EMX USVD 4X Drive Through Vehicle Sensor/Loopless

EMX USVD 4X Drive Through Vehicle Sensor/Loopless

ACCESSORIES & RELATED MODELS
SELECT PRODUCT TO ADD TO CART WITH YOUR PURCHASE


Total accessories: $0.0
Total product with accessories: $220.42
Qty:

EMX USVD 4X Drive Through Vehicle Sensor/Loopless

The USVD-4X Drive Thru Vehicle Sensor uses patent pending Triangular Planar Array (TPA) technology to detect the presence of a vehicle. The USVD handles any drive thru operation such as fast food, banking, pharmacies, car washes and parking.

For these types of applications, the USVD Drive Thru Vehicle Sensor is much less expensive than traditional vehicle loop detectors, which require the installation of a loop in pavement. The USVD is simply mounted on a post or order box, and aimed at the location where a vehicle would pass to initiate a transaction. No set-up or adjustments required.

The USVD requires 12-24VDC/VAC, and provides a form "C" set or relay contacts indicating vehicle presence. Utilizing TPA technology, the detection head consists of 4 ultrasonic transducers that connect to the internal microprocessor-based control board. The detection head "scans" the expected location for a vehicle and activates its output upon detection of a vehicle.

       Benefits include:

  • Installs easily above ground
  • Reduces cost
  • Streamlines operations
  • Robust design
Features
  • Triangular Planar Array Technology
  • Aux. relay, settings for pulse on ENTRY, EXIT or BOTH
  • Output delay option for 1, 2 and 4 seconds
  • Operating range: 1ft. – 5ft.
  • Response time: 2.0 seconds
  • Supply Voltage12…24 VDC/VAC
  • Relay output configuration: 2 SPDT (form C)

 
 
 
  •  
EMX IRB-325 Infrared Photoeye Sensor with Hoods Included EMX IRB-325 Infrared Photoeye Sensor with Hoods Included
The Infrared Photoeye Sensor IRB-325 is an external entrapment protection, device-type B1, non-contact sensor for use with automatic gate operators. The IRB-325 produces a detection signal when the infrared beam is broken.    &n...
$263.00
EMX DTM-9 (12, 24 or 120 Volt) Programmable Timer EMX DTM-9 (12, 24 or 120 Volt) Programmable Timer
The DTM-9 Seven Day Timer allows you to program your overhead doors, gates, and parking barriers for heavy traffic flow and lock-out times. The DTM-9 will keep your overhead doors, gates and parking barriers continuously open during rush hours. This...
$147.29
EMX 4' X 8' Vehicle Loops with 50 ft Lead-in -Priced  With Purchase of Detector EMX 4' X 8' Vehicle Loops with 50 ft Lead-in -Priced With Purchase of Detector
The Lite Preformed Loop is a ready-to-use loop that works with all EMX vehicle loop detectors. This lightweight preformed loop is suitable for saw cut, tar and concrete installations. Inquire for special sizes and quotes.      *...
$88.00
EMX  LP D-TEK Vehicle Loop Detector EMX LP D-TEK Vehicle Loop Detector
EMX Industries designed the LP D-TEK Vehicle Loop Detector for applications in which vehicle detection is needed and low power consumption is desired. The LP D-TEK’s low 9 mA current draw makes it ideal for solar applications, and gate or door ...
$178.00

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: