Doorking 9100 1/2 hp 115V Commercial and Residential Slide Gate Operator 9100-080

Doorking 9100 1/2 hp 115V Commercial and Residential Slide Gate Operator 9100-080

Click on the "Related Products" Tab Above for More Models

The Model 9100 operator is designed to operate vehicular slide gates in residential and commercial applications. The 9100 is designed so that it can easily be mounted in the front, center or rear of the gate without any costly and time consuming field modifications. In addition, the operator can be pad or post mounted to meet any installation requirements.

Features: 

• Self-adjusting, no maintenance magnetic limits.
• Partial-open feature.
• Anti-tailgating feature.
• Gate tracker reporting output.
• Ports for plug-in loop detectors.
• Two convenience outlets.
• Fail-safe release (fail-secure optional).
• Programming switches.
• Built-in reset switch.
• Built-in power On/Off switch.

Specifications: 

• Maximum gate length 30-feet.
• Maximum gate weight 1000 pounds*.  (*Assumes gate is on level ground, in good condition with properly adjusted hardware.   Other external factors may affect the performance of the gate operator.)
• 1/2 HP continuous-duty motor.
• 115 VAC, 5.4 Amps.
• Operator is shipped with chain brackets and 20-feet of #40 chain.
• Class I, II,   III and IV applications.
• Compliant with UL 325 and 991.  ETL Listed.  (Note: To be compliant with UL 325 and industry safety guidelines, a secondary entrapment prevention device(s) is required to be installed with this gate operator.   Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)
• Dimensions: 12"W x 24"H x 11.5"D

Options: 

Nickel plated chain.

Stainless steel chain.

Plug-in loop detectors.

Heater kit for cold environments.

Base plate to post mount this operator (does not include posts).

Surge suppressors.

	Doorking 1200 Three Button Gate Exterior/Interior Controller 1200-017 Gate operator control stations provide complete manual control for DKS vehicular gate operators. The unique logic inputs found on DKS gate operators require only 3 wires for connection to a 3‐button control station. Manual control devices for D...	Call for price!
	Doorking 2600 Base plate (use for post mounting) Gate Operators 9050 and 9100 2600-418 Click on the "Related Products" Tab Above for More Models Doorking 2600-418 Base plate (Required for post mounting). Use with 9050 and 9100 operators ...	Call for price!
	Doorking 9409 Plug-in 2 channel Loop Detector 9409-010 Click on the "Related Products" Tab Above for More Models Loop detectors and loops are strongly recommended on all automated vehicular gate applications to help prevent gates from closing on vehicles in the path of the gate. DKS Singl...	Call for price!
	Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner) Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot...	$144.84

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: