Doorking 24DC/115V Solar Kit Swing Gate Operator 6004-080

Doorking  24DC/115V Solar Kit Swing Gate Operator   6004-080
Qty:

Doorking 24DC/115V Solar Kit Swing Gate Operator 6004-080

Click on the "Related Products" Tab Above for More Models

 Doorking 6004-080 24Vdc Single Swing Full Kit/Solar Application

The DKS residential column mount swing gate operator offers convenience and reliability in a compact design. The Model 6004 is ideal to operate swing gates that are mounted on large columns. The 6004 mounts directly on the column and simplifies installation by eliminating the need to cut niches on the column and there is no need for concrete pads. Using a strong gear reduction system, there is no need to worry about hydraulic leaks, check valves or pumps. The 6004 features a keyed release system that allows the gate to be moved by hand if a system failure should occur.
 
The 6004 Column Mount operates on 24 Volt DC power and features built in limit switches that precisely control the start / stop speed, and travel of your gate. The microprocessor based electronic control board provides many advanced features typically not found in operators in this class. The control box can be powered by 120 Volt AC, which is then converted to 24 Volt DC to power the actuator and control board. Two 120 Volt control boxes are available to choose from, Deluxe and Standard. The Deluxe control box includes three 120 VAC outlets to power accessory transformers. Both include 3.5 Ah (Amp Hour) batteries for back-up power operation. You can also select our Solar Powered control box, which eliminates the need for high voltage power runs.

Package Includes:

6004‐080 (24 VDC) Column Mount Gate Actuator

4302‐114 Solar Control Box (w/two 18 Ah batteries)

 24 Volt, 10 Watt Solar Panel

 Solar Panel Mount Bracket

Features: 

  • Fully enclosed drive mechanism
  • Adjustable built in limit switches precisely control the start / stop speed, and travel of gate for smooth operation
  • 24 VDC operating power
  • Batteries included
  • Built-in battery charger
  • Ports for Exit and Reverse plug-in loop detectors
  • 90° in approximately 12 seconds
  • Gate overlap feature for dual gate operation
  • Magnetic lock power circuit
  • Built-in reset and test buttons
  • Maximum run timer
  • Built-in high current warning

Specifications: 

Maximum gate width 8-feet. (Assumes gate swings level and is in good condition with properly adjusted hardware.   Other external factors may affect the performance of the gate operator. )

Maximum gate weight 300 lbs.

Operates at 24 Volts DC power.

Class I applications.

Compliant with UL 325 and 991.  (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices need to be installed with this gate operator.   Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)

*Dimensions (operator only): 5.13"W x 5.25"H x 16"L. 

Actuator main arm: 17.5" in length, with a total Height of 6.5" including the arm drive bolt.

Dimensions (120 Volt deluxe control box): 14.5"W x 24"H x 4.25"D

Dimensions (120 Volt standard control box): 12.5"W x 16.5"H x 4.25"D

Dimensions (Solar control box): 13"W x 21"H x 8"D

Options: 

Bi-parting gate connection cable.

Magnetic gate lock.

Plug-in loop detectors.

Solar power.

 

 

 

 

 

 

Doorking 1200 Three Button Gate Exterior/Interior Controller 1200-017 Doorking 1200 Three Button Gate Exterior/Interior Controller 1200-017
Gate operator control stations provide complete manual control for DKS vehicular gate operators. The unique logic inputs found on DKS gate operators require only 3 wires for connection to a 3‐button control station. Manual control devices for D...
Call for price!
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner) Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)
Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot...
$144.84
Doorking 2000 Solar Panel Mount Bracket 2000‐110 Doorking 2000 Solar Panel Mount Bracket 2000‐110
Doorking 2000-110 Solar panel bracket for 20w and 10w panels ...
$65.00
Doorking 1503 Simple Basic Keypad Surface Mount Standalone (Non Lighted). 1503-080 Doorking 1503 Simple Basic Keypad Surface Mount Standalone (Non Lighted). 1503-080
The DKS 1500 series family of keypads provides access control for virtually any application where digital code entry is desired and they are available for stand-alone applications or for connection to an access controller. These vandal resistant ke...
Call for price!
Doorking 9410 Plug-in 1 channel Loop Detector (Doorking Operators Only) 9410-010 Doorking 9410 Plug-in 1 channel Loop Detector (Doorking Operators Only) 9410-010
Click on the "Related Products" Tab Above for More Models Loop detectors and loops are strongly recommended on all automated vehicular gate applications to help prevent gates from closing on vehicles in the path of the gate. DKS Singl...
Call for price!
Doorking 4302 Deluxe Control Box 120VAC includes two batteries.4302-112 Doorking 4302 Deluxe Control Box 120VAC includes two batteries.4302-112
Click on the "Related Products" Tab Above for More Models The DKS 6002, 6003, 6004 and 6400 swing gate operators can be Solar Powered by using any of our Solar Control Box options. Our new 0.0 Amp SBPD (Pat Pend) circuit* insures that ba...
Call for price!

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: