EMX ULTRA  D-TEK Vehicle Loop Detector Plug In Style

EMX ULTRA D-TEK Vehicle Loop Detector Plug In Style

Call for price

ACCESSORIES & RELATED MODELS

EMX D-TEK Vehicle Loop Detector Board

EMX D-TEK Vehicle Loop Detector Board

The D-TEK Vehicle Loop Detector was designed for easy installation and operation. It provides maximum surge protection on all inputs and outputs of the detector.        Benefits include: Easy installation and operation Installs into small operator housings Reliable with marginal loops All inputs and outputs have maximum surge protection 4-layer board provides maximum durability and RF blocking Full array of features and controls supports v..

EMX 4' X 8' Vehicle Loops with 50 ft Lead-in -Priced  With Purchase of Detector

EMX 4' X 8' Vehicle Loops with 50 ft Lead-in -Priced With Purchase of Detector

The Lite Preformed Loop is a ready-to-use loop that works with all EMX vehicle loop detectors. This lightweight preformed loop is suitable for saw cut, tar and concrete installations. Inquire for special sizes and quotes.      *You Must Purchase a Detector with this Item Benefits include: Easy to install Electronic lightning protection Rugged and flexible TPE tubing Custom sizing Features Constructed of stranded wire conductors with XLP thermoplas..

EMX DTM-9 (12, 24 or 120 Volt) Programmable Timer

EMX DTM-9 (12, 24 or 120 Volt) Programmable Timer

The DTM-9 Seven Day Timer allows you to program your overhead doors, gates, and parking barriers for heavy traffic flow and lock-out times. The DTM-9 will keep your overhead doors, gates and parking barriers continuously open during rush hours. This will increase comfort and save on entry and exit times for your employees and customers. The DTM-9 will allow you to program the lock out times for your doors with magnetic locks and electric strikes.        Benefit..

EMX IRB-325 Infrared Photoeye Sensor with Hoods Included

EMX IRB-325 Infrared Photoeye Sensor with Hoods Included

The Infrared Photoeye Sensor IRB-325 is an external entrapment protection, device-type B1, non-contact sensor for use with automatic gate operators. The IRB-325 produces a detection signal when the infrared beam is broken.        Benefits include: UL 325 compliant Long range Powder coated steel hoods provide damage protection Features Range: 6 to 65 feet Power: 12V to 24V DC or AC 150mA Relay Contacts: 30V 1A Housing: UL an..

The Ultra D-TEK Vehicle Loop Detector delivers plug-in compatibility with Elite’s OmniControl™ board operators such as the
The Ultra D-TEK may be used in the Center, Safety and Exit slots on the operator control board.

Sensitivity selection is simplified by the ULTRAMETER™ display that indicates the appropriate sensitivity setting to detect the vehicle positioned on the loop.
The 10 sensitivity settings allow for finer adjustment of the detection level, while the 4 frequency settings provide greater flexibility in preventing crosstalk in multi-loop applications.

       Benefits include:

  • Compact design
  • Energy efficient
  • Easy to install and setup
  • Reliable
  • Cost effective
Features
  • ULTRAMETER™ (displays optimum sensitivity setting / crosstalk interference)
  • Frequency count/reset switch
  • 10 sensitivity settings
  • Loop diagnostics
  • 4 operating frequencies
  • Lightning and surge protection
  • Loop fail output
  • Frequency counter
  • ASB (Automatic Sensitivity Boost)
  • Filter
  • CE compliant
  • Optional accessories include PR-Loop,

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
EMX D-TEK Vehicle Loop Detector Board

EMX D-TEK Vehicle Loop Detector Board

The D-TEK Vehicle Loop Detector was designed for easy installation and operation. It provides maximum surge protection on all inputs and outputs of the detector.        Benefits include: Easy installation and operation Installs into small operator housings Reliable with marginal loops All inputs and outputs have maximum surge protection 4-layer board provides maximum durability and RF blocking Full array of features and controls supports v..

EMX 4' X 8' Vehicle Loops with 50 ft Lead-in -Priced  With Purchase of Detector

EMX 4' X 8' Vehicle Loops with 50 ft Lead-in -Priced With Purchase of Detector

The Lite Preformed Loop is a ready-to-use loop that works with all EMX vehicle loop detectors. This lightweight preformed loop is suitable for saw cut, tar and concrete installations. Inquire for special sizes and quotes.      *You Must Purchase a Detector with this Item Benefits include: Easy to install Electronic lightning protection Rugged and flexible TPE tubing Custom sizing Features Constructed of stranded wire conductors with XLP thermoplas..

EMX DTM-9 (12, 24 or 120 Volt) Programmable Timer

EMX DTM-9 (12, 24 or 120 Volt) Programmable Timer

The DTM-9 Seven Day Timer allows you to program your overhead doors, gates, and parking barriers for heavy traffic flow and lock-out times. The DTM-9 will keep your overhead doors, gates and parking barriers continuously open during rush hours. This will increase comfort and save on entry and exit times for your employees and customers. The DTM-9 will allow you to program the lock out times for your doors with magnetic locks and electric strikes.        Benefit..

EMX IRB-325 Infrared Photoeye Sensor with Hoods Included

EMX IRB-325 Infrared Photoeye Sensor with Hoods Included

The Infrared Photoeye Sensor IRB-325 is an external entrapment protection, device-type B1, non-contact sensor for use with automatic gate operators. The IRB-325 produces a detection signal when the infrared beam is broken.        Benefits include: UL 325 compliant Long range Powder coated steel hoods provide damage protection Features Range: 6 to 65 feet Power: 12V to 24V DC or AC 150mA Relay Contacts: 30V 1A Housing: UL an..

File Name Size Link
EMX Ultra DTEK Cutsheet 1.22Mb download
EMX Ultra DTEK Instructions 0.22Mb download
Ramset Jet Operator Install Manual 1.92Mb download
Magnetic MPS Motorized Swing Gates 2.03Mb download