FAAC DSP-Loop Detector DSP 7 10-30 VAC/VDC (Barrier) 2659

FAAC DSP-Loop Detector DSP 7 10-30 VAC/VDC (Barrier) 2659

Call for price

ACCESSORIES & RELATED MODELS

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680,  (Replaces 2667 and 2665)

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680, (Replaces 2667 and 2665)

Details Repalces FAAC 2667 and 2665 Loop Detectors 11 Pin Plug in base. Automatic calibration when switching or setting, a USB interface for use with modern diagnostic and service. The same features as the those it replaces.  ..

FAAC DSP-15 Loop Detector FAIL Safe 2664

FAAC DSP-15 Loop Detector FAIL Safe 2664

SPECIFICATIONS: Dimensions: 4" x .87" x 2.75" 2 Relays Relay A: Provides main detection output, modifiable by delay and extension Relay B: Switch Selectable to 4 options - True presence, Pulse on Exit, Pulse on Enter, Loop fail output Frequency: Automatically tunes to 4 operating frequencies Sensitivity: 10 settings to ensure detection of high bed vehicles Connector: 10 position terminal block (no harness required) Indicators: Separate power/fail and detect LED..

FAAC DSP-Loop Detector DSP 7 10-30 VAC/VDC (Barrier) 2659

FAAC DSP-Loop Detector DSP 7 10-30 VAC/VDC (Barrier) 2659

This is FAAC Loop Detector DSP 7. Hard wires into control panel backplate. Strictly for 620,615,640 FAAC Barrier Operators. This loop detector can handle all parking, drive-thru and access control applications. Can be used as a safety loop or as a free exit loop detector. 10-30 VAC/VDC FEATURES: Enclosure: Impact resistant, high temperature plastic 1.75" x 2.375" x 3.61" Loop Size: Works with any in-ground inductive loop 20 - 1000nH Frequency: Automatically tunes t..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Reno PLH-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in at loop corner)

Reno PLH-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in at loop corner)

Application: Highways - Install under Asphalt Overlay or Embed in Concrete The Model PLH Preformed Loop is a prefabricated loop / lead-in assembly designed to be overlaid with hot asphalt or embedded in concrete. Each component of the PLH (loop cable, lead-in cable, and splice enclosure) is designed to maximize durability, minimize water penetration, and maintain a flexible form that is easy to install and handle. The low profile loop cable and lead-in cable are 0.360&rdqu..

This is FAAC Loop Detector DSP 7. Hard wires into control panel backplate. Strictly for 620,615,640 FAAC Barrier Operators. This loop detector can handle all parking, drive-thru and access control applications. Can be used as a safety loop or as a free exit loop detector.
10-30 VAC/VDC

FEATURES:

  • Enclosure: Impact resistant, high temperature plastic
  • 1.75" x 2.375" x 3.61"
  • Loop Size: Works with any in-ground inductive loop 20 - 1000nH
  • Frequency: Automatically tunes to 4 frequencies
  • Outputs: 2 separate relays that are front panel programmable
  • Delay: Yes

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
FAAC Vehicle loop Detector, Plug-In Loop Detector 2680,  (Replaces 2667 and 2665)

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680, (Replaces 2667 and 2665)

Details Repalces FAAC 2667 and 2665 Loop Detectors 11 Pin Plug in base. Automatic calibration when switching or setting, a USB interface for use with modern diagnostic and service. The same features as the those it replaces.  ..

FAAC DSP-15 Loop Detector FAIL Safe 2664

FAAC DSP-15 Loop Detector FAIL Safe 2664

SPECIFICATIONS: Dimensions: 4" x .87" x 2.75" 2 Relays Relay A: Provides main detection output, modifiable by delay and extension Relay B: Switch Selectable to 4 options - True presence, Pulse on Exit, Pulse on Enter, Loop fail output Frequency: Automatically tunes to 4 operating frequencies Sensitivity: 10 settings to ensure detection of high bed vehicles Connector: 10 position terminal block (no harness required) Indicators: Separate power/fail and detect LED..

FAAC DSP-Loop Detector DSP 7 10-30 VAC/VDC (Barrier) 2659

FAAC DSP-Loop Detector DSP 7 10-30 VAC/VDC (Barrier) 2659

This is FAAC Loop Detector DSP 7. Hard wires into control panel backplate. Strictly for 620,615,640 FAAC Barrier Operators. This loop detector can handle all parking, drive-thru and access control applications. Can be used as a safety loop or as a free exit loop detector. 10-30 VAC/VDC FEATURES: Enclosure: Impact resistant, high temperature plastic 1.75" x 2.375" x 3.61" Loop Size: Works with any in-ground inductive loop 20 - 1000nH Frequency: Automatically tunes t..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Reno PLH-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in at loop corner)

Reno PLH-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in at loop corner)

Application: Highways - Install under Asphalt Overlay or Embed in Concrete The Model PLH Preformed Loop is a prefabricated loop / lead-in assembly designed to be overlaid with hot asphalt or embedded in concrete. Each component of the PLH (loop cable, lead-in cable, and splice enclosure) is designed to maximize durability, minimize water penetration, and maintain a flexible form that is easy to install and handle. The low profile loop cable and lead-in cable are 0.360&rdqu..