FAAC S450H CBAC 115V Replacement Hydraulic Operator  (arm only) 10410015

FAAC S450H CBAC 115V Replacement Hydraulic Operator (arm only) 10410015

Call for price

ACCESSORIES & RELATED MODELS

FAAC Hydraulic Fluid / Quart Monolec Oil for all FAAC Hydraulic Gate Openers 71714017

FAAC Hydraulic Fluid / Quart Monolec Oil for all FAAC Hydraulic Gate Openers 71714017

Monolec Hydraulic Fluid. This oil is the only recommended replacement fluid for all hydraulic gate operators...

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680,  (Replaces 2667 and 2665)

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680, (Replaces 2667 and 2665)

Details Repalces FAAC 2667 and 2665 Loop Detectors 11 Pin Plug in base. Automatic calibration when switching or setting, a USB interface for use with modern diagnostic and service. The same features as the those it replaces.  ..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

FAAC XT4 Wireless Receiver 433 RC Plug In Style  787741

FAAC XT4 Wireless Receiver 433 RC Plug In Style 787741

433 RC Plug in style Single Channel receiver works with the XT4 Transmitter..

FAAC E024U Loop Detector Rack 2670

FAAC E024U Loop Detector Rack 2670

NEEDED Detector Rack needed for EO24U Board if you desire to install loop detectors on the EO24U board...

FAAC E024U Control Board (enclosure not included) for FAAC S800H, S450H, S418, 770, 415 and 390 202025

FAAC E024U Control Board (enclosure not included) for FAAC S800H, S450H, S418, 770, 415 and 390 202025

The E024U control board can be used with all 24V electro-mechanical and hydraulic swing gate operators. It features easy programming with trimmers and dip switches, powerful switching power supply, one pushbutton automatic self-learning and built-in battery back-up. It operates 6 different operators of the 24V line (S800H, S450H, S418, 770, 415 and 390). The New E024U Control Board is designed to be used with the following FAAC Swing Gate Operators: S418 Electro-mechanical Operator S450H ..

Click on Related Tab for more products

FAAC S450H 24VDC Hydraulic Operator for residential/condominium and commercial swing-leaf gates with single-leaf maximum length of 14ft and single-leaf weight of 1,100lbs. Battery backup built in, and first set of batteries provided. A convenient manual release is standard on all models. Available for single swing gates or dual swing gates. Internal positive stops are are built in. Very accurate anti-crushing and reverse obstacles functions, and highly accurate position awareness, due to an integrated encoder. Gate speed and force are adjustable.
 

Features

  • Multi-position adjustable bracket
  • High opening speed, and adjustable
  • Integrated Encoder for accurate positioning and control
  • Manual release
  • Integrated opening/closing mechanical stops built in
  • UL991 safety standard compliant
  • Powerful and efficient Switching Power Supply
  • Easy programming with trimmers and dip switches
  • One pushbutton automatic self learning
  • Self resetting fuses
  • StandBy mode for efficient power use
  • Built in battery backup

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
FAAC Hydraulic Fluid / Quart Monolec Oil for all FAAC Hydraulic Gate Openers 71714017

FAAC Hydraulic Fluid / Quart Monolec Oil for all FAAC Hydraulic Gate Openers 71714017

Monolec Hydraulic Fluid. This oil is the only recommended replacement fluid for all hydraulic gate operators...

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680,  (Replaces 2667 and 2665)

FAAC Vehicle loop Detector, Plug-In Loop Detector 2680, (Replaces 2667 and 2665)

Details Repalces FAAC 2667 and 2665 Loop Detectors 11 Pin Plug in base. Automatic calibration when switching or setting, a USB interface for use with modern diagnostic and service. The same features as the those it replaces.  ..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

FAAC Photobeam  Set Factory Monitored 785163

FAAC Photobeam Set Factory Monitored 785163

This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance. Wall Mounted or Post Mounted (add posts below!) Directional photocell with diagonal alignment Angle of detection +- 4 degrees Range: 100 ft Obstacle Detection Time: 10ms Housing Protection: IP 54 Required power supply: 24-35 VDC available on FAAC control..

FAAC XT4 Wireless Receiver 433 RC Plug In Style  787741

FAAC XT4 Wireless Receiver 433 RC Plug In Style 787741

433 RC Plug in style Single Channel receiver works with the XT4 Transmitter..

FAAC E024U Loop Detector Rack 2670

FAAC E024U Loop Detector Rack 2670

NEEDED Detector Rack needed for EO24U Board if you desire to install loop detectors on the EO24U board...

FAAC E024U Control Board (enclosure not included) for FAAC S800H, S450H, S418, 770, 415 and 390 202025

FAAC E024U Control Board (enclosure not included) for FAAC S800H, S450H, S418, 770, 415 and 390 202025

The E024U control board can be used with all 24V electro-mechanical and hydraulic swing gate operators. It features easy programming with trimmers and dip switches, powerful switching power supply, one pushbutton automatic self-learning and built-in battery back-up. It operates 6 different operators of the 24V line (S800H, S450H, S418, 770, 415 and 390). The New E024U Control Board is designed to be used with the following FAAC Swing Gate Operators: S418 Electro-mechanical Operator S450H ..

File Name Size Link
FAAC S450 Spec Brochure 0.66Mb download
FAAC S450H Install Manual 1.50Mb download
FAAC S450H Cutsheet 0.51Mb download
FAAC S450H manual 9.72Mb download
FAAC E024U Control Board Manual 3.02Mb download