Doorking 6300 1hp 115V Swing Gate Operator Primary 6300-084

Doorking 6300 1hp 115V  Swing Gate Operator Primary 6300-084
Qty:

Doorking 6300 1hp 115V Swing Gate Operator Primary 6300-084

Click on the "Related Products" Tab Above for More Models

DKS 6300 1hp  Swing Gate Operator
The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications.   These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications.   You need to specify which mounting method when ordering.   The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate.   This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation. 

These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.
*Pad kit or Post Kit required.
 
Features
  • Maximum gate width 18-feet.
  • Maximum gate weight 700 pounds*.   (*Assumes gate swings level and is in good condition with properly adjusted hardware.   Other external factors may affect the performance of the gate operator.)
  • Swings gate 90 degrees in approximately 15-seconds.
  • 1/2 HP continuous-duty motor.
  • 115, 230*, 460* VAC.   (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
  • Class I, II, III and IV applications.
  • Compliant with UL 325 and 991.   ETL Listed.   (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.   Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions (operator only): 16.25"W x 13.5"H* x 32 "D   (* Height of operator only.   Actual height above ground is determined by which mounting method is used)

Model 6300 with 1 HP Motor

  • Maximum gate width 22-feet.
  • Maximum gate weight 800 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware.   Other external factors may affect the performance of the gate operator.)
  • Swings gate 90 degrees in approximately 15-seconds.
  • 1 HP continuous-duty motor.
  • 115, 230*, 460* VAC.   (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
  • Class I, II, III and IV applications.
  • Compliant with UL 325 and 991.   ETL listed.   (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.   Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions (operator only): 16.25"W x 13.5"H* x 32 "D   (* Height of operator only.   Actual height above ground is determined by which mounting method is used)
  • Self-adjusting, no maintenance magnetic limits.
  • Overlap feature for dual swing gate operation.
  • Designed with a built-in primary and secondary entrapment prevention system.
  • Ports for plug-in loop detectors.
  • Two convenience outlets.
  • Fail-safe release.
  • Tamper detect circuit.
  • DC Powered convenience open (optional).
  • Gate tracker reporting output.
  • Programming switches.
  • Built-in reset switch.
  • Built-in power On/Off switch.
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner) Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)
Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot...
$144.84
Doorking 9409 Plug-in 2 channel Loop Detector 9409-010 Doorking 9409 Plug-in 2 channel Loop Detector 9409-010
Click on the "Related Products" Tab Above for More Models Loop detectors and loops are strongly recommended on all automated vehicular gate applications to help prevent gates from closing on vehicles in the path of the gate. DKS Singl...
Call for price!
Doorking 1812 Classic Telephone Entry System- Surface Mount, Stainless Steel 1812-081 Doorking 1812 Classic Telephone Entry System- Surface Mount, Stainless Steel 1812-081
Click on the "Related Products" Tab Above for all 1812 Models The model 1812 is a unique telephone intercom system that allows homeowners to use their telephone as an intercom to speak to a guest at a front door or gate without the necessi...
Call for price!
Doorking 8066-080 MicroCLICK One Button Black Doorking 8066-080 MicroCLICK One Button Black
MicroCLIK RF controls are designed to provide convenience and security. MicroCLIK transmitters are factory coded to 1 of over 1 million available codes. These RF controls are ideal for single family homes, gated communities, apartment complexes, busi...
Call for price!
Doorking 2600 Post Mount, Arms and Hardware Kit for 6300 Series 2600-263 Doorking 2600 Post Mount, Arms and Hardware Kit for 6300 Series 2600-263
Click on the "Related Products" Tab Above for More Models Post Mounting Kit - 6300 series Post mounting kit allows the operator to be mounted on pipes. Kit includes two 2 inch x 3 foot pipes and necessary hardware. Use this kit with the...
Call for price!
Doorking 2600 Pad Mount, Arms and Hardware Kit for 6300 Gate Operators ,2600-264 Doorking 2600 Pad Mount, Arms and Hardware Kit for 6300 Gate Operators ,2600-264
Click on the "Related Products" Tab Above for More Models Pad Mounting Kit - 6300 series Pad mounting kit allows the operator to be mounted directly to a concrete pad. Kit includes mounting base and necessary hardware. Use this kit with...
Call for price!
Doorking 2600 High Voltage Kit. Required to upgrade Voltage from 115vac 2600-266 Doorking 2600 High Voltage Kit. Required to upgrade Voltage from 115vac 2600-266
Allows the operator to be powered from 208,230,460 or 575 source-voltage. In dual gate applications, only one (1) kit is required (secondary operator DOES NOT require a high voltage kit). ...
Call for price!

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: