Click Related Tab for more products
The FAAC Model 402 Swing Gate Operator is perfect for private residence. They offer the features of large swing gate openers in a compact form. These hydraulic swing gates are safer than many gate openers because they offer fewer "pinch points." Additionally these gate openers include a hydrualic bypass valve that allows you to still operate your gate during power failure. The FAAC 402 model can be mounted inside the gate and can still allow the gate to open inside or out. Additionally, these operators can be finished to blend into the gate. Choose between 115V and 230V. The FAAC 402 CBC Standard is for swing gates up to 10 feet and 900 lbs. 30 cycles per hour.
Positive Stops Required
Model 402 features include:
Designed for basic single family residential use
Can move a 900 pound gate leaf 90 degrees in 12 seconds
Hydraulic locking in the opened or closed positions
A convenient manual release is standard
A battery back-up unit is available
FAAC 402 SPECIFICATIONS:
Max Gate Length: 10
Max Gate Length w/ External Lock: 10
Maximum Force Output: 1550
Duty: Medium
Cycles Per Hour: 55
Power Supply Volts: 115V or 230V
Alt. Power Supply Source: BC Pro 1050 or 700i
Battery (AC Power Failure): No
Anti-Crushing Protection: Hydraulic Bypass +Electronic
End Travel Declaration: Timed
Rod-Effective Stroke (inches): 9
Max Opening Angle: 90
Built in Mechanical Stops: Optional (Model 80)
Life Expectations (cycles): 1,000,000 (10 years @ 280 cycles per day)
Transmission: Oil Bath
Two-Button Switch
Features:
.Switch rating: 250 VAC; 10 amps
.Indoor or outdoor use
.Painted aluminum
.Surface mounted
.Open buatton is N.O. (Normally Opened)
.Close button is N.O. (Normally Opened)
For use with B, C, and P FAAC control panel logics:
B = 3 momentary switches: open, close and stop
C = 2 continuous pressure switches: open and close;
P = 3 momentary switches: open, close.
Dimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep
(10.2 cm x 7.3 cm..
FAAC 402 Positve Stop Kit
Product Description
Internal Positive Stop
For use with the model 402 actuator
Stainless steel construction
Mounts with existing FAAC hardware and does not require additional mounting points
Accommodates inward or outward
Positive gate stops, which limit the travel of each gate leaf, are required in the opened and closed positions for all FAAC operators. In the past installers used post, rods or angles to make the gates stop at the corre..
The Model AK-21W Exterior Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics.
Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp..
FEATURES:
4 Channel capability/4buttons
Visor clip included
Dimensions: 2" x 2.5" x .5"
Transmitter XT4 works with the Receiver 433 RC Plug In Style..
This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance.
Wall Mounted or Post Mounted (add posts below!)
Directional photocell with diagonal alignment
Angle of detection +- 4 degrees
Range: 100 ft
Obstacle Detection Time: 10ms
Housing Protection: IP 54
Required power supply: 24-35 VDC available on FAAC control..
Application: 1/4" wide saw cuts, gated facilities
The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
File Name
Size
Link
FAAC 402 and 422 Spec Brochure
0.21Mb
download
FAAC 402 Install Manual
0.60Mb
download
FAAC 402/ 422 Cutsheet
4.16Mb
download
FAAC 402/ 422 Manual
0.91Mb
download