FAAC 455D Control Board Only - 115VAC for FAAC  400, 402, 422, 750, 760.

FAAC 455D Control Board Only - 115VAC for FAAC 400, 402, 422, 750, 760.

Call for price

ACCESSORIES & RELATED MODELS

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

FAAC XT4 Wireless Receiver 433 RC Plug In Style  787741

FAAC XT4 Wireless Receiver 433 RC Plug In Style 787741

433 RC Plug in style Single Channel receiver works with the XT4 Transmitter..

FAAC XT4 Transmitter 433 RC FCC 787453

FAAC XT4 Transmitter 433 RC FCC 787453

FEATURES: 4 Channel capability/4buttons Visor clip included Dimensions: 2" x 2.5" x .5" Transmitter XT4 works with the Receiver 433 RC Plug In Style..

FAAC Two-Button Switch/Exterior Station 2512

FAAC Two-Button Switch/Exterior Station 2512

Two-Button Switch Features: .Switch rating: 250 VAC; 10 amps .Indoor or outdoor use .Painted aluminum .Surface mounted .Open buatton is N.O. (Normally Opened) .Close button is N.O. (Normally Opened) For use with B, C, and P FAAC control panel logics: B = 3 momentary switches: open, close and stop C = 2 continuous pressure switches: open and close; P = 3 momentary switches: open, close. Dimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep (10.2 cm x 7.3 cm..

FAAC E024U Control Board (enclosure not included) for FAAC S800H, S450H, S418, 770, 415 and 390 202025

FAAC E024U Control Board (enclosure not included) for FAAC S800H, S450H, S418, 770, 415 and 390 202025

The E024U control board can be used with all 24V electro-mechanical and hydraulic swing gate operators. It features easy programming with trimmers and dip switches, powerful switching power supply, one pushbutton automatic self-learning and built-in battery back-up. It operates 6 different operators of the 24V line (S800H, S450H, S418, 770, 415 and 390). The New E024U Control Board is designed to be used with the following FAAC Swing Gate Operators: S418 Electro-mechanical Operator S450H ..

This is the FAAC 455D Control Board only. No enclosure is included. To be used as a replacement control panel for your FAAC gate system. Choose between 115V and 230V.

Compatible With:

  • FAAC 400
  • FAAC 402
  • FAAC 422
  • FAAC 750
  • FAAC 760
  • FAAC 615

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

FAAC XT4 Wireless Receiver 433 RC Plug In Style  787741

FAAC XT4 Wireless Receiver 433 RC Plug In Style 787741

433 RC Plug in style Single Channel receiver works with the XT4 Transmitter..

FAAC XT4 Transmitter 433 RC FCC 787453

FAAC XT4 Transmitter 433 RC FCC 787453

FEATURES: 4 Channel capability/4buttons Visor clip included Dimensions: 2" x 2.5" x .5" Transmitter XT4 works with the Receiver 433 RC Plug In Style..

FAAC Two-Button Switch/Exterior Station 2512

FAAC Two-Button Switch/Exterior Station 2512

Two-Button Switch Features: .Switch rating: 250 VAC; 10 amps .Indoor or outdoor use .Painted aluminum .Surface mounted .Open buatton is N.O. (Normally Opened) .Close button is N.O. (Normally Opened) For use with B, C, and P FAAC control panel logics: B = 3 momentary switches: open, close and stop C = 2 continuous pressure switches: open and close; P = 3 momentary switches: open, close. Dimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep (10.2 cm x 7.3 cm..

FAAC E024U Control Board (enclosure not included) for FAAC S800H, S450H, S418, 770, 415 and 390 202025

FAAC E024U Control Board (enclosure not included) for FAAC S800H, S450H, S418, 770, 415 and 390 202025

The E024U control board can be used with all 24V electro-mechanical and hydraulic swing gate operators. It features easy programming with trimmers and dip switches, powerful switching power supply, one pushbutton automatic self-learning and built-in battery back-up. It operates 6 different operators of the 24V line (S800H, S450H, S418, 770, 415 and 390). The New E024U Control Board is designed to be used with the following FAAC Swing Gate Operators: S418 Electro-mechanical Operator S450H ..

File Name Size Link
Faac 455D MANUAL 0.25Mb download