FAAC 844 ER Z16 Hydraulic Slide Gate Operator  Rack and Pinon 115VAC 1098371

FAAC 844 ER Z16 Hydraulic Slide Gate Operator Rack and Pinon 115VAC 1098371

Call for price

ACCESSORIES & RELATED MODELS

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC 1TM 418DS Transmitter Single channel transmitter – 418 Mhz Single channel transmitter – 418 Mhz Choice of over 1000 codes.12V battery included    ..

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC 1RP418DS Receiver for FAAC control panels. Use with 1TM418DS and 787317 transmitters.  ..

Upswung Residential or Commercial Complete Gate Entry and Exit Accessory package.  Includes intercom, loops,keypad and wireless receiver and transmitters

Upswung Residential or Commercial Complete Gate Entry and Exit Accessory package. Includes intercom, loops,keypad and wireless receiver and transmitters

This specially designed  package covers all of  your Commercial/Residential needs for Entry and Exit access control to and from your property. Whether it be a Swing Style or Slide Style or Barrier Operator this package offer is complete for a commercial activity envrioment that offers a security event control, tracking operation.   Please call for expert assistance regarding any and all Access Control devices or for package upgrades and specifice item information at 775-588-1..

Pach & Co UPM4S Universal Pedestal Mount (Standard) 47"H with 5"X5" Mount Base

Pach & Co UPM4S Universal Pedestal Mount (Standard) 47"H with 5"X5" Mount Base

Design for all Quantum products direct face-plate mounting and all AeGIS products with adapter plate Universal head face-plate: slot openings for mounting various manufacturers products Heavy duty 2-1/2" 11 gauge cold rolled steel tubing Heavy duty 10 gauge face-base plates and base cover Triple coat rust proof UV inhibitors enamel finish Stainless steel bolts and nuts included      ..

FAAC 844 ER Z16 Rack and Pinion Commercial and Industrial Gearmotor for sliding gates.

The model 844 designed for limited duty industrial applications. Available in chain and rack & pinion versions. Model 844 slide gate opener has 2 year limited warranty

  • Ideal for commercial and industrial applications
  • Anti-crushing safety
  • As the gearmotor is non reversing, no electric locks need be installed
  • In the event of power failure, the key-operated release device makes it possible
  • to open and close the gate manually
  • Twin-disk clutch in oil-bath
  • Inductive or magnetic travel limit (according to model).

MODEL 844 RACK & PINION KITS INCLUDE: One operator, 780 D control panel, 16 tooth pinion, mounting angle brackets and limit switch plates. Note: Rack is not included

  • VACManual release (non-keyed)
  • “Soft Stop” on opening and closing
  • 3/4 hp motor
  • Oil immersed clutch which, when properly adjusted,
    limits the amount of pressure the operator can apply to moving the gate.
  • Duty Cycle: 70% motor run time
  • Microprocessor control: Choose from 4 operating modes.
  • 230 VAC

    Power supply voltage 230 Vac (+6% -10%) 50 (60) Hz

    Absorbed power 650 W

    Absorbed current 3.5 A

    Traction and thrust force 0-110 daN (Z16)

    Motor rotation speed 1400 r.p.m.

    Reduction ratio 1:30

    Operating ambient temperature -20 °C to +55 °C

    Weight with oil 14.5 kg

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC XT 1TM 418DS 1 Button Transmitter DISCOUNTINUED BY MANUFACTURE

FAAC 1TM 418DS Transmitter Single channel transmitter – 418 Mhz Single channel transmitter – 418 Mhz Choice of over 1000 codes.12V battery included    ..

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC XT 1RP418DS Receiver DISCONTINUED BY MANUFACTURE

FAAC 1RP418DS Receiver for FAAC control panels. Use with 1TM418DS and 787317 transmitters.  ..

Upswung Residential or Commercial Complete Gate Entry and Exit Accessory package.  Includes intercom, loops,keypad and wireless receiver and transmitters

Upswung Residential or Commercial Complete Gate Entry and Exit Accessory package. Includes intercom, loops,keypad and wireless receiver and transmitters

This specially designed  package covers all of  your Commercial/Residential needs for Entry and Exit access control to and from your property. Whether it be a Swing Style or Slide Style or Barrier Operator this package offer is complete for a commercial activity envrioment that offers a security event control, tracking operation.   Please call for expert assistance regarding any and all Access Control devices or for package upgrades and specifice item information at 775-588-1..

Pach & Co UPM4S Universal Pedestal Mount (Standard) 47"H with 5"X5" Mount Base

Pach & Co UPM4S Universal Pedestal Mount (Standard) 47"H with 5"X5" Mount Base

Design for all Quantum products direct face-plate mounting and all AeGIS products with adapter plate Universal head face-plate: slot openings for mounting various manufacturers products Heavy duty 2-1/2" 11 gauge cold rolled steel tubing Heavy duty 10 gauge face-base plates and base cover Triple coat rust proof UV inhibitors enamel finish Stainless steel bolts and nuts included      ..

File Name Size Link
FAAC 844 Spec Brochure 0.15Mb download
FAAC 844 INstall Manual 0.68Mb download
FAAC 844 Cutsheet 0.15Mb download
FAAC 844 Manual 4.26Mb download