T he Model 390 electromechanical swing gate operator is designed for light duty, single family residential use. It is perfect on large pillar installations for small gate and carriage doors. Use to make the single kit into a master/slave (bi-parting) 24 lbs. (10.9kg) 24vdc kit; or use to order replacement operator. Order necessary length needed for system of two wire cable part #2197 for power and three wire cable part #2192 for limit switch at no charge; up to 40 ft per system and add 2 limit switches.
SPECIFICATIONS:
Duty Cycle: 100%
Max Gate Swing: 120 Degrees
Max Weight Per Leaf: 600 lbs
Max Length Per Leaf: 14 feet
Operating Temp: -4F - 131F
Absorbed Power: 3W
Protection Class: Nema 4x
Pach Co with a premier quality access control systems at the lowest price with the best customer service. Committed to fully serving the intercom systems industry, Pach & Co built their product line of Access Control systems , keyless entry, and other intercom systems.
QR4 Surface Mount Single tenant, no dedicated phone line required, hands free, surface mount, 12VAC, 20VA telephone entry system.
50 access code capacity(4-8 digit)
2 built-in form C dry contact relays
600 event record..
The Model AK-21W Exterior Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics.
Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp..
This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance.
Wall Mounted or Post Mounted (add posts below!)
Directional photocell with diagonal alignment
Angle of detection +- 4 degrees
Range: 100 ft
Obstacle Detection Time: 10ms
Housing Protection: IP 54
Required power supply: 24-35 VDC available on FAAC control..
Application: 1/4" wide saw cuts, gated facilities
The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
FAAC 1TM 418DS Transmitter Single channel transmitter – 418 Mhz
Single channel transmitter – 418 Mhz Choice of over 1000 codes.12V battery included
..
FAAC 1RP418DS Receiver for FAAC control panels. Use with 1TM418DS and 787317 transmitters.
..
Details
Repalces FAAC 2667 and 2665 Loop Detectors
11 Pin Plug in base. Automatic calibration when switching or setting, a USB interface for use with modern diagnostic and service.
The same features as the those it replaces.
..
File Name
Size
Link
FAAC 390 Spec Brochure
1.13Mb
download
FAAC 390 Install Manual
0.66Mb
download
FAAC 390 Cutsheet
1.13Mb
download
FAAC 390 Manual
4.06Mb
download