Your shopping cart is empty!
Doorking 6300 1/2hp 115V Swing Gate Operator Secondary (Slave Unit) 6300-081
ACCESSORIES & RELATED MODELS
SELECT PRODUCT TO ADD TO CART WITH YOUR PURCHASE
SELECT PRODUCT TO ADD TO CART WITH YOUR PURCHASE
|
|||||||
| Total accessories: | $0.0 | ||||||
| Total product with accessories: | $0.00 | ||||||
Doorking 6300 1/2hp 115V Swing Gate Operator Secondary (Slave Unit) 6300-081
Click on the "Related Products" Tab Above for More Models
Model 6300 with 1/2 HP Motor
The 6300 series operators are designed to operate vehicular swing gates in residential, commercial and industrial applications. These operators are designed so that they can be either pad or post mounted without any costly and time consuming field modifications. You need to specify which mounting method when ordering. The unique design of these operators allows the gate arm to be attached to the bottom rail of the gate. This eliminates the need for any brackets to be welded to the face of the gate and creates an aesthetically pleasing installation.
These operators can be equipped with a factory installed DC Convenience Open option which will automatically open the gate in the event of a power outage.
*Pad or Post Mount Kit Required*
*Pad or Post Mount Kit Required*
Features
- Self-adjusting, no maintenance magnetic limits.
- Overlap feature for dual swing gate operation.
- Designed with a built-in primary and secondary entrapment prevention system.
- Ports for plug-in loop detectors.
- Two convenience outlets.
- Fail-safe release.
- Tamper detect circuit.
- DC Powered convenience open (optional).
- Gate tracker reporting output.
- Programming switches.
- Built-in reset switch.
- Built-in power On/Off switch.
Specifications
Model 6300 with 1/2 HP Motor- Maximum gate width 18-feet.
- Maximum gate weight 700 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
- Swings gate 90 degrees in approximately 15-seconds.
- 1/2 HP continuous-duty motor.
- 115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
- Class I, II, III and IV applications.
- Compliant with UL 325 and 991. ETL Listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
- Dimensions (operator only): 16.25"W x 13.5"H* x 32 "D (* Height of operator only. Actual height above ground is determined by which mounting method is used)
- Maximum gate width 22-feet.
- Maximum gate weight 800 pounds*. (*Assumes gate swings level and is in good condition with properly adjusted hardware. Other external factors may affect the performance of the gate operator.)
- Swings gate 90 degrees in approximately 15-seconds.
- 1 HP continuous-duty motor.
- 115, 230*, 460* VAC. (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)
- Class I, II, III and IV applications.
- Compliant with UL 325 and 991. ETL listed. (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator. Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
- Dimensions (operator only): 16.25"W x 13.5"H* x 32 "D (* Height of operator only. Actual height above ground is determined by which mounting method is used)
|
Doorking 2600 Pad Mount, Arms and Hardware Kit for 6300 Gate Operators ,2600-264 Click on the "Related Products" Tab Above for More Models Pad Mounting Kit - 6300 series Pad mounting kit allows the operator to be mounted directly to a concrete pad. Kit includes mounting base and necessary hardware. Use this kit with... |
Call for price! |
|
|
Doorking 2600 Post Mount, Arms and Hardware Kit for 6300 Series 2600-263 Click on the "Related Products" Tab Above for More Models Post Mounting Kit - 6300 series Post mounting kit allows the operator to be mounted on pipes. Kit includes two 2 inch x 3 foot pipes and necessary hardware. Use this kit with the... |
Call for price! |
|
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner) Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot... |
$144.84 |
|
Doorking 9409 Plug-in 2 channel Loop Detector 9409-010 Click on the "Related Products" Tab Above for More Models Loop detectors and loops are strongly recommended on all automated vehicular gate applications to help prevent gates from closing on vehicles in the path of the gate. DKS Singl... |
Call for price! |
|
Doorking 1200 Three Button Gate Exterior/Interior Controller 1200-017 Gate operator control stations provide complete manual control for DKS vehicular gate operators. The unique logic inputs found on DKS gate operators require only 3 wires for connection to a 3‐button control station. Manual control devices for D... |
Call for price! |
|
Upswung Residential or Commercial Complete Gate Entry and Exit Accessory package. Includes intercom, loops,keypad and wireless receiver and transmitters This specially designed package covers all of your Commercial/Residential needs for Entry and Exit access control to and from your property. Whether it be a Swing Style or Slide Style or Barrier Operator this package offer is complete for... |
$1,855.00 |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
Upswung Corp © 2018