FAAC Photobeam Set Factory Monitored 785163

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance.

  • Wall Mounted or Post Mounted (add posts below!)
  • Directional photocell with diagonal alignment
  • Angle of detection +- 4 degrees
  • Range: 100 ft
  • Obstacle Detection Time: 10ms
  • Housing Protection: IP 54
  • Required power supply: 24-35 VDC available on FAAC control panels
  • Output Relay Rating: 100MA/24VDC
  • Output Relay: N.O. (Normally opened) & N.C. (Normally Closed)
  • Dimensions: 2.75" x 3.75" x 1.75"

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: