Doorking 1602 1hp 115V Barrier Gate Operator with Convenience Open DC(order arm and hardware kit separately) 1601-091

Doorking 1602 1hp 115V Barrier Gate Operator with Convenience Open DC(order arm and hardware kit separately) 1601-091

Call for price

ACCESSORIES & RELATED MODELS

Doorking 1835 PC Programmable Telephone Entry System- Surface Mount,  Stainless Steel 1835-080

Doorking 1835 PC Programmable Telephone Entry System- Surface Mount, Stainless Steel 1835-080

Click on the "Related Products" Tab Above for all 1835 Models The Model 1835 is an ideal telephone entry system suited for apartment and gated community applications as well as office buildings and industrial sites that have a separate access control system, or require telephone entry only.   The single-line LCD display features big 1/2-inch characters for easy viewing and your personalized message scrolls across the screen from right to left when the system is not in use.  ..

Linear AK-21W Exterior Digital Keypad ACP00750

Linear AK-21W Exterior Digital Keypad ACP00750

The Model AK-21W Exterior Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp..

SOS-VIII Siren Sensor DISCONTINUED (See SAG Sensor)

SOS-VIII Siren Sensor DISCONTINUED (See SAG Sensor)

Fire marshals are asking installers to use this life and time saving device. It will open any manufacturer's gate "hands-free". The siren of the fire truck or other emergency vehicle is all that is needed to signal this unique SOS unit. It is the owner's obligation to provide access for emergency equipment, it must be periodically tested and confirmed operational. The SOS is designed for non-directional use at gated compounds. Audio range: ten to one hundred feet (dial adjusta..

Doorking 9409 Plug-in 2 channel Loop Detector 9409-010

Doorking 9409 Plug-in 2 channel Loop Detector 9409-010

Click on the "Related Products" Tab Above for More Models Loop detectors and loops are strongly recommended on all automated vehicular gate applications to help prevent gates from closing on vehicles in the path of the gate. DKS Single & Two-Channel Loop Detectors Model 9410-010 DKS Single Channel Loop Detector Model 9409-010 DKS Two Channel Loop Detector Plug‐in detector ‐ use with DKS gate operators only Reno A&E Loop Detectors Model 9402‐045 Reno A..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Doorking Fan Kit for 1601 Barrier Gate Operators  1601-0932

Doorking Fan Kit for 1601 Barrier Gate Operators 1601-0932

DKS heater and fan kits allow Gate Operator systems to remain operating in cold environments.  Use if temperature routinely falls below 10°F (‐12°C). 1601‐154 Heater Kit Use this heater kit with the following models: 6050, 6100, 6300, 9050, 9100, 9150, 9000, 9310. 1601‐195 Heater Kit - 115 VAC Use this heater kit with the following model: 9210. 1601-197 Heater Kit - 208/230 VAC   Use this heater kit with the following models: 9210, 9220, ..

Doorking 2600 High Voltage Kit. Required to upgrade Voltage from 115vac 2600-266

Doorking 2600 High Voltage Kit. Required to upgrade Voltage from 115vac 2600-266

Allows the operator to be powered from 208,230,460 or 575 source-voltage. In dual gate applications, only one (1) kit is required (secondary operator DOES NOT require a high voltage kit)...

Click on the "Related Products" Tab Above for More Models

The 1602 operator is designed for traffic lanes up to 20-feet wide in low use commercial and industrial applications. This operator uses a counter-balanced three-piece wishbone style arm assembly. The 1602 operator is designed so that it can be mounted on either the left or right hand side of the roadway. The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.

Available w/ High Voltage Kit for Source Voltages over 115V
Convenience Open Option

Booms and Mounting sold separately

Features: 

  • Magnetic limit control.
  • Ports for plug-in loop detectors.
  • Automatic sequencing inputs for use with slide and swing gate operators.
  • Up input memory buffer.
  • Down memory option.
  • Multiple up commands.
  • Two convenience outlets.
  • 360° gear box rotation.
  • Gate tracker reporting output.
  • Programming switches.
  • Built-in power On/Off switch.
  • Left or right hand mount.
  • Aluminum barrier arms in various lengths (not included, order separately).
  • Barrier arm hardware kit (not included, order separately).
  • Manual Crank kit available (1601-170).
  • Crank kit is a factory installed option only.

Specifications: 

  • 1 HP continuous-duty motor.
  • 60:1 gear-box running in a continuous oil bath.
  • 115, 230*, 460* VAC.  (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
  • Arm rotates 90° in approximately 5.5 seconds.
  • Class III and IV applications.
  • Compliant with UL 325 and 991.  ETL Listed.  (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.  Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
  • Dimensions (operator only): 15.25"W x 39.75"H x 15.75"D.

Options: 

DC powered convenience open.

Aluminum barrier arms up tp 27' - counter balanced.

Plug-in loop detectors.

Heater kit.

Fan kit.

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Doorking 1835 PC Programmable Telephone Entry System- Surface Mount,  Stainless Steel 1835-080

Doorking 1835 PC Programmable Telephone Entry System- Surface Mount, Stainless Steel 1835-080

Click on the "Related Products" Tab Above for all 1835 Models The Model 1835 is an ideal telephone entry system suited for apartment and gated community applications as well as office buildings and industrial sites that have a separate access control system, or require telephone entry only.   The single-line LCD display features big 1/2-inch characters for easy viewing and your personalized message scrolls across the screen from right to left when the system is not in use.  ..

Linear AK-21W Exterior Digital Keypad ACP00750

Linear AK-21W Exterior Digital Keypad ACP00750

The Model AK-21W Exterior Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp..

SOS-VIII Siren Sensor DISCONTINUED (See SAG Sensor)

SOS-VIII Siren Sensor DISCONTINUED (See SAG Sensor)

Fire marshals are asking installers to use this life and time saving device. It will open any manufacturer's gate "hands-free". The siren of the fire truck or other emergency vehicle is all that is needed to signal this unique SOS unit. It is the owner's obligation to provide access for emergency equipment, it must be periodically tested and confirmed operational. The SOS is designed for non-directional use at gated compounds. Audio range: ten to one hundred feet (dial adjusta..

Doorking 9409 Plug-in 2 channel Loop Detector 9409-010

Doorking 9409 Plug-in 2 channel Loop Detector 9409-010

Click on the "Related Products" Tab Above for More Models Loop detectors and loops are strongly recommended on all automated vehicular gate applications to help prevent gates from closing on vehicles in the path of the gate. DKS Single & Two-Channel Loop Detectors Model 9410-010 DKS Single Channel Loop Detector Model 9409-010 DKS Two Channel Loop Detector Plug‐in detector ‐ use with DKS gate operators only Reno A&E Loop Detectors Model 9402‐045 Reno A..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Doorking Fan Kit for 1601 Barrier Gate Operators  1601-0932

Doorking Fan Kit for 1601 Barrier Gate Operators 1601-0932

DKS heater and fan kits allow Gate Operator systems to remain operating in cold environments.  Use if temperature routinely falls below 10°F (‐12°C). 1601‐154 Heater Kit Use this heater kit with the following models: 6050, 6100, 6300, 9050, 9100, 9150, 9000, 9310. 1601‐195 Heater Kit - 115 VAC Use this heater kit with the following model: 9210. 1601-197 Heater Kit - 208/230 VAC   Use this heater kit with the following models: 9210, 9220, ..

Doorking 2600 High Voltage Kit. Required to upgrade Voltage from 115vac 2600-266

Doorking 2600 High Voltage Kit. Required to upgrade Voltage from 115vac 2600-266

Allows the operator to be powered from 208,230,460 or 575 source-voltage. In dual gate applications, only one (1) kit is required (secondary operator DOES NOT require a high voltage kit)...

File Name Size Link
Doorking 1601 & 1602 Install Manual 7.11Mb download
Doorking 1602 Spec Brochure Spanish 0.21Mb download
Doorking 1602 Spec Brochure 0.53Mb download
DKS 1602 Spec 0.03Mb download