Upswung Concrete Loop Sealant 10 Oz Tube- Grey

Upswung Concrete Loop Sealant 10 Oz Tube- Grey
Qty:

Upswung Concrete Loop Sealant 10 Oz Tube- Grey

Upswung Concrete Loop Sealant 10 Oz Tube- Grey

 

EMX 4' X 8' Vehicle Loops with 50 ft Lead-in -Priced  With Purchase of Detector EMX 4' X 8' Vehicle Loops with 50 ft Lead-in -Priced With Purchase of Detector
The Lite Preformed Loop is a ready-to-use loop that works with all EMX vehicle loop detectors. This lightweight preformed loop is suitable for saw cut, tar and concrete installations. Inquire for special sizes and quotes.      *...
$88.00
Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP
Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All dete...
$121.38
Reno PLB-20-50-RA Preformed Loop (4' X 6' X 50 ft lead-in from corner) Reno PLB-20-50-RA Preformed Loop (4' X 6' X 50 ft lead-in from corner)
Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot...
$136.68
Reno PLB-36-50-RA Preformed Loop (6' X 12' X 50 ft lead-in from corner) Reno PLB-36-50-RA Preformed Loop (6' X 12' X 50 ft lead-in from corner)
Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot...
$171.36
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner) Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)
Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot...
$144.84

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: