Doorking 6050 1/2 hp 115V Swing Gate Operator/Primary 6050-080

Doorking 6050 1/2 hp 115V  Swing Gate Operator/Primary 6050-080
Doorking 6050 1/2 hp 115V  Swing Gate Operator/Primary 6050-080
Qty:

Doorking 6050 1/2 hp 115V Swing Gate Operator/Primary 6050-080

Click on the "Related Products" Tab Above for More Models
The Model 6050 and 6100 operators are designed to operate vehicular swing gates in residential and commercial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. The 6100 can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.
 
*Pad kit or Post Kit required.
Features
  • Self-adjusting, no maintenance magnetic limits.
  • Overlap feature for dual swing gate operation.
  • Designed with a built-in primary and secondary entrapment prevention system.
  • Ports for plug-in loop detectors.
  • Fail-safe release.
  • Tamper detect circuit.
  • DC Powered convenience open (Option on 6100 only).
  • Gate tracker reporting output.
  • Programming switches.
  • Built-in reset switch.
  • Built-in power On/Off switch.
Specifications
Model 6050
  • Maximum gate width 10-feet.
  • Maximum gate weight 400 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator).
  • Swings gate 90 degrees in approximately 10-seconds.
  • 1/2 HP limited-duty motor.
  • 115 VAC, 4.3 Amps.
  • Class I applications.
  • Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions (operator only): 13.5"W x 11"H* x 23"D (* Height of operator only. Actual height above ground is determined by which mounting method is used)

Model 6100

Maximum gate width 14-feet.

  • Maximum gate weight 500 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
  • Swings gate 90 degrees in approximately 10-seconds.
  • 1/2 HP continuous-duty motor.
  • 115 VAC, 5.4 Amps.
  • Class I and Class II applications.
  • Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions (operator only): 13.5"W x 11"H* x 23"D (**27.75"D with convenience open option) (* Height of operator only. Actual height above ground is determined by which mounting method is used)
Options
Bi-parting gate connection cable (6050 secondary operator is shipped with 30-feet of cable; 6100 secondary operator is shipped with 40-feet of cable.)
Post or pad mount - specify which.
DC powered convenience open (6100 only).
Plug-in loop detectors.
Heater kit for cold environments.
Surge suppressors.


 

 

 

 

Doorking Magnetic Gate Lock  DKGLS-S-6-1  600LB Doorking Magnetic Gate Lock DKGLS-S-6-1 600LB
Click on "Related" tab for more products The DKGL (DoorKing Gate Lock) series of magnetic locks are designed for outdoor gate applications.   Magnetic locks have no moving parts to wear out or break and are virtually indestructible....
Call for price!
Doorking 8066-080 MicroCLICK One Button Black Doorking 8066-080 MicroCLICK One Button Black
MicroCLIK RF controls are designed to provide convenience and security. MicroCLIK transmitters are factory coded to 1 of over 1 million available codes. These RF controls are ideal for single family homes, gated communities, apartment complexes, busi...
Call for price!
EMX Blueguard BlueTooth/Cell Phone Remote Controller EMX Blueguard BlueTooth/Cell Phone Remote Controller
Turn Cell Phones into Universal Controls.   Switch almost anything ON/OFF with your iPhone, Android, BlackBerry or Bluetooth enabled cell phone. BlueGuard recognizes your organization's cell phones when they move into range or whe...
$196.73
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner) Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)
Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot...
$144.84
Doorking 9409 Plug-in 2 channel Loop Detector 9409-010 Doorking 9409 Plug-in 2 channel Loop Detector 9409-010
Click on the "Related Products" Tab Above for More Models Loop detectors and loops are strongly recommended on all automated vehicular gate applications to help prevent gates from closing on vehicles in the path of the gate. DKS Singl...
Call for price!
Doorking 2600 Pad Mount, Arms and Hardware Kit For 6050 and 6100 Gate Operators  2600-671 Doorking 2600 Pad Mount, Arms and Hardware Kit For 6050 and 6100 Gate Operators 2600-671
Click on the "Related Products" Tab Above for More Models Doorking 2600-671 Pad Mounting Kit - Required Part Pad mounting kit allows the operator to be mounted directly to a concrete pad. Kit includes mounting base and necessary hardwar...
Call for price!
Doorking 2600  Post Mount, Arms and Hardware Kit For 6050 and 6100 Gate Operators ,2600-674 Doorking 2600 Post Mount, Arms and Hardware Kit For 6050 and 6100 Gate Operators ,2600-674
Click on the "Related Products" Tab Above for More Models Post Mounting Kit - 6050 6100 Post mounting kit allows the operator to be mounted on pipes. Kit includes two 2 inch x 3 foot pipes and necessary hardware. Use this kit with the 6...
Call for price!

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: