FAAC 402 Positve Stop Kit
Product Description
Internal Positive Stop
For use with the model 402 actuator
Stainless steel construction
Mounts with existing FAAC hardware and does not require additional mounting points
Accommodates inward or outward
Positive gate stops, which limit the travel of each gate leaf, are required in the opened and closed positions for all FAAC operators. In the past installers used post, rods or angles to make the gates stop at the correct location. Today FAAC offers the innovative Stop-O-Matic Model. An an adjustable gate stop that attaches directly to the gate operator. For aesthetic purposes, this model is totally concealed under the operator cover.
Features include:
Stainless steel construction
Mounts with existing FAAC hardware and does not require additional attachment points
Accommodates inward or outward swing with no additional fabrication
Maximum degrees of swing: limited by operator
Maximum leaf length & weight: limited by operator
FEATURES:
4 Channel capability/4buttons
Visor clip included
Dimensions: 2" x 2.5" x .5"
Transmitter XT4 works with the Receiver 433 RC Plug In Style..
Two-Button Switch
Features:
.Switch rating: 250 VAC; 10 amps
.Indoor or outdoor use
.Painted aluminum
.Surface mounted
.Open buatton is N.O. (Normally Opened)
.Close button is N.O. (Normally Opened)
For use with B, C, and P FAAC control panel logics:
B = 3 momentary switches: open, close and stop
C = 2 continuous pressure switches: open and close;
P = 3 momentary switches: open, close.
Dimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep
(10.2 cm x 7.3 cm..
Three-Button Switch
Features:
.Switch rating: 250 VAC; 10 amps
.Indoor or outdoor use
.Painted aluminum
.Surface mounted
.Open buatton is N.O. (Normally Opened)
.Close button is N.O. (Normally Opened)
.Stop button is N.C. (Normally Closed)
For use with B, C, and P FAAC control panel logics:
B = 3 momentary switches: open, close and stop
C = 2 continuous pressure switches: open and close;
1 momentary pressure switch: stop
P = 3 momentary switches: open, clos..
433 RC Plug in style Single Channel receiver works with the XT4 Transmitter..
Monolec Hydraulic Fluid. This oil is the only recommended replacement fluid for all hydraulic gate operators...
This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance.
Wall Mounted or Post Mounted (add posts below!)
Directional photocell with diagonal alignment
Angle of detection +- 4 degrees
Range: 100 ft
Obstacle Detection Time: 10ms
Housing Protection: IP 54
Required power supply: 24-35 VDC available on FAAC control..
FAAC 400 Positve Stop Kit
Product Description
Internal Positive Stop
For use with the model 400 EG and CBAC actuator
Stainless steel construction
Mounts with existing FAAC hardware and does not require additional mounting points
Accommodates inward or outward
Positive gate stops, which limit the travel of each gate leaf, are required in the opened and closed positions for all FAAC operators. In the past installers used post, rods or angles to make the gates stop ..
FAAC422 Positve Stop Kit
Product Description
Internal Positive Stop
For use with the model 422 actuator
Stainless steel construction
Mounts with existing FAAC hardware and does not require additional mounting points
Accommodates inward or outward
Positive gate stops, which limit the travel of each gate leaf, are required in the opened and closed positions for all FAAC operators. In the past installers used post, rods or angles to make the gates stop at the correct loca..
FAAC 400 Positve Stop Kit
Product Description
Internal Positive Stop
For use with the model 400 EG and CBAC actuator
Stainless steel construction
Mounts with existing FAAC hardware and does not require additional mounting points
Accommodates inward or outward
Positive gate stops, which limit the travel of each gate leaf, are required in the opened and closed positions for all FAAC operators. In the past installers used post, rods or angles to make the gates stop ..
File Name
Size
Link
FAAC Manual Postive Stops
0.29Mb
download