These push buttons are typically used as “request to exit” devices in access control applications. They can be installed in a single‐gang electric box or can be mullion mounted.
Standard Exit Push Buttons
Stainless steel faceplate
Requires 12‐volt AC or DC power to illuminate exit button
1211-080 - Mounts into a single-gang electric box
1211-081 - Mullion mount
Piezoelectric Switches
Vandal resistant stainless steel faceplate and button cap
Piezoelectric switch
Selectable illumination status (red, green)
Requires 12 to 24 Volt DC power
1211-090 - Mounts into a single-gang electric box
1211-091 - Mullion mount
The DKS 1500 series family of keypads provides access control for virtually any application where digital code entry is desired and they are available for stand-alone applications or for connection to an access controller. These vandal resistant keypads (except 1509) use stainless steel faceplates, galvanized steel sub-plates and are housed in a rugged steel cabinet. The 1503 and 1506 series keypads are available in surface or flush mount styles. The 1509 is designed for indoor applications and ..
Click on the Related Products Tab to Order Required Memory
Standalone Card Reader Surface Mount -programmable card reader system can store up to 1000 card codes. Includes 1000 memory, 16.5 volt, 20 VA plug-in transformer.AWID Reader See Memory upgrade Below
The model 1520 provides users with a full feature single door stand-alone access control system. The 1520 is available with a built-in proximity card reader or can be ordered as a single door controller allowing the user to add their..
Gate operator control stations provide complete manual control for DKS vehicular gate operators. The unique logic inputs found on DKS gate operators require only 3 wires for connection to a 3‐button control station.
Manual control devices for DKS vehicular gate operators
Interior and exterior..
Gate operator control stations provide complete manual control for DKS vehicular gate operators. The unique logic inputs found on DKS gate operators require only 3 wires for connection to a 3‐button control station.
Manual control devices for DKS vehicular gate operators
Interior and exterior..