FAAC 400 CBAC 230V Standard Heavy Duty Hydraulic Operator w/ Arctic Oil  (Arm Only) 1042011677

FAAC 400 CBAC 230V Standard Heavy Duty Hydraulic Operator w/ Arctic Oil (Arm Only) 1042011677

Call for price

ACCESSORIES & RELATED MODELS

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

FAAC 400 Positive Stop 84-400 4 Rod Conceale 490109  d

FAAC 400 Positive Stop 84-400 4 Rod Conceale 490109 d

FAAC 400  Positve Stop Kit Product Description Internal Positive Stop For use with the model 400 EG and CBAC actuator Stainless steel construction Mounts with existing FAAC hardware and does not require additional mounting points Accommodates inward or outward Positive gate stops, which limit the travel of each gate leaf, are required in the opened and closed positions for all FAAC operators. In the past installers used post, rods or angles to make the gates stop ..

Linear AK-21W Exterior Digital Keypad ACP00750

Linear AK-21W Exterior Digital Keypad ACP00750

The Model AK-21W Exterior Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp..

EMX CarSense 202 Driveway Alert Sensor Gate Opener with 50 ft Lead-in

EMX CarSense 202 Driveway Alert Sensor Gate Opener with 50 ft Lead-in

The CarSense 202 Driveway Alert Sensor is based on the well known CarSense 101 design. It has single piece design, making installation easy. The CarSense 202 is suitable for many applications, including safety, security access control, and solar applications. *The Carsense 202 is Available with extended leads 100ft, 200ft Please call 775-588-1475 x 152       Benefits include: Sensing probe is buried to protect against vandalism Wide range of power supply..

Click the "Related Products" tab above for more choices

The FAAC Model 400 heavy duty hydraulic swing gate operator is specifically designed for situations needing maximum versatility, such as apartment, subdivision, commercial/industrial and certain residential applications, while also in a streamlined design. It's strength also makes the 400 ideal for large, ornate gates. A convenient manual release is standard on all models. Available for single swing gates or dual swing gates. Optional hidden internal positive stops are an available option.

The 400 model is a powerful hydraulic operator ideal for large ornate gates and perfect for situations needing up to 125 degrees of swing. Operator is mounted inside the gate but still allows gate to open to the inside or outside. A convenient manual release is standard. The versatile FAAC control panel allows for six operating modes, including garage-door-like operation and a hold open function

 Single Arm Only

  • Maximum Gate Swing: 115 degrees
  • Opening Time: 17 seconds
  • Maximum weight 1300 pounds per gate
  • Maximum length: 16 feet per gate
  • Cycles: 80 per hour
  • Dimensions: 40.5 x 3.35 x 3.35

hydraulic gate opener

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

FAAC 400 Positive Stop 84-400 4 Rod Conceale 490109  d

FAAC 400 Positive Stop 84-400 4 Rod Conceale 490109 d

FAAC 400  Positve Stop Kit Product Description Internal Positive Stop For use with the model 400 EG and CBAC actuator Stainless steel construction Mounts with existing FAAC hardware and does not require additional mounting points Accommodates inward or outward Positive gate stops, which limit the travel of each gate leaf, are required in the opened and closed positions for all FAAC operators. In the past installers used post, rods or angles to make the gates stop ..

Linear AK-21W Exterior Digital Keypad ACP00750

Linear AK-21W Exterior Digital Keypad ACP00750

The Model AK-21W Exterior Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp..

EMX CarSense 202 Driveway Alert Sensor Gate Opener with 50 ft Lead-in

EMX CarSense 202 Driveway Alert Sensor Gate Opener with 50 ft Lead-in

The CarSense 202 Driveway Alert Sensor is based on the well known CarSense 101 design. It has single piece design, making installation easy. The CarSense 202 is suitable for many applications, including safety, security access control, and solar applications. *The Carsense 202 is Available with extended leads 100ft, 200ft Please call 775-588-1475 x 152       Benefits include: Sensing probe is buried to protect against vandalism Wide range of power supply..

File Name Size Link
FAAC 400 Cutsheet 1.52Mb download
FAAC 400 Manual 1.01Mb download