Above for More Models Loop detectors and loops are strongly recommended on all automated vehicular gate applications to help prevent gates from closing on vehicles in the path of the gate. DKS Singl...
Call for price!

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: